Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

[inapis.crazy]

My hackintosh recently lost the ability to Wake On LAN after upgrading to Monterey 12.5.1 from Big Sur 11.6.8. Wake on LAN, after a complete shutdown, works fine when I boot using Ubuntu but not macOS.

Any ideas on how to fix this?

Following changes have occurred for upgrading to Monterey -
1. Upgrade OpenCore from 0.7.7 to 0.8.3
2. Patch the firmware of the integrate Intel i225 using the i225-v mod zip file
3. In place upgrade from Big Sur to Monterey

I have tried waking up using the Aquantia card too but its a no go. I tried enabling Wake-on-LAN in UEFi after enabling CSM but macOS won't start after enabling CSM. Wake-on-LAN option does not exist in UEFI if I disable CSM.

Ethtool in Ubuntu reports Wake-on-LAN capabilities as "g" which means it should respond to magic packets and the setup works correctly if Ubuntu is the OS shutting down the system.

What next to try?

 

[hevega]

Here's something to try:

Gigabyte Z690 Aero G + i5-12600K + AMD RX 6800 XT

Is that correct for a 5700XT? That is correct. Note that the title bar says "0.7.7 Release Configuration" so as long as you're running OpenCore 0.7.7 then OpenCore Configurator will save the config.plist in correct format.

www.tonymacx86.com

No, nada

 

[CaseySJ]

No, nada

The missing wallpaper after GPU switch is a strange issue. I recommend doing a CMOS Reset after switching GPU. This requires us to re-configure BIOS.

 

[jonpm]

Hi all, my build has suddenly started having really glitchy graphics. I've not changed anything recently, it's started out of the blue today. RX580 and Monterey 12.5.1. Moving the mouse, moving windows etc all slow and glitchy. It's been stable for so long, I don't know where to start looking

 

[CaseySJ]

Hi all, my build has suddenly started having really glitchy graphics. I've not changed anything recently, it's started out of the blue today. RX580 and Monterey 12.5.1. Moving the mouse, moving windows etc all slow and glitchy. It's been stable for so long, I don't know where to start looking

Some comments:

• Are any Device Properties being injected through OpenCore (DeviceProperties --> Add)?
• Is RadeonBoost.kext being used?
• Have you tried CMOS Reset (which then requires re-configuring BIOS parameters)?

 

[bruttonero]

I'm running the latest Ventura beta and OC 0.8.4
I get them often (5-6) times a day, and they seem to be in mdshared.
Anyone has a similar experience?

 

[zedoc]

Hi, just updated to OC 0.8.4 with HackinDROM and had this message from vérification:

NOTE: This version of ocvalidate is only compatible with OpenCore version 0.8.4!


HfsPlus.efi at UEFI->Drivers[0] must have LoadEarly set to FALSE!
OpenCanopy.efi at UEFI->Drivers[2] must have LoadEarly set to FALSE!
AudioDxe.efi at UEFI->Drivers[3] must have LoadEarly set to FALSE!
CrScreenshotDxe.efi at UEFI->Drivers[4] must have LoadEarly set to FALSE!
ToggleSipEntry.efi at UEFI->Drivers[8] must have LoadEarly set to FALSE!
ResetNvramEntry.efi at UEFI->Drivers[9] must have LoadEarly set to FALSE!
OpenRuntime.efi at UEFI->Drivers[1] should have its LoadEarly set to FALSE unless OpenVariableRuntimeDxe.efi is in use!
CheckUefi returns 7 errors!

Completed validating /var/folders/vd/kz7b1bn17s93qhn6ctgd4vq80000gn/T/HackinDROM/standalone/EFI/OC/config.plist in 1 ms. Found 7 issues requiring attention.

so i've just unticked the LoadEarly in Drivers section (?):

I've also tried the IntelBluetooth-v2.2.0 following this guide:
https://openintelwireless.github.io/IntelBluetoothFirmware/FAQ.html#what-does-this-kext-do

adding the IntelBTPatcher.kext like this:

Updated to MacOs 12.6 and so far so good everything seems OK for now

 

[jonpm]

Some comments:

• Are any Device Properties being injected through OpenCore (DeviceProperties --> Add)?
• Is RadeonBoost.kext being used?
• Have you tried CMOS Reset (which then requires re-configuring BIOS parameters)?

Thanks Casey, I will check all of this later today and report back.

 

[jonpm]

Hi all, my build has suddenly started having really glitchy graphics. I've not changed anything recently, it's started out of the blue today. RX580 and Monterey 12.5.1. Moving the mouse, moving windows etc all slow and glitchy. It's been stable for so long, I don't know where to start looking

I found the problem. For some unexplained reason the display was set to 30Hz. No idea what could have done this. It was a good excuse to update OC and all kexts

 

[sbushman18]

Yay. RX 6800 on the way to replace my RX570 and hopefully drive my 4K monitor at high refresh rates. Please remind me what I need to change to get the machine to boot with the new card. If I remember, at least on previos OC versions, there was a switched that needed ticked. I am on 0.8.3 and the latest iteration of Monterey.