Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

[CaseySJ]

This cover what ya need ?

This looks normal.

So you can see both EFI disk icons in OpenCore boot picker, but only one macOS boot icon? The second (clone) macOS boot icon does not appear in the boot picker?

If so, please try cloning the disk again, but use the instructions here:

Asus Z690 ProArt Creator WiFi (Thunderbolt 4) + i7-12700K + AMD RX 6800 XT

CaseySJ's Intel Alder Lake i7-12700K: Asus Z690 ProArt Creator WiFi + Intel i7-12700K + AMD RX 6800 XT Please do not quote this guide in its entirety. Post a link instead. All P-cores, E-cores, and Hyper Threads are usable! This build guide starts with macOS 12 Monterey, but supports Big Sur...

www.tonymacx86.com

 

[supaMac]

You are a plethora of knowledge, a scholar and a gentleman! Bam! NVMe to NVMe copy took about 7 minutes with step 11 form the mentioned article, and I'm up and running with only the new WD Black drive installed!
I spent hours reading and searching before I asked...
I would have never found that info without you!

Thanks so much!

 

[Dotals]

hi all, will you recommend using iMac20,2 with the RX 6800 XT gpu and the i9 10900k and z490 Visiong G?

 

[bazzevo]

Have you tried the two usual remedies?

• Reset NVRAM
• CMOS Reset (which requires re-configuring BIOS parameters)

Casey, for CMOS Reset, is it wise to use a backup of my settings for my Z490, which I have backed up? What firmware would you recommend also? I have F6. Maybe updating to F20 might fix this?

Thank you.

 

[RandC]

I can post the OC 0.9.1 EFI folder with custom OpenCore.efi to fix the WiFi and Ethernet issue. Will do that in next day or so. Waiting for more test results to come in.

Casey,

I updated to OC 0.9.1 EFI. (I think I did it correctly but not entirely sure.) I applied your patch. My backup is macOS 13.2, and my main drive is OS 13.3. I'm booting my new EFI from a USB drive. What I see is that WiFi and Ethernet work fine at OS 13.2, but when I boot from my main drive neither WiFi or Ethernet work. I have not tried to repair the drive yet. Anyone else seen this? Have you tested 13.3? Attached my EFI folder. Thanks so much.
Rand

P.S. I booted from the OS 13.3 recovery drive. Can also report that there is no WiFi or Ethernet booting from Recovery and checked OS 13.3 with no errors.

P.P.S. I see you have a new OpenCore.efi to try for 13.3. I did not try that. Reverting back to 13.2 on my main drive as I didn't see that post (Oh well). Thanks

 

[CaseySJ]

** UPDATED **
Experimental OpenCore.efi with DisableIoMapperMapping Kernel Quirk

​

Please refer to this post for the latest version:

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

is this right? I re-booted after re-inserting the quirk and wireless is gone again Are you using the new OpenCore.efi? It needs to be copied into EFI/OC folder.

www.tonymacx86.com

 

[RandC]

Need some help. I upgraded my OC to 0.9.1, and I can boot Mac OS X 13.2 with both Ethernet and wireless working. But I've found out that I cannot log into the Apple Store any longer because my Ethernet connection is en2 not en0. See System Info and IORegistry attached. There must be something wrong with my EFI, also attached. Anyone know what I've done wrong? Thanks.

 

[CaseySJ]

Need some help. I upgraded my OC to 0.9.1, and I can boot Mac OS X 13.2 with both Ethernet and wireless working. But I've found out that I cannot log into the Apple Store any longer because my Ethernet connection is en2 not en0. See System Info and IORegistry attached. There must be something wrong with my EFI, also attached. Anyone know what I've done wrong? Thanks.

We should be able to resolve this problem as follows:

• Open Terminal
• Type:

cd /Library/Preferences/SystemConfiguration
sudo rm NetworkInterfaces.plist

• Reboot and check again

 

[RandC]

We should be able to resolve this problem as follows:

• Open Terminal
• Type:

cd /Library/Preferences/SystemConfiguration
sudo rm NetworkInterfaces.plist

• Reboot and check again

Thanks Casey. Worked like a charm. I really appreciate your help!

 

[CaseySJ]

The new kernel quirk has been merged into OpenCore. We should see it in 0.9.2 next month!

An early build is available from https://dortania.github.io as shown: