- Joined
- Oct 20, 2019
- Messages
- 24
- Motherboard
- Gigabyte Z490 Vision G
- CPU
- i5-10400
- Graphics
- RX 580
What about Z590 itx?))
I mean the Z590 Vision D boards work okay, let me be clear. But the BIOSs are still in beta, even though Rocket Lake launched at the end of March, and z590 launched months ago.What about Z590 itx?))
Hey CaseySJ. I have the Z390 Designare and have been using the OpenIintel 1.3 driver since it came out but when I do the update to the 2.0 Alpha, the WiFi driver doesn't seem to load. Is there something special I need to do for my board or is this Big Sur 11.3 specific?** Speed Tests and Observations with New OpenIntelWireless 2.0.0-alpha Drivers **
Finally we have 192 Mbps/201 Mbps!! Much faster than Fenvi FV-T919
802.11ac works, but I don't have 802.11ax so cannot test
See below (may need to disable 2.4 GHz SSID on some routers)
...
The specs are correctly listed:
- AX201 is an Intel CNVi module
- AX200 is a regular M.2 Key A/E module (this is nice because we can replace it with BCM94360NG, which is a natively supported Broadcom 802.11ac/BT 4.x module)
Do you mean to say that you’re running Big Sur 11.2 and the Big Sur version of the driver fails to load?Hey CaseySJ. I have the Z390 Designare and have been using the openintel 1.3 driver since it came out but when I do the update to the 2.0 alpha, the WiFi driver doesn't seem to load. Is there something special I need to do for my board or is this Big Sur 11.3 specific?
Yes that should work. However I do not have a Z590 Vision D so haven’t tested it first hand.So if I understand correctly, it would just be a matter of swapping the M.2 card and could use the same antenna.
If so, would this card be a suitable replacement for the Z590's AX200? It's a Youbo which I think some were using as a replacement Fenvi, and it's the cheapest BCM93460NG I saw on Amazon.
https://www.amazon.com/dp/B083YXS7VF/?tag=tonymacx86com-20
Yes. But the 1.3 version of the driver for Big Sur was working prior to swapping out the updated 2.0 kext.Do you mean to say that you’re running Big Sur 11.2 and the Big Sur version of the drover fails to load?
Yes indeed I have!Hello everyone,
Has anyone tried using the Intel AX200 based Fenvi FV-AX3000 PCI-E?
macOS 11.3 will be released any day now. I'm running the release candidate at the moment, but I suspect the problem you mention lies elsewhere.Yes. But the 1.3 version of the driver for Big Sur was working prior to swapping out the updated 2.0 kext.