Contribute
Register

Gigabyte Z390 UD + i5-9400 HDMI Black Screen Problem (Catalina 10.15.5)

Status
Not open for further replies.
Joined
Jun 29, 2020
Messages
5
Motherboard
Gigabyte GA-Z390 UD
CPU
i5-9400
Graphics
UHD 630
Mobile Phone
  1. Android
Hi. Can not fix video on Gigabyte Z390 UD + i5-9400 (no external graphic). The motherboard have only one HDMI and I do not have external graphic card.

-------------------------------------------------------------------------------------------

Currently I can achieve only this results:
a) Unrecognized graphic device with 7MB memory and no acceleration.
b) Black screen after [IGPU] section on boot ( no signal message on monitor).
c) Screen stuck after [IGPU] section on boot.
d) Intel UHD Graphics 630 7Mb (no acceleration, hackintool detected connected monitor as external).

Next kexts are present: AppleALC, Lilu, VirtualSMC, WhateverGreen, USBInjectAll, RealtekRTL8111.
Sound and gigabit connection are working.

In UEFI possible values:
  • DVMT -Pre-Allocated: 32, 34, 96, 128, ...(many more)... 1024
  • DVMT Total Gfx Mem: 128, 256, MAX
  • Aperture Size: 128, 256, 512, 1024, 2048
  • (GFX IGPU) + (MEI IMEI) + (HECI IMEI) + (IntelGFX 0x3E9B0007 / 0x3E920000) + (InjectIntel) + (ig-platform-id 0xE9B0007 / 0x3E920000) + (iMac15.1 / macMini8.1) = Unrecognized 7MB.
  • (ig-platform-id 0xE9B0007 / 0x3E920000) + (iMac15.1 / macMini8.1) = delay after [IGPU] section and screen off.
  • (InjectIntel) + (ig-platform-id 0x3E9B0006) + (macBookPro15.1) = stuck after [IGPU] section.
  • (ig-platform-id 0x3E9B0000) + (macBookPro15.1) = delay after [IGPU] section and screen off.
  • (InjectIntel) + (ig-platform-id 0x3E9B0000) + (macBookPro15.1) = after [IGPU] section screen off.
  • PATCH (0x3E9B0000) + (3x connections -> HDMI) + (connectors) + (DeviceProperties) + (VRAM) + (EDID) + (Graphic Device) + (All) + (Use AllData Method) + (Use Intel HDMI) + (HDMI 2.0) + (Spoof Video 0x3E9B) + (macBookPro15.1)= after [IGPU] section screen off.
  • PATCH (0x3E9B0006) + (1x connections -> HDMI) + (connectors) + (DeviceProperties) + (VRAM) + (EDID) + (Graphic Device) + (All) + (Use AllData Method) + (Use Intel HDMI) + (HDMI 2.0) + (Spoof Video 0x3E9B) + (macBookPro15.1) = stuck after [IGPU] section.
  • PATCH from this post. + (iMac19.1) = Intel UHD Graphics 630 7Mb (no acceleration, hackintool detected connected monitor as external).
  • PATCH from this post. + (with and without memory fix and other) + (iMac19.1) = Intel UHD Graphics 630 7Mb (no acceleration, hackintool detected connected monitor as external).
-------------------------------------------------------------------------------------------

EFI and config that where used can be found in attachments.
XML:
<key>Properties</key>
        <dict>
            <key>PciRoot(0x0)/Pci(0x2,0x0)</key>
            <dict>
                <key>AAPL,ig-platform-id</key>
                <data>              
                PpsABw==
                </data>
                <key>device-id</key>
                <data>
                PpsAAA==
                </data>
                <key>enable-hdmi20</key>
                <data>
                AQAAAA==
                </data>
                <key>framebuffer-con0-busid</key>
                <data>
                BAAAAA==
                </data>
                <key>framebuffer-con0-enable</key>
                <data>
                AQAAAA==
                </data>
                <key>framebuffer-con0-index</key>
                <data>
                AwAAAA==
                </data>
                <key>framebuffer-con0-type</key>
                <data>
                AAgAAA==
                </data>
                <key>framebuffer-con1-busid</key>
                <data>
                AAAAAA==
                </data>
                <key>framebuffer-con1-enable</key>
                <data>
                AQAAAA==
                </data>
                <key>framebuffer-con1-index</key>
                <data>
                /////w==
                </data>
                <key>framebuffer-con1-type</key>
                <data>
                AQAAAA==
                </data>
                <key>framebuffer-con2-busid</key>
                <data>
                AAAAAA==
                </data>
                <key>framebuffer-con2-enable</key>
                <data>
                AQAAAA==
                </data>
                <key>framebuffer-con2-index</key>
                <data>
                /////w==
                </data>
                <key>framebuffer-con2-type</key>
                <data>
                AQAAAA==
                </data>
                <key>framebuffer-patch-enable</key>
                <data>
                AQAAAA==
                </data>
                <key>framebuffer-unifiedmem</key>
                <data>
                AAAAgA==
                </data>
            </dict>
        </dict>

-------------------------------------------------------------------------------------------

What should I do to fix this problem ?
 

Attachments

  • EFI.zip
    4.7 MB · Views: 73
  • config.plist
    8.3 KB · Views: 60
Last edited:
Have no success with this setup. Just bought RX570
 
Status
Not open for further replies.
Back
Top