- Nov 11, 2018
- Asus ProArt Z690-Creator
- RX 6800 XT
- Classic Mac
- Mobile Phone
Creating an array will format the drives. But there's little point doing that for your main drive.Never tried this before . If I already have a main macOS disk and have another spare identical disk can you turn it into a raid array or I need to format both and start over
That problem remains, but a different one has been fixed after fixing ACPI table load errors. Namely, my 4K monitor no longer says “Index out of range” when rebooting. This required me to restart the monitor after every reboot.For Monterey, does the problem "You shut down your computer because of a problem" fix?
Hope next release of Opencore fixes the rest problem. Can't wait to place the orderThat problem remains, but a different one has been fixed after fixing ACPI table load errors. Namely, my 4K monitor no longer says “Index out of range” when rebooting. This required me to restart the monitor after every reboot.
Good news! Now I can update the Thunderbolt section in Tech Talk (post 1) by recommending both GC-Alpine Ridge and GC-Titan Ridge. The lesson is to avoid SSDT-TbtOnPch.Alpine Ridge is working incredible good in Monterey with Z690 Aorus Master. I flashed GC-ALPINE-RIDGE-NVM21-V3-NATA.bin by @NorthAmTransAm. I use Alpine Ridge SSDT-TB3-HackinDROM.aml adapted to Z690. I have VTD enable, but untouched DMAR.
Thunderbolt, USB2,3, hot-plug, sleep, wake, regain TB and USB devices after boot. TB+USB work also in Ubuntu. USB works in Windows (TB no).
What doesn't work:
Warm boot (don't know why for now). I need to make cold boot (I need help here).
I'll update this post if something deserve to apear here.
It works better then in Z390.
Screen pictures made after wake.
Update1: Warm boot works for macOS and TB bus persist, but USB bus doesn't. I need to reboot whit TB3 Dock disconnected.
I just tried the following experiment successfully:@CaseySJ have you ever try connecting the AMD 6800 XT to a TV or 2nd monitor with HDMI port? Mine works but when it wakes from sleep it goes to a black screen for both displays. I tried disconnecting all display cable and only replugged the main DisplayPort but it still won’t turn on. I can ssh into the box and still use it so it’s just a matter of the display output not working . This is only a problem that I experienced on Monterey. Big Sur did not have this issue for me. However, Big Sur AMD 6000 series are unstable for me for video transcoding task.
FYI. I haven’t tested this on the new Z690 since I don’t have access to a TV until tomorrow.