- Joined
- Jul 14, 2020
- Messages
- 211
- Motherboard
- Gigabyte Z490 Vision D
- CPU
- i7-10700K
- Graphics
- RX 6800
- Mac
- Mobile Phone
The highlighted line indicates a GPU driver issue. PEG0 is Slot 1 where the GPU is installed. What is the make/model of the GPU?
View attachment 494942
After checking my Power Management settings in Terminal with pmset -g, I noticed that standby, hibernatemode etc were set to 1. So I changed the relevant ones to 0 (sudo pmset -a hibernatemode 0 standby 0 autopoweroff 0) and put my computer to sleep last night. I woke up this morning to the sound of the fans spinning up but no monitor output (I should also note that I generated new serial numbers recently, and upon signing back into iCloud, I enabled Find My Mac - so I'm assuming the Darkwakes every two hours in the new sleep log are due to this). I was intrigued, so I left it to do its thing, and sure enough, after a little while the fans stopped spinning and the mobo lights went off again, and the machine was back to sleep. I waited a few mins then went to wake up the machine, and to my surprise I got a monitor signal! "Great, overnight sleep is finally working!" I thought. Only for the display to turn black again just as I started typing in my password, and it never came back on, so I had to restart the system by holding the case power button.
So the RX580 is definitely capable of waking from a long sleep, as I did have a monitor signal, if only for 3 or 4 seconds before the screen went black again. I did try power cycling the monitor, and unplugging and replugging it back into the GPU in case that helped, but unfortunately I had to just restart the computer again.
Here is the Sleep-log in full (including this morning's shenanigans)
Attachments
Last edited: