Contribute
Register

Gtx 970 No Signal with DVI. HDMI works but wrong resolution

Status
Not open for further replies.
Joined
Sep 6, 2015
Messages
4
Mac
Classic Mac
Mobile Phone
Hi Community,

i installed El Capitan with Clover and almost everything works fine.
I use a Gigabyte Gtx 970 and connect it with Displayport ->mini Displayport. If i Boot the system, the monitor get no Signal and i have to unplug and plug the cable. Than it works.

If i use HDMI it works instant, but have the wrong resolution (2048x1152). I need 2560x1440.

With the Displayport i tryed a lot off different Boot Flags (nvpci, PCIRootUID, kext-dev-mod..) but nothing works. All the time i have to unplug the cable-.-

Maybe someone know this issue and can help?

My System:

i5 3570k
Gtx 970
MSI Z77a-g43
 
Joined
Jun 1, 2014
Messages
231
CPU
core2Quad q9650
Graphics
geforce 8800 gts
Mac
Classic Mac
Mobile Phone
Hi Community,

i installed El Capitan with Clover and almost everything works fine.
I use a Gigabyte Gtx 970 and connect it with Displayport ->mini Displayport. If i Boot the system, the monitor get no Signal and i have to unplug and plug the cable. Than it works.

If i use HDMI it works instant, but have the wrong resolution (2048x1152). I need 2560x1440.

With the Displayport i tryed a lot off different Boot Flags (nvpci, PCIRootUID, kext-dev-mod..) but nothing works. All the time i have to unplug the cable-.-

Maybe someone know this issue and can help?

My System:

i5 3570k
Gtx 970
MSI Z77a-g43
[READ ME FIRST!] Graphics Setup & Troubleshooting
 

slim.jim

Moderator
Joined
Dec 17, 2014
Messages
4,258
Motherboard
MSI Z97 Gaming 9 AC
CPU
i7-4790K
Graphics
RX 5700 XT
Mac
  1. MacBook Pro
Classic Mac
  1. PowerBook
Mobile Phone
  1. iOS
Hi Community,

i installed El Capitan with Clover and almost everything works fine.
I use a Gigabyte Gtx 970 and connect it with Displayport ->mini Displayport. If i Boot the system, the monitor get no Signal and i have to unplug and plug the cable. Than it works.

If i use HDMI it works instant, but have the wrong resolution (2048x1152). I need 2560x1440.

With the Displayport i tryed a lot off different Boot Flags (nvpci, PCIRootUID, kext-dev-mod..) but nothing works. All the time i have to unplug the cable-.-

Maybe someone know this issue and can help?

My System:

i5 3570k
Gtx 970
MSI Z77a-g43

Try changing the DP setting on your monitor. If it is 1.0 then try 1.2 and vice versa.
 
Status
Not open for further replies.
Top