Contribute
Register

Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

My setup does not go to sleep at all. Have you guys ever faced with this problem?
This is most often caused by USB devices. What USB devices are connected to the internal USB header and to external USB ports?
 
HI all,

I know that the recommendations when it comes to BIOS is to stick to F5. Is anybody running their config with F20? The reason I am asking is that, when booting my system with my 6800XT, I have no video until macOS is loaded. I mentioned recently that I fixed it by running 2 PCIe power cables to the video card rather than one with a splitter, and also unplugging/plugging the monitor but it worked only once. I tried to reboot the system so that I could boot Windows 10 but same problem reappeared. Reading several posts in the net, a few people fixed the issue by flashing the BIOS to the latest version (not necessary on a Z490). Just curious to see if people on this forum are running the Z490 with the latest BIOS which is F20. Thanks.
f20 is working now. Also, with f20, if you enable VT-d, you get kernel DMA protection for Thunderbolt in Windows, if you care about such things.
 
HI all,

a few people fixed the issue by flashing the BIOS to the latest version (not necessary on a Z490). Just curious to see if people on this forum are running the Z490 with the latest BIOS which is F20. Thanks.

I'm running f20 on a Z490 Vision G and it works very well, no problems with macOS or Windows. However, Z490 Vision G does not have built in TB3 so that may be a factor ....

Cheers
Jay
 
Hi

I tried 4 times to update to Big Sur 11.4 (Opencore 0.6.9).

Every time I have one crash during the upgrade, but then installation continues.
After installation it will crash and reboot after every login.

I was trying to update from Big Sur 11.3.1 on my Z490 Vision D which was rock steady.

Anyone had this issue ?
After the system crashes and restarts, are you able to see the crash log?

Big Question: Did you make a full bootable backup before installing 11.4?
 
This is most often caused by USB devices. What USB devices are connected to the internal USB header and to external USB ports?
Thank you for your help. I can share my USB list via Hackintool. Should I provide more information?

Here is my USB list from Hackintool.

BTW, I know, I have to share my EFI. I will manage a repository. I will attach the link.
Screen Shot 2021-05-29 at 16.43.58.png
 
Last edited:
Thank you for your help. I can share my USB list via Hackintool. Should I provide more information?

Here is my USB list from Hackintool.

BTW, I know, I have to share my EFI. I will manage a repository. I will attach the link.
Unfortunately the Hackintool screenshot does not provide the necessary details. Simply list the makes/models of all devices connected to your internal and external USB ports.
 
Unfortunately the Hackintool screenshot does not provide the necessary details.
Sorry, I do not know how to take an approach to solve this problem. My previous mobo simply works OOB.

Simply list the makes/models of all devices connected to your internal and external USB ports.
I know it's weird but, it does not go to sleep at all if I extract all the USB devices.
I am using no USB SSDT, my point was to gain BT access. But I think my approach is wrong.

I can provide my sleep logs. And how can I list my USB devices programmatically?

Here are my assertions;

sckn@Arceus  ~  pmset -g assertions  ✔  1717  20:50:10 2021-05-29 20:50:19 +0300 Assertion status system-wide: BackgroundTask 1 ApplePushServiceTask 0 UserIsActive 1 PreventUserIdleDisplaySleep 1 PreventSystemSleep 0 ExternalMedia 0 PreventUserIdleSystemSleep 0 NetworkClientActive 0 Listed by owning process: pid 280(mds_stores): [0x00003cf9000b9239] 00:00:00 BackgroundTask named: "com.apple.metadata.mds_stores.power" pid 153(hidd): [0x00003b890009914b] 00:00:39 UserIsActive named: "com.apple.iohideventsystem.queue.tickle serviceID:1000004a9 name:AppleUserHIDEventSe product:USB Gaming Mouse eventType:17" Timeout will fire in 20 secs Action=TimeoutActionRelease pid 8108(stremio): [0x00002b5a00058df3] 01:15:11 NoDisplaySleepAssertion named: "Disable Screensaver" pid 131(apsd): [0x00003cf8000b9238] 00:00:00 ApplePushServiceTask named: "com.apple.apsd-recreatecourierstate-push.apple.com" pid 131(apsd): [0x00003cf8000b9231] 00:00:01 ApplePushServiceTask named: "com.apple.apsd-datareceived-push.apple.com" No kernel assertions. Idle sleep preventers: IODisplayWrangler

