- Joined
- Jun 22, 2019
- Messages
- 53
- Motherboard
- Gigabyte Z490 Vision D
- CPU
- i7-10700
- Graphics
- Rx 580
Hello @Aresexe,Hi, thank you all for putting together all this information
My build is:
Z490 Vision D
I9-10900k
GPU - SAPPHIRE NITRO+ Radeon RX 5700 XT Special Edition
Monitor (just in case it matters): Dell u3415w
My issue:
at boot install, when I select Install Catalina (first phase), after the apple logo loads half way screen goes black. It's an issue with the GPU. I figured this by removing the power from GPU and connecting the monitor to the MB hdmi and I was able to install and boot into Hackintosh. Once I install if I want to switch to GPU I have the same issue.
Is this GPU (Nitro+ special edition) supported in Hackintosh
Any advice?
Thank you
Just change the file in the EFI partition. If you already signed in to iCloud, then transfer the following items from the current config.plist into the new one (in OpenCore Configurator --> PlatformInfo --> DataHub):omg, I missed that ( I read CPU instead of GPU)
thank you for pointing this out
Do I need to reinstall the macOS, or should I just change that file in the EFI partition?
Thank you
Just change the file in the EFI partition. If you already signed in to iCloud, then transfer the following items from the current config.plist into the new one (in OpenCore Configurator --> PlatformInfo --> DataHub):
- System Serial Number
- SystemUUID
- MLB (board serial number)
- ROM
Sure, that will work.Thanks a lot
May I ask what is the best way to do that? Open both files and copy-paste the information?
Sure, that will work.