- Joined
- Feb 5, 2011
- Messages
- 174
- Motherboard
- Gigabyte GA-Z77M-D3H
- CPU
- i7-3770
- Graphics
- GTX 780
- Mac
- Mobile Phone
Will this card have OpenCL issues like some GTX780 cards?
Will this card have OpenCL issues like some GTX780 cards?
Is it possible I'm doing something wrong when doing Fake ID: 0x100410DE in clover? I can't imagine that the frame buffer driver for the 780 wouldn't work with the 780 Ti...
Does the Titan work with Mavericks?
Well you're not booting with Chimera so, it's a little difficult to tell if the card will work or not. Did you try Chimera instead?
Yes the Titan works. It's been posted on the forum.
Most likely the 780 Ti isn't added yet. The Device id for that is 100A (10DE for the vendor).
Tony, is it possible to get that added to chimera? I'll give it a shot.
Also, the reason I'm using clover is because my new motherboard is uEFI, so I can't boot chameleon unless it's off a USB stick.
Unless I'm wrong, there aren't any device IDs included in the modern NVIDIA drivers- the devices don't have to be specifically added to any match list. And you won't need any GraphicsEnabler injection with 6xx/7xx Fermi cards anyhow. See here:
http://www.tonymacx86.com/graphics/...7xx-kepler-cards-work-graphicsenabler-no.html
I'd recommend a fresh installation- or unplug all drives and try to boot the UniBeast USB. It's formatted MBR, so you can test reaching the installer- you can even get system profiler information from the installer. Did you ever try booting from your integrated graphics as priority 1?
Lastly, I just put out a guide earlier this week about installing Chimera to the EFI partition. This works for ASUS 8-series motherboard issue with GPT partition method.
http://www.tonymacx86.com/401-install-bootloader-extra-efi-partition.html