Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

[yurid]

The screenshot you showed is actually from Postflight and the first option is to run a script. EFIClone is already selected as the post-flight script. If you click the little "x" next to "EFIClone.sh", you will get this:
View attachment 532509
Please have a look at Step 13 in Post 1 to see what might be different. The screenshots in that post are from CCC version 5.x.x, but they're easy enough to reinterpret for CCC version 6.x.x.

Thank you, CaseySJ.
I overlooked that tiny box. Reading this thread, I am wondering how do you have time to answer such dumb questions. I guess I am not alone who can't see what is just popping into the eyes.
Problem solved. Thank you again for your time.

 

[yurid]

** Reminder: Intel I-225V Ethernet port (red) does not work in Monterey for 99% of us **​

We can use a USB or Thunderbolt adapter instead.

Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

Big Sur 11.6 (running as Mac20,1) yes UHD630 with no other GPUs connected (I did connect the GTX 780 though when I only had 1 monitor connected if that matters) I'm using 1 HDMI and 1 DP port on the Vision G Dell U2412M (both) Never had a problem with dual monitor setups on my OLD hackintosh...

www.tonymacx86.com

Mine is working.

 

[CaseySJ]

Mine is working.

Hmm, the plot thickens. You are using iMac20,1 and @lewys has iMac20,2. @MacArthur tried iMac20,2 without success.

• Which version of BIOS are you running?
• Are your BIOS parameters configured the same as in Post 1?

 

[ffk]

Hmm, the plot thickens. You are using iMac20,1 and @lewys has iMac20,2. @MacArthur tried iMac20,2 without success.

• Which version of BIOS are you running?
• Are your BIOS parameters configured the same as in Post 1?

I'm just throwing this out there as I once had issues with a Sonnet Tempo adapter that would only work in high sierra if I update from sierra to high sierra. If i just installed high sierra straight away it wouldn't work...

Are people updating to Monterey or doing fresh installs of Monterey?
Just a thought. I'm still on Catalina...

 

[zedoc]

Hmm, the plot thickens. You are using iMac20,1 and @lewys has iMac20,2. @MacArthur tried iMac20,2 without success.

• Which version of BIOS are you running?
• Are your BIOS parameters configured the same as in Post 1?

Just plugged mine and it's working too...
iMac19,1 Big Sur to Monterey software update (BIOS F5 as Post 1)

 

[MacArthur]

Just plugged mine and it's working too...
iMac19,1 Big Sur to Monterey software update (BIOS F5 as Post 1)

Mine as original iMac 19.1 does not work (iMac 20.2 was not working too...)

 

[CaseySJ]

Mine as original iMac 19.1 does not work (iMac 20.2 was not working too...)

Did you also upgrade from Big Sur or perform a fresh Monterey install?

 

[MacArthur]

Fresh install
If it may help I can downgrate to BS and upgrade. Just let me know, I have some time today ;-)

 

[zedoc]

Did you also upgrade from Big Sur or perform a fresh Monterey install?

Upgraded from Big Sur via System Preferences

EDIT: Sorry, i'm not @MacArthur

 

[MacArthur]

Upgraded from Big Sur via System Preferences

Very tempting, @CaseySJ yours is a fresh install? If you confirm it is, I'll try to reinstall BS and then upgrade. I have CCC so it should not be too long...