Contribute
Register

[Guide] 10.11+ USB changes and solutions

Status
Not open for further replies.

Attachments

  • Dogman USB3c.zip
    639.4 KB · Views: 47
  • SSDT-XOSI.aml
    168 bytes · Views: 75
Dogman said:
Hey Rehabman!

Thank you for checking my files! I don't know why, but my SSDT_XOSI.aml was gone. I put the one from here http://www.tonymacx86.com/el-capitan-desktop-support/172337-el-capitan-usb-issues-possible-fix.html back in, but still no change. I attached a new ioreg. Would you mind to have a third look?

BTW: What do you mean by "big mistake". Is something broken now?

Cheers,
Dogman
Click to expand...

This ioreg (from Clover bootlog) shows SSDT-XOSI.aml loading.

But you didn't do any of my previous suggestions.
 
RehabMan said:
But you didn't do any of my previous suggestions.
Click to expand...

Thanks to you, I've got USB3 on my GA-Z87X-D3H running.
Kext I needed to install into EFI/CLOVER/kexts/10.11:
FakePCIID.kext
FakePCIID_XHCIMux.kext
USBInjectAll.kext

Custom Boot Flag:
-uia_exclude_hs

Three ACPI-Patches in clover config.plist and SSDT-XOSI.aml in EFI/CLOVER/ACPI/patched as described here: http://www.tonymacx86.com/el-capitan-desktop-support/172337-el-capitan-usb-issues-possible-fix.html

I hope it helps somebody. All credits and many thanks to RehabMan and matt77303
 
i'm read post 1
but usb2 not work :banghead:
what i can do ?
View attachment AHMED’s Mac Pro.ioregView attachment config.plistView attachment DSDT.aml
Screenshot at Mar 10 00-23-30.pngScreenshot at Mar 10 00-23-52.pngScreenshot at Mar 10 00-24-47.pngScreenshot at Mar 10 00-25-06.png
 
I've got Fresco Logic USB 3.0, any hopes to enable it with this guide? All other ports work OOB but USB 3.0.

EDIT. Nevermind, Generic USB 3 kext got it working... I thought it doesn't work for Fresco.
 
Leaffi said:
EDIT. Nevermind, Generic USB 3 kext got it working... I thought it doesn't work for Fresco.
Click to expand...

It depends on the device-id.

All FL devices (vendor-id 1b73) are black listed in my GenericUSBXHCI.kext except 1b73:1000.

Note that some FL devices are supported natively (FL1100), and some can be supported with an injector kext (I think FL1000 may be one of them).
 
So sorry :crazy:
I am a new user
Can you explain what should I do to fix usb2 problem step by step ?
 
nwera said:
So sorry :crazy:
I am a new user
Can you explain what should I do to fix usb2 problem step by step ?
Click to expand...

Read post #1. If you installed patched kexts, restore them to vanilla. Remove system kexts from EFI.
 
i delete all installed patched kexts and delete system kexts from EFI
but usb2 still not work
i read post 1 but am not understand what is the problem ?
i use USBXHCI_FL1009.kext if i remove it system rebooting not open
if i remove it and disable usb3 on bios system open but all usb not work
i used unibest for install el capitan : what can i do plz ?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top