Contribute
Register

[Guide] Acer Aspire E1-570G OS X Yosemite (Clover)

Status
Not open for further replies.
I am having a problem: first time booting usb with install_osx in verbose mode, the process is stuck at "DSMOS has arrived" (before that there were some lines of "sound assertion in ...."), then the second time I was changing the boot options to try to understand what they do and I forgot the "try with injection", or something similar, checked. Is it bad?
Now the process is stuck at this
 

Attachments

  • screen 2 stuck.jpg
    screen 2 stuck.jpg
    349.4 KB · Views: 209
sirciori said:
I am having a problem: first time booting usb with install_osx in verbose mode, the process is stuck at "DSMOS has arrived" (before that there were some lines of "sound assertion in ...."), then the second time I was changing the boot options to try to understand what they do and I forgot the "try with injection", or something similar, checked. Is it bad?
Now the process is stuck at this
Click to expand...

Looks like a normal boot. Be patient. Booting the installer from USB is not quick.

Attach EFI/Clover folder as ZIP (omit 'themes' folder).

--

You forgot to fill out your profile as clearly requested in the guide.

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
 
RehabMan said:
Looks like a normal boot. Be patient. Booting the installer from USB is not quick.

Attach EFI/Clover folder as ZIP (omit 'themes' folder).

--

You forgot to fill out your profile as clearly requested in the guide.

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
Click to expand...

Signature and Zip updated
 

Attachments

  • CLOVER.zip
    1.8 MB · Views: 182
sirciori said:
Signature and Zip updated
Click to expand...

The Clover revision you have (v3726) is not recommended by the guide (guide recommends v3625).
Your config.plist is wrong for your hardware (no need for FakeID/IMEI).
 
Ok, so I will try with v3625, and do you know what is the right config.plist for my hardware?
 
Last edited:
sirciori said:
Well, now I understand... My PC has an Ivy CPU with a 6-series board
Click to expand...

Not according to your signature. Your signature says HM77, which is 7-series.

If your signature is incorrect, please fix it.
 
RehabMan said:
Not according to your signature. Your signature says HM77, which is 7-series.

If your signature is incorrect, please fix it.
Click to expand...
Ohhh ok, I was just watching the wrong number inside CPUz, my signature was correct, but then I chose the wrong config.plist.
I will try with the right config.plist now.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top