Contribute
Register

Gigabyte X299X - Catalina Support

Joined
Jan 3, 2021
Messages
24
Motherboard
Gigabyte X299X Designare 10G
CPU
i9-10940X
Graphics
Radeon VII
Mac
  1. MacBook Pro
  2. Mac Pro
Mobile Phone
  1. iOS
@oreoapple I'm coming up against the same issue. Recently flashed the TB Firmware. All works well but the Speed says Up to 20Gb/s x2 instead of 40.

I have 2x Radeon VIIs in the case and another Radeon VII in one eGPU and a 5700XT in the other. The Radeon VII in the eGPU will show up as "Display" (with no kexts loaded) if I have both eGPUs turned on from cold boot.

This was my process in Catalina prior to flashing and both would show up.

In Big Sur (with the flashed FW) I can only use 1 eGPU as the PCI Lane width for the Radeon VII is reading as 16x instead of 4x and I think that causes a kernel panic if I hot plug both eGPUs.

I'm happy hot plug works btw, so it has been a useful exercise doing this...

I feel so close to the solution but it'll take a bit more time and research to get right – and it could even be something in Big Sur / OpenCore. I wasn't able to get both eGPUs working in Catalina until 10.15.6/7 as I recall.

Hoping we can both solve this!
 
Joined
Jan 19, 2019
Messages
231
Motherboard
Z390 M Gaming
CPU
i9-9900
Graphics
RX 580
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
I mainly use blackmagic recorder and a TB3 NAS: the recorder only works if I plug in before I boot. NAS works great.
I also tried thunderbolt bridge with my MBP, works great too.
I feel like we are 99.99% there.

@oreoapple I'm coming up against the same issue. Recently flashed the TB Firmware. All works well but the Speed says Up to 20Gb/s x2 instead of 40.

I have 2x Radeon VIIs in the case and another Radeon VII in one eGPU and a 5700XT in the other. The Radeon VII in the eGPU will show up as "Display" (with no kexts loaded) if I have both eGPUs turned on from cold boot.

This was my process in Catalina prior to flashing and both would show up.

In Big Sur (with the flashed FW) I can only use 1 eGPU as the PCI Lane width for the Radeon VII is reading as 16x instead of 4x and I think that causes a kernel panic if I hot plug both eGPUs.

I'm happy hot plug works btw, so it has been a useful exercise doing this...

I feel so close to the solution but it'll take a bit more time and research to get right – and it could even be something in Big Sur / OpenCore. I wasn't able to get both eGPUs working in Catalina until 10.15.6/7 as I recall.

Hoping we can both solve this!
 
Joined
Jan 3, 2021
Messages
24
Motherboard
Gigabyte X299X Designare 10G
CPU
i9-10940X
Graphics
Radeon VII
Mac
  1. MacBook Pro
  2. Mac Pro
Mobile Phone
  1. iOS
@oreoapple and I have now solved our TB3 Speed related issues thanks to the help of @CaseySJ and this post by @Elias64Fr. I believe there must have been a typo in the X299X Designare 10G TB3 SSDT that HackinDROM generates. This now appears to be fixed.

So as suggested, it is solved "by changing "LinkDetails" to "linkDetails" on _DSM NHI0 device"—Elias64Fr
Notice the lowercase 'l'... that was it!

So instead of Speed 20Gb/s x2 it now reads 40GB/s x1. It was probably only a cosmetic fix, but hey, I'm very happy to be able to put this one to bed now.
 
Joined
Jan 19, 2019
Messages
231
Motherboard
Z390 M Gaming
CPU
i9-9900
Graphics
RX 580
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
@imcalledandy
So glad the issue was resolved. One thing I want to mention is that this is more than a cosmetic fix: my blackmagic mini recorder now has full hot-plug working with 40x1; before I need to plug it in it before booting the system. So technically speaking, something is still going on than simply 20x2 to 40x1, but hey we are good now :D
My guess is that there might be some kinda protocol negotiation going on related to the speed, so for certain device if it's not 40x1, it may not be happy if the device is hot-plug.


@oreoapple and I have now solved our TB3 Speed related issues thanks to the help of @CaseySJ and this post by @Elias64Fr. I believe there must have been a typo in the X299X Designare 10G TB3 SSDT that HackinDROM generates. This now appears to be fixed.

So as suggested, it is solved "by changing "LinkDetails" to "linkDetails" on _DSM NHI0 device"—Elias64Fr
Notice the lowercase 'l'... that was it!

So instead of Speed 20Gb/s x2 it now reads 40GB/s x1. It was probably only a cosmetic fix, but hey, I'm very happy to be able to put this one to bed now.
 

