- Joined
- Mar 30, 2021
- Messages
- 60
- Motherboard
- Gigabyte Z490 Vision D
- CPU
- i9-10850K
- Graphics
- RX 6900 XT
- Mac
Thank you so much, I used MSI Optix MAG27CQI know AMD GPUs are very expensive and very difficult to find at this time so I will harp about getting one! Instead, to make the best of the UHD 630 at this time, here are some things to try. No guarantees they'll work, but they're worth doing:
If no help, try adding these Boot Args to OpenCore config.plist (one at a time):
- BIOS Setup --> Increase DVMT Pre Alloc.
- BIOS Setup --> CSM Support --> Enabled.
If no help, then try these Boot Args as well (one or both at the same time is okay):
- gfxrst=1
- gfxrst=4
By the way, what is the make/model of your monitor?
- igfxagdc=0
- igfxonln=1
And are you using HDMI or DisplayPort (with a USB-C to DP cable)?
The NZXT Kraken Z73 is supported in macOS through Jonas Malaco's liquidctl. Instructions for installing and configuring it are located here:
Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580
@CaseySJ, did you have the opportunity to test the behavior of the LED controller? I also noticed that when the PC wakes up, the LED color settings are also reset. Yes, I see the same behavior. When system sleeps, the devices on all USB ports are ejected. I believe this causes the ITE Tech...www.tonymacx86.com
However, for information about controlling the Kraken Z73, please see:
liquidctl/docs/kraken-x3-z3-guide.md at main · liquidctl/liquidctl
Cross-platform CLI and Python drivers for AIO liquid coolers and other devices - liquidctl/liquidctlgithub.com
and here is the link: https://www.newegg.com/p/N82E16824475009
I am currently using DisplayPort(with a USB-c to DP cable)
I have tried USB-c to HDMI cable in the past and find it has a black screen that appears on the login page more frequently than the USB-c to DP port. Also, the black screen issue does not happen every time I turn on my Hackintosh, it only happens sometimes(like 1/3 possibilities, and if turn off my monitor and turn it back on, then it will resolve the issue) Also, I sort to find the solution on not having DP/HDMI audio sound output. I noticed that if I plug in both HDMI and USB-c to DP cable to the motherboard, then it will show up under the sound audio output setting, however, it will show two HDMI and DP output.