Contribute
Register

Gigabyte Z68MA-D2H-B3 -F10

Joined
May 12, 2011
Messages
4
Motherboard
GA-Z97X-UD3H
CPU
i7
Graphics
GTX 970
Mac
Mac Pro
tonymacx86 posted this on the UniBeast 3 Guide thread. Be aware of the changes.

tonymacx86 said:
Just a reminder- we've switched up the default boot flags to GraphicsEnabler=No IGPEnabler=Yes. You may need to use alternate flags at the boot screen.

If you have a UEFI based system, such as Gigabyte Z77 and Z87,

GraphicsEnabler=Yes

may be needed for NVIDIA 9xxx, 2xx, 4xx, 5xx graphics cards to boot the installer.


If you have an older Award BIOS, such as Gigabyte P55 or Z68,

GraphicsEnabler=Yes PCIRootUID=1

may be necessary with NVIDIA 9xxx, 2xx, 4xx, 5xx graphics cards to boot the installer.
Tony mac posted this on the UniBeast install thread. Be aware of the changes.
Since i was running a gtx465 i needed to modify these flags.
Spent like 3 hours trying to figure this out.

oddly enough i used GraphicsEnabler=No and npci=0x2000, sometimes i could get it to start but when installing multi beast it did not boot correctly.

I hope it helps.
 
Top