Contribute
Register

Gigabyte Z390 M Gaming build with working NVRAM

Hey guys, my system after going sleep sometimes it doesn't wake up.
I've attached the image of the error and also run this command
pmset -g log | grep -i failure
and the result was the other file attached.

Any idea?
 

Attachments

  • LWScreenShot 2022-02-20 at 4.21.47 PM.png
    LWScreenShot 2022-02-20 at 4.21.47 PM.png
    240.6 KB · Views: 38
  • Screen Shot 2022-02-20 at 4.35.59 PM.png
    Screen Shot 2022-02-20 at 4.35.59 PM.png
    15.6 KB · Views: 30
Hey guys, my system after going sleep sometimes it doesn't wake up.
I've attached the image of the error and also run this command

and the result was the other file attached.

Any idea?

Yup. As atl285 stated, it's IntelMausi.

Personally, I have never used IntelMausi. I use IntelMausiEthernet, the original from which IntelMausi was forked from.
 
Personally, I have never used IntelMausi. I use IntelMausiEthernet, the original from which IntelMausi was forked from.
Hey thanks both!
How can I switch to IntelMausiEthernet?
 
Hey thanks both!
How can I switch to IntelMausiEthernet?

Replace the kext in /EFI/OC/Kexts/.
Replace it in config.plist > Kernel > Add.
Done.
 
Replace the kext in /EFI/OC/Kexts/.
Replace it in config.plist > Kernel > Add.
Done.
Ahh ok I thought it should be replaced in other part because I have it like that :confused:
 

Attachments

  • Screen Shot 2022-02-21 at 4.07.20 PM.png
    Screen Shot 2022-02-21 at 4.07.20 PM.png
    151.3 KB · Views: 24
@Colombiano, maybe IntelMausi.kext is additional loaded. Did you used a Clover installation before using OpenCore? Please check also if there the kext could be located in /Library/Extensions or /System/Library/Extensions. Rebuild the KextCache (In Hackintool on Utilities page) and reboot.
 
Back
Top