CaseySJ

Moderator
Joined
Nov 11, 2018
Messages
13,503
Motherboard
Gigabyte Z490 Vision D
CPU
i5-10400
Graphics
RX 580
Mac
  1. MacBook Air
  2. MacBook Pro
  3. Mac Pro
Classic Mac
  1. Quadra
Mobile Phone
  1. iOS
@oreoapple and I have now solved our TB3 Speed related issues thanks to the help of @CaseySJ and this post by @Elias64Fr. I believe there must have been a typo in the X299X Designare 10G TB3 SSDT that HackinDROM generates. This now appears to be fixed.

So as suggested, it is solved "by changing "LinkDetails" to "linkDetails" on _DSM NHI0 device"—Elias64Fr
Notice the lowercase 'l'... that was it!

So instead of Speed 20Gb/s x2 it now reads 40GB/s x1. It was probably only a cosmetic fix, but hey, I'm very happy to be able to put this one to bed now.
We actually found this issue several months ago and discussed it in the Z390 Designare thread. In the intervening time it completely skipped my mind. Glad that Elias caught it!
 
Joined
Aug 17, 2017
Messages
266
Motherboard
Gigabyte X299 UD4 PRO
CPU
I9-10980XE
Graphics
RX 5700XT
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
Hi, are there any solutions to get the integrated Wifi and BT card on the X299X Designare 10G to work on the latest versions of Catalina?
I've tried everything but nothing for now, I guess I'm not the only one.
I also tried to install the BCM943602CS pci card, which on my previous build worked natively, but only Wifi works.
Some idea?
 
Joined
Aug 6, 2013
Messages
35
Motherboard
Gigabyte X299X Designare 10G
CPU
i9-10900X
Graphics
RX 580
Mac
  1. MacBook Pro
Mobile Phone
  1. Android
This card works for me without any problems. Fully compatible replacement.
No need to install any drivers, supporting kexts or SSDTs.
It's a bit dated compared to Intel, but unlike Intel card the motherboard comes with, it just works.
Both BT and WiFi work.

WiFi might not be super fast as reported by Network Utility App, but I don't really care about WiFi, I have 10GbE switch :)

https://www.amazon.com/gp/product/B083YXS7VF/?tag=tonymacx86com-20

Hi, are there any solutions to get the integrated Wifi and BT card on the X299X Designare 10G to work on the latest versions of Catalina?
I've tried everything but nothing for now, I guess I'm not the only one.
I also tried to install the BCM943602CS pci card, which on my previous build worked natively, but only Wifi works.
Some idea?
 
Joined
Feb 21, 2021
Messages
4
Motherboard
Asus WS C621-64L SAGE/10G
CPU
W 3275M
Graphics
Radeon Pro WX 4100
Mac
  1. MacBook Pro
  2. Mac mini
  3. Mac Pro
Mobile Phone
  1. iOS
@dolgarrenan

How the SmallTree Kext was modified and by who?
I compared an Original Kext and yours and besides from the Version they are identical.

Edit: How ever... I have worked out a way to bypass the lock on this board and hardcoded the whole thing via Linux.

Bildschirmfoto 2021-02-27 um 02.43.54.png


Bildschirmfoto 2021-02-27 um 02.47.09.png


123.png
 
Last edited:
Joined
Aug 17, 2017
Messages
266
Motherboard
Gigabyte X299 UD4 PRO
CPU
I9-10980XE
Graphics
RX 5700XT
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
Thanks @teosoft for the tips, but I preferred to use my previous BCM card which is natively supported.


Now, the fun part :yawn:
After wasting a lot of time I was able to find a stable dual boot Clover configuration for my new X299X Designare 10G.
For now I prefer Clover for its ease use, configuration, and updating.
Now I can choose to boot MacOs or Windows from the Clover boot screen without the annoying boot bug.
Otherwise everything seems to work, including the Thunderbolt hotplug, although I have to unplug and re-plug devices after booting.
I have always tried to use only the essential patches or at most a little more, to have a bootloader as clean as possible, adopting the method of less is more.
Until Gigabyte fixes the X299 bios bug, this is the most stable version I was able to get.

However, I have a couple of problems that I can't solve, some were also present on my previous Gigabyte X299 and had started to manifest themselves since autumn 2020, but I didn't understand what they were caused by.

- The main problem is that if I have an external hard drive connected via USB I cannot boot. The system shuts down immediately after selecting the OS.

- The second, less serious, is that the time is always wrong after a cold boot. It corrects itself with internet connection, but this causes problems with Dark Mode that is set to auto. This also happens on Windows.


