CaseySJ
Moderator
- Joined
- Nov 11, 2018
- Messages
- 22,184
- Motherboard
- Asus ProArt Z690-Creator
- CPU
- i7-12700K
- Graphics
- RX 6800 XT
- Mac
- Classic Mac
- Mobile Phone
Hello @jimbojingle,...
Do you have any idea why might be the cause of my Z490 System hanging on the Gigabyte Splash Screen? It always works eventually after one or more Resets/Reboots but never first time every time! Really frustrating for such a great build!
...
Let's start from the beginning on this issue. Some basics first:
- Which version of BIOS is installed on your Z490 Vision D?
- Is the Thunderbolt firmware flashed?
- What is the make/model of your GPU?
- What is the make/model of your monitor?
- Which video connector are you using? HDMI, DisplayPort, DVI?
- What other PCIe cards are installed?
- Fenvi WiFi/BT?
- Anything else?
- What devices are connected to the internal USB 2.0 headers?
- Fenvi Bluetooth?
- Anything else?
- What Thunderbolt devices are connected to the system?
- What are the makes/models of all NVMe SSDs in your system?
- In BIOS, is CSM Support enabled or disabled?
- In BIOS, is Thunderbolt Boot Support enabled? If so, what is it set to? Boot Once? Boot ACL?
- Have you already tried re-flashing the BIOS?
- Have you already tried CMOS Reset?