[Guide] Airport - PCIe Half Mini v2

[the-darkvoid]

toleda,

Great detailed feedback! I will check and verify if this can be resolved.
Strange behavior you are experiencing though . Indeed seems to be some problem with the patch.

 

[schoolbus11]

can anyone confirm that AR9285/AR5b95 works on Yosemite 10.10.1??
I've tried everything on my laptop but it just won't work.
it can read the card but it cannot find any network (just searching for network forever).

 

[RehabMan]

can anyone confirm that AR9285/AR5b95 works on Yosemite 10.10.1??
I've tried everything on my laptop but it just won't work.
it can read the card but it cannot find any network (just searching for network forever).

It works.

 

[the-darkvoid]

rishighan,

Remove "5ghz fix" from Clover patches and keep "Some fix".
You cannot have both at the same time.

 

[rishighan]

rishighan,

Remove "5ghz fix" from Clover patches and keep "Some fix".
You cannot have both at the same time.

Thanks darkvoid.
Before you replied, I looked at a config.plist file you edited for zoool and pasted in the patches in my config.plist file.
I did remove the duplicate patch.

Now, I have 5Ghz working, so I can get on my Airport Extreme powered 5Ghz WiFi connection.
Currently, the locale shows as Unknown and the country is XT in WiFi item in System Profiler.
I have the US-FCC patch in Clover, so I don't know why this is happening.
Regardless, 5Ghz is working and I am not too worried about this discrepancy.

Handoff is still not working, so want to get that to work...

 

[the-darkvoid]

rishighan,

For handoff / continuity:

Name: IOBluetoothFamily
Find: 4885C074 5C0FB748 1083C904 83F90675 50488B
Replace: 3EC683BC 02000002 41BE0F00 0000E94E 000000

 

[the-darkvoid]

Toleda,

I cannot reproduce the issue on my card.

My card says this during bootup:

IO80211AWDLPeerManager::configure Dynamic country code not supported on this device

So I guess thats why my card does not change country codes in between.

Can you test the following patch on your card? Again this is to change to "US".

Name: AirPortBrcm4360
Find: 41 83 FC FF 74 2C 48
Replace: 66 C7 06 55 53 EB 2B

 

[toleda]

My card says this during bootup:
Find: 41 83 FC FF 74 2C 48
Replace: 66 C7 06 55 53 EB 2B

Patch working. I get the same Console message during boot with both BCM94352 and AW-CE-123H.

 

[schoolbus11]

Can anyone tell me why my AR9285 doesn't work on my yosemite 10.10.2....

It can find and locate the driver but it cannot find any network to join. (forever scanning) I tried all of the things that are suggested, it just won't work!

What could be wrong?

 

[RehabMan]

Can anyone tell me why my AR9285 doesn't work on my yosemite 10.10.2....

It can find and locate the driver but it cannot find any network to join. (forever scanning) I tried all of the things that are suggested, it just won't work!

What could be wrong?

Verify hardware works on Windows first. Then do a fresh install of Yosemite. Install only toledaARPT.kext. Do not make any other changes to the networking kexts.