- Joined
- Oct 24, 2013
- Messages
- 1,251
- Motherboard
- Asus ROG Z690 Formula
- CPU
- i9-13900K
- Graphics
- RX 6900 XT
- Mac
- Mobile Phone
Vision G BIOS F8c and above have the PCIe option removed, If you install a graphics card, it will work out of the box.
On the F20 bioses, you must temporarily enable CSM to enable the option to select iGPU as initial display output... earlier bioses didn't have to do this.Hello, everyone. I have may have a strange question.
I bought Z490 Vision G and i5-11600k. To use this CPU, I had to upgrade the BIOS and because I don't have 10th gen.
I had to use the Qflash with USB BIOS update without CPU and RAM and GPU which worked. I ended to updating to the last BIOS version F20b. But the thing is, and I don't know or its only here with me or all Z490 vision G boards, are like that
I DON'T NOT HAVE THE OPTION IN BIOS FOR PCIE 1 SLOT AT ALL.
Like you can see in the photo here ( 1: intial Display, Output and next below is the 2: Internal Graphics, this photo is from CaseySJ's: guide out his Z490 Vision D which has that option and even my old Z.board from 2013 has that option
but i dont have that there by settings i have only Internal Graphics. option. anyone knows why or who has the same MB like mine and can look or make a photo to see or is the same like me, cause i cant change the Graphics inside bios
thanks in advance everbody.
View attachment 514897
Once you enable CSM, you don't have to save/exit. Just enable enable CSM, go back to the menu with the graphics and choose your initial display output, then go back and disable CSM, save, exit, and you're good to go.
Also, is Rocket Lake's UHD 750 iGPU working with Big Sur.... I thought it wasn't?