Graphics issue GA-Z87M-D3H+ Asus GT 640 2GB Yosemite Clover

[avi_31337]

I've installed Yosemite with clover and I having issues with graphics. If I connect with Intel graphics it is working fine, my Nvidia graphics card is creating problems. It is really slow and taking super long for graphics. My 2nd monitor connected via HDMI was not working at all. In BIOS I've disabled Intel graphics and set my graphics card as primary.

I tried GraphicsEnabler = NO and nvda_drv=1 seperately but no luck.

Check these screenshots
https://imgur.com/gallery/QBsgQ/


Check the attached video to make good sense of what I am talking.
http://youtu.be/M0b3w3P6FqQ

 

[lroy12]

I have the same issue
Let me know if you have figured out anything. i am running chameleon in the interim

 

[iridescentFUZZ]

Got the same mobo-CPU setup as you, Asus GTX 650 GPU. I'm having a similar problem, though I did my install as an upgrade, using Unibeast and Multibeast.

With the GPU installed, and any number of monitors connected via GPU, the Yosemite loading bar completes, but then the display goes completely black and the monitors display "No Signal".

When I connect one monitor to either DVI or VGA port on the motherboard, the display works and the system boots properly. If I connect any more than one, it freezes midway through the Yosemite loading bar.

I've also tried messing with GraphicsEnabler and nvda_drv. I did the upgrade with my GPU removed from the system, so I'm not sure if that's what caused it. I will be doing a reformat+reinstall soon.