- Joined
- Jul 30, 2015
- Messages
- 27
- Motherboard
- Gigabyte GA-Z97X-SLI
- CPU
- 4590
- Graphics
- 7770 HD
Hi guys,
Currently I get a grey screen when booting into hard drive. I've installed and when I use -x it boots perfectly fine, but not without it. I followed a tutorial on here to path my frame buffer from @carpentryplus25 Using Buri Framebuffer. Before I was getting a black screen after the apple logo and never got to the installation screen till now. I'm installing high sierra with Unibeast.
Kext used:
Verde
Lilu
WhateverGreen,
AMD7000Controller (patched)
FakeSMC
Specs:
CPU: Intel i5 -4590
Motherboard: Gigabyte GA-Z97X - SLI
GPU: AMD Radeon HD 7770 Sapphire.
I've been googling around for a bit, but I can't seem to solve my problem. I've also tried GraphicsEnabler=No and Yes neither worked. Disabling Lilu and/or Whatevergreen loads a black screen.
I also should note the grey screen sometimes has a glitched look: https://imgur.com/0D829j3
Like a bunch of random colors filling the screen. Remaining on that screen the colors sometimes change and change positions.I can also move my cursor.
And that I use -v, but it doesn't stop anywhere just goes to grey screen so I can't see any errors.
I'm using HDMI to a 1080P monitor I also have my BIOS set to disable internal graphics and load IGFX first.
Any help would be appreciated!
Currently I get a grey screen when booting into hard drive. I've installed and when I use -x it boots perfectly fine, but not without it. I followed a tutorial on here to path my frame buffer from @carpentryplus25 Using Buri Framebuffer. Before I was getting a black screen after the apple logo and never got to the installation screen till now. I'm installing high sierra with Unibeast.
Kext used:
Verde
Lilu
WhateverGreen,
AMD7000Controller (patched)
FakeSMC
Specs:
CPU: Intel i5 -4590
Motherboard: Gigabyte GA-Z97X - SLI
GPU: AMD Radeon HD 7770 Sapphire.
I've been googling around for a bit, but I can't seem to solve my problem. I've also tried GraphicsEnabler=No and Yes neither worked. Disabling Lilu and/or Whatevergreen loads a black screen.
I also should note the grey screen sometimes has a glitched look: https://imgur.com/0D829j3
Like a bunch of random colors filling the screen. Remaining on that screen the colors sometimes change and change positions.I can also move my cursor.
And that I use -v, but it doesn't stop anywhere just goes to grey screen so I can't see any errors.
I'm using HDMI to a 1080P monitor I also have my BIOS set to disable internal graphics and load IGFX first.
Any help would be appreciated!
Last edited: