Contribute
Register

<< Solved >> Graphics : Nvidia Geforce GT 1030 | Not Working On Sierra 10.12.6

Status
Not open for further replies.
Joined
Apr 13, 2019
Messages
20
Motherboard
GIGABYTE Z390 UD
CPU
i3-8100
Graphics
GT 1030
Mac
  1. iMac
  2. MacBook Air
Mobile Phone
  1. Android
Hi Community,

I'm facing with huge issue and i can't able to fix it please community help me regarding this.
After loading in Clover Bootloader then i go for external drive(bootable flash drive), So there apple logo loads and i get stucked after apple logo it shows stop sign !!
Please help Me Regarding this error !!!

After that i rode some threads regarding this issue so i try to load into Verbose Mode and that's the issue !!

I will be very thankful to you !!
If you'll help mehh!!
 

Attachments

  • Sierra Error.jpeg
    Sierra Error.jpeg
    1.1 MB · Views: 645
i get stucked after apple logo it shows stop sign

Stop vs Prohib.png



It is not a Stop Sign.

Probable cause is wrong memory fix driver in /EFI/CLOVER/drivers64UEFI/.
With a Z390 board you should use OsxAptioFix2Drv-free2000.efi - See nickwoodhams.com.
Remove any of OsxAptioFixDrv, OsxAptioFix2Drv, OsxAptioFix3Drv or AptioMemoryFix-64.
 
These Files in Clover/ Drivers64uefi/
I replaced with old one and putted OsxAptioFix2Drv-free2000.efi
 
View attachment 406877


It is not a Stop Sign.

Probable cause is wrong memory fix driver in /EFI/CLOVER/drivers64UEFI/.
With a Z390 board you should use OsxAptioFix2Drv-free2000.efi - See nickwoodhams.com.
Remove any of OsxAptioFixDrv, OsxAptioFix2Drv, OsxAptioFix3Drv or AptioMemoryFix-64.

These Files in Clover/ Drivers64uefi/
I replaced with old one and putted OsxAptioFix2Drv-free2000.efi
 

Attachments

  • Screenshot 2019-05-19 at 3.24.57 PM.png
    Screenshot 2019-05-19 at 3.24.57 PM.png
    1.4 MB · Views: 409
Finally, I Installed Successfully Thanks To The Community and I will share this On My Instagram Story that Everyone needs to join this community for building Perfect Hackintosh.

AND MOST IMPORTANT PART THAT I AM UNABLE TO ACCESS GRAPHICS CARD WITH PASCAL GPU ( GEFORCE GT 1030)
CAN ANYONE PLEASE HELP ME REGARDING THIS....!!
I NEED YOUR HELP :(
AND IN ABOUT THIS MAC SECTION .....THERE IS SHOWING IN GRAPHICS COLUMN DISPLAY 7 MB ...!!
AND I HAVE ALSO INSTALLED THE DRIVERS ACCORDING TO MY BUILD NUMBER BUT THEN ALSO IT SHOWING DISPLAY 7 MB ....!!

PLEASE HELP ME REGARDING THIS !!
 

Attachments

  • Display Error 1.jpeg
    Display Error 1.jpeg
    2.8 MB · Views: 333
  • Display Error 2.jpeg
    Display Error 2.jpeg
    2 MB · Views: 510
  • Display Error 3.jpeg
    Display Error 3.jpeg
    5.6 MB · Views: 556
  • Display Error 4.jpeg
    Display Error 4.jpeg
    3.9 MB · Views: 471
  • Display Error 5.jpeg
    Display Error 5.jpeg
    1.5 MB · Views: 331
  • Display Error 6.jpeg
    Display Error 6.jpeg
    5.4 MB · Views: 399
  • Display Error 7.jpeg
    Display Error 7.jpeg
    2.6 MB · Views: 387
Dependencies :
1. Native NVRAM support or an emulation of same - Test
2. At least 10.12.4.
3. The correct web drivers matched to the OS build number.
4. No use of nv_disable=1.
5. NvidiaWeb=true in config.plist.
6. May need SIP fully disabled - CsrActiveConfig=0x67.
7. May need latest Lilu.kext and WhatEverGreen.kext.
 
Again it is also not showing the display ....
My graphics is not enabled properly, i have followed all your steps then also it is not showing display properly.
after following your all steps i installed web driver according to, my build number....

Please help me ...!!
 

Attachments

  • Display Error 8.jpeg
    Display Error 8.jpeg
    2 MB · Views: 291
Okay Finally I've successfully installed Sierra 10.12.6 with Best Drivers and Installed Using Multibeast with
UEFI boot mode + Emulated NvRam....!!

By this edits finally i've successfully installed graphics card in it !!

Thanks Community For So Much Help ...!!
Love This Community !!:headbang:
 
Can u discrib how Nvidia Graphics card GT1030 enabled in high Sierra
 
Status
Not open for further replies.
Back
Top