Contribute
Register

Gigabyte Z390 M Gaming build with working NVRAM

Hi pastrychef,

It is very kind of you to share all this. I was having a difficult time with Catalina, all sorts of problems and not a lot of time to fix them. I just dropped in your EFI and everything just works! BIG Thank you :)
 
Clover EFI updated to r5134

OpenCore EFI updated to 0.6.9

All kexts updated to latest release versions in both.

Please test using a USB flash drive before deleting your existing EFI.

Do not use your old config.plist. Instead, copy/paste your Serial, Board Serial, UUID, and MAC address (OpenCore only) to the new config.plist included with the new EFIs.

Don't use Clover Configurator to edit Clover config.plists until it has been updated for Clover r5134.
 
Last edited:
Clover EFI updated to r5134

OpenCore EFI updated to 0.6.9

All kexts updated to latest release versions in both.

Please test using a USB flash drive before deleting your existing EFI.

Do not use your old config.plist. Instead, copy/paste your Serial, Board Serial, UUID, and MAC address (OpenCore only) to the new config.plist included with the new EFIs.
Hi, just updated to 5134, being brave (or stupid) and without testing with a USB drive.

I get this error messages at the boot screen, macOS 11.3 is booting fine after that and everything seams to work fine.

How to get rid of this messages?

Thx for all your effort!
 

Attachments

  • Boot Clover 5134 Error.jpg
    Boot Clover 5134 Error.jpg
    1.3 MB · Views: 53
Hi, just updated to 5134, being brave (or stupid) and without testing with a USB drive.

I get this error messages at the boot screen, macOS 11.3 is booting fine after that and everything seams to work fine.

How to get rid of this messages?

Thx for all your effort!

Please see the post above yours.
 
Please see the post above yours.
Hi, not sure that I know what exactly you are referring at.

Copied all the serial stuff from my old config.plist.

What I saw in the 5134 config.plist is that the bios version is older (IMP11.88Z.F000.B00.1907261958 from 2019) than in the 5128 (IMP11.88Z.F000.B00.2101062038 from 2021)

Switch back to 5128, just to be sure.
 
Hi, not sure that I know what exactly you are referring at.

Copied all the serial stuff from my old config.plist.

What I saw in the 5134 config.plist is that the bios version is older (IMP11.88Z.F000.B00.1907261958 from 2019) than in the 5128 (IMP11.88Z.F000.B00.2101062038 from 2021)

Switch back to 5128, just to be sure.

Don't use Clover Configurator to edit your config.plist until it has been updated for Clover r5134.
 
ok, then I'll wait, I don't know how to change without the Clover Configurator ;-)

Thx
 
About half hour...

Screen Shot 2021-05-03 at 3.39.48 PM.png

Screen Shot 2021-05-03 at 4.10.00 PM.png
 
Has anything changed from 11.3 to 11.3.1?
I'm afraid to upgrade to 11.3, because I lost all the USB mapping and the system is crashing as soon as I enter with my user.
XhciLimit is disabled and I removed the USBInjectall, and recreated the USB MAP, but it keeps crashing.
 
Back
Top