Problems present from the previous X299 configuration and which I continue to have are:

- Random Kernel panic, I don't know what the real cause is, maybe a conflict between SSDT, Kext or a patch that I missed?
This is the main report after reboot:
Code:
panic(cpu 2 caller 0xffffff8000445a1a): Kernel trap at 0xffffff800043e193, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x0000000111366020, CR3: 0x0000000202238002, CR4: 0x00000000003626e0
RAX: 0xffffff8092bd1738, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff873e6bbc98, RBP: 0xffffff873e6bbd00, RSI: 0x4000000000000000, RDI: 0x4000000000000000
R8:  0xffffff873e6bbd44, R9:  0xffffff8093178a30, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0xffffff873e6bbd44, R13: 0x0000000000000000, R14: 0xffffff8092c81800, R15: 0x4000000000000000
RFL: 0x0000000000010206, RIP: 0xffffff800043e193, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x0000000111366020, Error code: 0x0000000000000000, Fault CPU: 0x2, PL: 0, VF: 0

mp = 0xffffff808d929e60, phys = 0x1b7fcbe60, prev (0xb: 0xff000000-0x100000000)
vp = 0xffffff8092c81800, phys = 0x101e758800, prev (0xb: 0xff000000-0x100000000)
0xffffff808d928000: 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
0xffffff808d929000: 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
0xffffff808d92a000: IUMAAAAAAC8sA1N5c3QwA2VtL1Y0A29sdW04A2VzL0Q8A2F0YQBAAy9kZXZEAy9kaXNIA2sxczFMAwEAAABEBwCQz41YB4D///9cBwAAAARgBwAAAARkBwABAABoBwABAABsBwAQAABwBwAQAAB0BwMAAAB4BwAQAAB8BwABAACABwgAAACEBwIAAACIBwAAgACMB7sNAACgB+8DAQCoB7sNAACwBz0EAQC4BwAAACHIB//////kBwCe0Y3oB4D////sBwMAAAD4BwEAAAAMCJv///8oCJv///8sCABR1o0wCID///80CACS0Y1ACID///9ECEWkvhlICAoAAABMCAIAAABQCADAhZVwCID///90CAAAAAJ4CP////98CMC8ko2ACID///+ECPh24ACICID///+MCMFcAACQCP////+kCGDiYoGoCH////+sCGDOu42wCID///+0CABsbJ/ACID////ECCCX0Y3ICID////MCNCoko3YCID////cCOCoko3oCID////sCAHQgATwCIAA3YD0CAAQAAAECQAAEAAICaxFjQ4QCa1HYw4YCZ6KOgcgCf/9KQAoCeDiEkYwCQIAAAA0CeFtC0Y4CQIAAAA8CQcAAAFACRkAAABECQHQgARMCWFwZnNUCS8AAABkCS9kZXZkDS9kaXNoDWsxczVsDQAA
Backtrace (CPU 2), Frame : Return Address
0xffffff8000152220 : 0xffffff800031963d mach_kernel : _handle_debugger_trap + 0x49d
0xffffff8000152270 : 0xffffff8000453ae5 mach_kernel : _kdp_i386_trap + 0x155
0xffffff80001522b0 : 0xffffff800044566e mach_kernel : _kernel_trap + 0x4ee
0xffffff8000152300 : 0xffffff80002bfa40 mach_kernel : _return_from_trap + 0xe0
0xffffff8000152320 : 0xffffff8000318d07 mach_kernel : _DebuggerTrapWithState + 0x17
0xffffff8000152420 : 0xffffff80003190f7 mach_kernel : _panic_trap_to_debugger + 0x227
0xffffff8000152470 : 0xffffff8000ac01cc mach_kernel : _panic + 0x54
0xffffff80001524e0 : 0xffffff8000445a1a mach_kernel : _sync_iss_to_iks + 0x2aa
0xffffff8000152660 : 0xffffff8000445718 mach_kernel : _kernel_trap + 0x598
0xffffff80001526b0 : 0xffffff80002bfa40 mach_kernel : _return_from_trap + 0xe0
0xffffff80001526d0 : 0xffffff800043e193 mach_kernel : _IOLockLock + 0x3
0xffffff873e6bbd00 : 0xffffff7f8153e988 com.apple.filesystems.apfs : _apfs_fsync_internal + 0xd0
0xffffff873e6bbd70 : 0xffffff7f8156e83b com.apple.filesystems.apfs : _apfs_sync_callback + 0x52
0xffffff873e6bbda0 : 0xffffff8000572b37 mach_kernel : _vnode_iterate + 0x287
0xffffff873e6bbe50 : 0xffffff7f8156abe9 com.apple.filesystems.apfs : _apfs_vfsop_sync + 0x85
0xffffff873e6bbea0 : 0xffffff800058473a mach_kernel : _sync + 0x10a
0xffffff873e6bbec0 : 0xffffff80005727bc mach_kernel : _vfs_iterate + 0x1fc
0xffffff873e6bbf30 : 0xffffff8000584647 mach_kernel : _sync + 0x17
0xffffff873e6bbf40 : 0xffffff8000983347 mach_kernel : _unix_syscall64 + 0x287
0xffffff873e6bbfa0 : 0xffffff80002c0206 mach_kernel : _hndl_unix_scall64 + 0x16
      Kernel Extensions in backtrace:
         com.apple.filesystems.apfs(1412.141.1)[062E3CEF-E038-31DA-BA10-D4AF760423DF]@0xffffff7f81509000->0xffffff7f81644fff
            dependency: com.apple.kec.corecrypto(1.0)[C463F990-54DE-3E65-B955-0E55C4A96D8D]@0xffffff7f80c9f000
            dependency: com.apple.driver.AppleEffaceableStorage(1.0)[20FF121D-4139-3B2F-83C7-6962BAA478AD]@0xffffff7f814b5000
            dependency: com.apple.iokit.IOStorageFamily(2.1)[95CC5A58-BF77-3690-9EEE-720B18B7C829]@0xffffff7f80c65000

