- Joined
- Apr 6, 2017
- Messages
- 80
- Motherboard
- Gigabyte GA-Z170X-UD5 TH (Clover)
- CPU
- i7-6700K
- Graphics
- GTX 1050 Ti
- Mac
- Mobile Phone
I downloaded IORegistryExplorer. Attached is a screenshot of what I think is the relevant section of the IO's that relate to USB. I collapsed a couple of the triangles (like Live! Cam Chat HD for example) so it would all fit on one page. I started experimenting with plugging a USB stick into the different ports to figure out which was which and writing a little map for myself. Contrary to what I said in an earlier post my USB ports were all active for a time (nothing to do with being previously asleep). I got part way through the mapping process and the USB3 ports ceased to work again. No idea why they were on then off again. Managed to map a few of them prior. For example Front Panel USB3 left is HS08@14800000 (not that I really know what that means ). I can see that some of the ports are internal like HS09 which I think is probably the one powering the bluetooth on my Fenvi WIFI card.
Anyway I'm assuming at this point that the USBInjectAll.kext has worked and that all my ports are seen albeit they aren't always working.
What is the next step?
Anyway I'm assuming at this point that the USBInjectAll.kext has worked and that all my ports are seen albeit they aren't always working.
What is the next step?
Attachments
Last edited: