<< Solved >> Gigabyte Z390 Aorus Pro Wifi + Gigabyte GC-Titan Ridge Help

[zipb]

@CaseySJ
I don't see a nvm67? What's the URL?

 

[CaseySJ]

@CaseySJ
I don't see a nvm67? What's the URL?

It’s the last file at the bottom of the Repository.

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

Yes, have run Kext Utility didn't fix Didn't get to the bootable backup section yet. Yes, can boot into recovery. Did you also update Clover when you updated Lilu and WhateverGreen? Do you still have the USB install disk? (This was used to install macOS.)

www.tonymacx86.com

 

[zipb]

OK, for the Z390-Designare. Right.
Let's see if TB survives sleep without replugging.

 

[zipb]

@CaseySJ

Now it doesn't sleep properly(lights stay on), and it still loses connection with the TB-ethernet contraption when trying to sleep. Any suggestions?

 

[prashantloveguru143]

Please do this:

• Uncheck SSDT-Z390-DESIGNARE-TB3HP-V4.aml
  • We cannot use this because it's for RP05 instead of RP21
• Add this to config.plist --> ACPI section:
  • SSDT-TB3HP-RP21.aml
• Download attached file and copy it to EFI/OC/ACPI folder
• Reboot and let's see your IOReg file again

Hello @CaseySJ ,
i did above changes , and now my system report shows thunderbolt card under PCI section.
but my sandisk extreme external ssd (type-c) to card is not detected , i also tried to kept attached while booting, still not detected. (Note: Meanwhile i updated my bios From F8 to F10 latast one ) , Unable to roll back bios.
Thunderbolt card tested in windows and its working..
plz Help.

 

[CaseySJ]

Hello @CaseySJ ,
i did above changes , and now my system report shows thunderbolt card under PCI section.
but my sandisk extreme external ssd (type-c) to card is not detected , i also tried to kept attached while booting, still not detected. (Note: Meanwhile i updated my bios From F8 to F10 latast one ) , Unable to roll back bios.
Thunderbolt card tested in windows and its working..
plz Help.

Some questions:

• Does your motherboard have another USB-C port? If so, does the Sandisk work there? We are having trouble connecting USB-C devices on various motherboards.
• Do you have a Thunderbolt device? Does it connect and work properly?

 

[prashantloveguru143]

Some questions:

• Does your motherboard have another USB-C port? If so, does the Sandisk work there? We are having trouble connecting USB-C devices on various motherboards.
• Do you have a Thunderbolt device? Does it connect and work properly?

Hello @CaseySJ ,
my motherboard doent have another type -c port.
as i stated early my sandisk ssd was working

<< Solved >> - Gigabyte Z390 Aorus Pro Wifi + Gigabyte GC-Titan Ridge Help

Good job!! Are these USB Type-C ports or blue/red/yellow Type-A ports? Just to say that I missed out thanking you specifically @CaseySJ - without your help I'd probably have thrown in the towel and just bought an iMac! So THANK YOU! To your question - There's a couple of USB C ports (one...

www.tonymacx86.com

i observed that in hackintool USB section doesnt show SSP device which was showing early.

Current situation screenshots i attached. system report shows thunderbolt card under PCI section but not showing in hackintool usb section. as i booted system with USBinjectall kext and HXCIport limit true, usb ports not working. these screen shots i taken by connecting system remotely in lan. USB portmapping i can do later.
plz check.