Contribute
Register

Gigabyte Z390 M Gaming build with working NVRAM

pastrychef said:
Use the latest. You can choose either Clover or OpenCore. They both work.
Click to expand...
I am doing a timemachine with mojave, I am restoring my version,



once mojave is installed, I only have to update my EFI via cloverconfigurator



and do the installation from the APP?



and it's ok ?
 
Gigabyte Z390 M Gaming build with working NVRAM
Z390 M GAMING |  i7 9700K |  RX 570 8GB
DiABLONY said:
I am doing a timemachine with mojave, I am restoring my version,



once mojave is installed, I only have to update my EFI via cloverconfigurator



and do the installation from the APP?



and it's ok ?
Click to expand...

No.

Download the latest Clover EFI from post #1.
Copy/paste your SMBIOS info from your current config.plist to the new config.plist included with the EFI you just downloaded.
Replace your existing EFI folder on the EFI partition of your main system drive with the new one.
Reboot.
Update macOS.
 
pastrychef said:
No.

Download the latest Clover EFI from post #1.
Copy/paste your SMBIOS info from your current config.plist to the new config.plist included with the EFI you just downloaded.
Replace your existing EFI folder on the EFI partition of your main system drive with the new one.
Reboot.
Update macOS.
Click to expand...
i'm lost :(
 
Gigabyte Z390 M Gaming build with working NVRAM
Z390 M GAMING |  i7 9700K |  RX 570 8GB
DiABLONY said:
i'm lost :(
Click to expand...

  1. Download the latest Clover EFI from post #1.
  2. Mount the EFI partition of your main system drive.
  3. Open the config.plist with Clover Configurator.
  4. Unzip the EFI that you just dowloaded.
  5. Copy/paste all the info from your current config.plist > SMBIOS to the config.plist of the new EFI folder.
  6. Replace the EFI folder on the EFI partition of your main system drive with the new one you just downloaded.
  7. Reboot.
  8. Update macOS.
 
pastrychef said:
  1. Download the latest Clover EFI from post #1.
  2. Mount the EFI partition of your main system drive.
  3. Open the config.plist with Clover Configurator.
  4. Unzip the EFI that you just dowloaded.
  5. Copy/paste all the info from your current config.plist > SMBIOS to the config.plist of the new EFI folder.
  6. Replace the EFI folder on the EFI partition of your main system drive with the new one you just downloaded.
  7. Reboot.
  8. Update macOS.
Click to expand...
update macos with software update or with usb ?
 
Gigabyte Z390 M Gaming build with working NVRAM
Z390 M GAMING |  i7 9700K |  RX 570 8GB
DiABLONY said:
it's good, but...

the update is ok, but my mouse is stuck
suddenly I can use the keyboard but no longer the mouse

a tip? thanks again for the help
Click to expand...

What kind of mouse is it? Bluetooth? USB? Did you try using a different USB port?
 
DiABLONY said:
I managed to get the mouse to work by changing the port, but my wifi no longer works
and the other usb ports too

and graphic card ??? 8GB
Click to expand...

What kind of Wi-Fi card are you using?

You need to map your USB. Please see the following guide.
www.tonymacx86.com

The New Beginner's Guide to USB Port Configuration

Important Update: June 2023 From Big Sur 11.3 on the built-in OpenCore XhciPortLimit quirk no-longer worked as described. This became a known "bug", though in reality it was Apple changing their internal code, making a simple "peek and poke" to keep it operating, a difficult task. However, with...
www.tonymacx86.com www.tonymacx86.com

The graphics card thing is cosmetic. If you want to fix it, please see the bottom of post #3 and look for the "How to populate System Information > PCI". Follow the instructions to change the "???" to anything you like.
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top