Contribute
Register

[Great Build] mini HTPC: ASRock Z370M-ITX/ac - i5-8400 - UHD 630 Graphics - Mojave

Status
Not open for further replies.
Will this configuration work with Asrock Z370 Pro 4? Thanks!
not sure. most likely my config.plist will cause errors, so instead of coping mine, create your own
my config only contain:
layout 99 for applealc
inject intel=1
darkwake=8
macmini8,1 smbios
and hackintool patches
 
Last edited:
>BCM94352Z
exactly same

>kexts
BrcmFirmwareRepo.kext
BrcmPatchRAM2.kext
AirportBrcmFixup

all in /Library/Extension
but be sure kexts are installed correctly. take a look into my guide: you should copy them into install folder, then "sudo cp" them into /Library/Extensions
then perform "sudo kextcache -i /"
 
Hi I have a little question, I have this build : asrock Z370m itx + I7 8700 + vega 56.
When I start my computer, the system will shutdown after 5/10 seconds to reboot normally and display the bios / clover and macos. I dont know why. It do as well when I reboot in mac os.
Maybe its normal and it come from the motherboard. So if it is I supose you have it as well. Could you tell me if you have this case.
Thx.
 
ouh, you mean 'clover'...
select boot drive and stuff like recovery or single-user mode?
no bt support) usb only
It's possible to use BT keyboard in UEFI and Clover.
 
What is the power usage of this system? (For this moment I have an old Mac Mini late 2012, and it consumes 14 watts).
 
Hi I have a little question, I have this build : asrock Z370m itx + I7 8700 + vega 56.
When I start my computer, the system will shutdown after 5/10 seconds to reboot normally and display the bios / clover and macos. I dont know why. It do as well when I reboot in mac os.
Maybe its normal and it come from the motherboard. So if it is I supose you have it as well. Could you tell me if you have this case.
Thx.

Same problm for me :confused:
 
Hello
I have same config than you and last version of Mojave
I have problm with my USB 3 ports

If i put usb2 Peripheral on usb2 or usb3 it work
If i put ubs3 Peripheral on ubs2 port it work
If i put ubs3 Peripheral on ubs2 port it not work !!!

I use Hackintool for create USBPorts.kext and i putit on EFI > EFI > CLOVER > Kext

396254



Before mojave i use
XHCI-200-series-injector.kext
&
USBInjectAll.kext

Thank for your help
 
@Julienanglet Oh all right ! But I would like to know your stuff about the problem of 2 reboot when started. I have ASRock Z370M-ITX/ac, Node 202 fractal, Corsair SF600 PSU.
For your usb problem i havent anything but didnt really test that..

I dont understand this sentence. So sometimes its work sometimes not ?
<<If i put ubs3 Peripheral on ubs2 port it work
If i put ubs3 Peripheral on ubs2 port it not work !!!>>
 
Status
Not open for further replies.
Back
Top