Time stamp Domain Message Duration Delay ========== ====== ======= ======== ===== UUID: F35EB0A5-5A67-4910-A2DE-8E18249A8FA3 2021-05-29 20:51:58 +0300 Notification Display is turned off 2021-05-29 20:51:58 +0300 Assertions PID 8108(stremio) Summary NoDisplaySleepAssertion "Disable Screensaver" 01:16:49 id:0x0x500008df3 [System: PrevDisp kDisp] 2021-05-29 20:51:58 +0300 Assertions Kernel Idle sleep preventers: -None- 2021-05-29 20:51:58 +0300 Assertions [System: PrevDisp kDisp] 2021-05-29 20:51:58 +0300 Assertions PID 110(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00 id:0x0xd00009259 [System: PrevDisp SRPrevSleep kCPU kDisp] 2021-05-29 20:51:58 +0300 Assertions [System: PrevDisp SRPrevSleep kCPU kDisp] 2021-05-29 20:51:58 +0300 Assertions [System: PrevDisp SRPrevSleep kCPU kDisp] 2021-05-29 20:51:58 +0300 Assertions [System: PrevDisp SRPrevSleep kCPU kDisp] 2021-05-29 20:52:13 +0300 Assertions PID 110(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0x0xd00009259 [System: PrevDisp SRPrevSleep kCPU kDisp] 2021-05-29 20:54:28 +0300 Assertions PID 153(hidd) Created UserIsActive "com.apple.iohideventsystem.queue.tickle serviceID:100001039 name:AppleUserHIDEventSe product:USB Receiver eventType:3" 00:00:00 id:0x0x90000926c [System: PrevDisp DeclUser kDisp] 2021-05-29 20:54:28 +0300 Assertions Kernel Idle sleep preventers: IODisplayWrangler 2021-05-29 20:54:28 +0300 Notification Display is turned on 2021-05-29 20:54:28 +0300 Assertions PID 209(coreaudiod) Released PreventUserIdleSystemSleep "com.apple.audio.context715.preventuseridlesleep" 00:10:05 id:0x0x10000920e [System: PrevDisp DeclUser kDisp] 2021-05-29 20:54:28 +0300 Assertions PID 209(coreaudiod) Released PreventUserIdleSystemSleep "com.apple.audio.context725.preventuseridlesleep" 00:10:05 id:0x0x10000920d [System: PrevDisp DeclUser kDisp] 2021-05-29 20:54:28 +0300 Assertions PID 209(coreaudiod) Released PreventUserIdleSystemSleep "com.apple.audio.context727.preventuseridlesleep" 00:10:05 id:0x0x100009210 [System: PrevDisp DeclUser kDisp] 2021-05-29 20:54:28 +0300 Assertions PID 209(coreaudiod) Released PreventUserIdleDisplaySleep "com.apple.audio.context715.preventuseridledisplaysleep" 00:10:05 id:0x0x500009211 [System: PrevDisp DeclUser kDisp] 2021-05-29 20:54:28 +0300 Assertions PID 209(coreaudiod) Released PreventUserIdleDisplaySleep "com.apple.audio.context725.preventuseridledisplaysleep" 00:10:05 id:0x0x50000920f [System: PrevDisp DeclUser kDisp] 2021-05-29 20:54:28 +0300 Assertions PID 209(coreaudiod) Released PreventUserIdleDisplaySleep "com.apple.audio.context727.preventuseridledisplaysleep" 00:10:05 id:0x0x500009212 [System: PrevDisp DeclUser kDisp] 2021-05-29 20:54:28 +0300 Assertions PID 209(coreaudiod) Released PreventUserIdleSystemSleep "com.apple.audio.context726.preventuseridlesleep" 00:10:05 id:0x0x100009213 [System: PrevDisp DeclUser kDisp] 2021-05-29 20:54:28 +0300 Assertions PID 209(coreaudiod) Released PreventUserIdleDisplaySleep "com.apple.audio.context726.preventuseridledisplaysleep" 00:10:05 id:0x0x500009214 [System: PrevDisp DeclUser kDisp] 2021-05-29 20:54:30 +0300 Kernel Client Acks Delays to Sleep notifications: [AMDFramebufferVIB driver is slow(msg: SetState to 1)(1331 ms)] [duet is slow(5146 ms)] [AppleHDADriver driver is slow(msg: SetState to 0)(1635 ms)] [AppleHDADriver driver is slow(msg: SetState to 1)(2136 ms)] 2021-05-29 20:54:38 +0300 Assertions PID 178(loginwindow) Created UserIsActive "Loginwindow User Activity" 00:00:00 id:0x0x900009292 [System: PrevDisp DeclUser kDisp] 2021-05-29 20:54:38 +0300 Assertions PID 178(loginwindow) Released UserIsActive "Loginwindow User Activity" 00:00:00 id:0x0x900009292 [System: PrevDisp DeclUser kDisp] 2021-05-29 20:55:05 +0300 : Showing all currently held IOKit power assertions Assertion status system-wide: BackgroundTask 0 ApplePushServiceTask 0 UserIsActive 1 PreventUserIdleDisplaySleep 1 PreventSystemSleep 0 ExternalMedia 0 PreventUserIdleSystemSleep 0 NetworkClientActive 0 Listed by owning process: pid 153(hidd): [0x00003df20009926c] 00:00:37 UserIsActive named: "com.apple.iohideventsystem.queue.tickle serviceID:100001039 name:AppleUserHIDEventSe product:USB Receiver eventType:3" Timeout will fire in 23 secs Action=TimeoutActionRelease pid 8108(stremio): [0x00002b5a00058df3] 01:19:57 NoDisplaySleepAssertion named: "Disable Screensaver" Kernel Assertions: 0x4=USB id=506 level=255 0x4=USB mod=1.01.1970 02:00 description=com.apple.usb.externaldevice.14730000 owner=USB Gaming Mouse Idle sleep preventers: IODisplayWrangler
 
Last edited:
Does anyone have issue with QuickTime ?

I have no sound in QT Player when I'm choosing my audio device as output. Also I have no sound in Viber during audio messages playback (I suppose this s because Viber uses QT to play them)
With HDMI output on TV QuickTime plays videos with sound.

On other apps (e.g., Safari/HDMI5 videos, VLC) everything is working fine.
 
I have no sound in QT Player when I'm choosing my audio device as output. Also I have no sound in Viber during audio messages playback (I suppose this s because Viber uses QT to play them)
With HDMI output on TV QuickTime plays videos with sound.
I assume you have AppleALC in your setup. Did you inject AlcId?
 
I assume you have AppleALC in your setup. Did you inject AlcId?
No, I have AppleALC only.

I'm using discrete audio card SB Audigy, so I disabled onboard chip in BIOS and removed layout-id/device_type/model injection from DeviceProperties/Add and Audio section from UEFI

For my audio device I'm using kx audio driver installed onto L/E
 
Back
Top