BSD process name corresponding to current thread: launchd
Boot args: npci=0x2000 darkwake=0 keepsyms=1 agdpmod=pikera

Mac OS version:
19H524

Kernel version:
Darwin Kernel Version 19.6.0: Tue Jan 12 22:13:05 PST 2021; root:xnu-6153.141.16~1/RELEASE_X86_64
Kernel UUID: 64F23D6D-4C30-3FC4-B7C2-9EE0BBA0D29A
__HIB  text base: 0xffffff8000100000
System model name: MacPro7,1 (Mac-27AD2F918AE68F61)
System shutdown begun: NO
Panic diags file available: YES (0x0)

System uptime in nanoseconds: 3515069942447
last loaded kext at 37471524661: >!A!BMultitouch    97 (addr 0xffffff7f8227d000, size 57344)
last unloaded kext at 1013005148875: >!ASMCRTC    1.0 (addr 0xffffff7f819dc000, size 28672)
loaded kexts:
com.uaudio.driver.UAFWAudio    4.3.1 47542
com.uaudio.driver.UAD2System    9.13.0
com.intel.driver.EnergyDriver    3.7.0
ru.joedm.SMCSuperIO    1.2.0
hu.interferenc.TSCAdjustReset    1.1
as.vit9696.SMCProcessor    1.2.0
as.vit9696.VirtualSMC    1.2.0
org.acidanthera.NVMeFix    1.0.5
meow.IOIIIO.MacProMemoryNotificationDisabler    1.0.0
as.vit9696.!AALC    1.5.7
as.vit9696.WhateverGreen    1.4.7
as.vit9696.Lilu    1.5.1
>!A!BMultitouch    97
>!AUpstreamUserClient    3.6.8
>!AMCCSControl    1.14
@kext.AMDRadeonX6000    3.1.0
@kext.AMDRadeonServiceManager    3.1.0
>!AGraphicsDevicePolicy    5.2.7
@AGDCPluginDisplayMetrics    5.2.7
@fileutil    20.036.15
@filesystems.autofs    3.0
@filesystems.ntfs    3.14.3
>!AHV    1
|IOUserEthernet    1.0.1
|IO!BSerialManager    7.0.6f8
>pmtelemetry    1
@Dont_Steal_Mac_OS_X    7.0.0
>AGPM    111.4.4
>X86PlatformShim    1.0.0
>!APlatformEnabler    2.7.0d0
>AudioAUUC    1.70
>!AHDA    283.15
>!A!II210Ethernet    2.3.1
|Broadcom!B20703USBTransport    7.0.6f8
>!A!IPCHPMC    2.0.1
>!AGFXHDA    100.1.429
>AirPort.BrcmNIC    1400.1.1
>!ASMCLMU    212
>!A!ISlowAdaptiveClocking    4.0.0
>!A!IMCEReporter    115
@private.KextAudit    1.0
@filesystems.apfs    1412.141.1
>!AVirtIO    1.0
@filesystems.hfs.kext    522.100.5
@!AFSCompression.!AFSCompressionTypeDataless    1.0.0d1
@BootCache    40
@!AFSCompression.!AFSCompressionTypeZlib    1.0.0
>!AAHCIPort    341.140.1
>!AHPET    1.8
>!ARTC    2.0
>!AACPIButtons    6.1
>!ASMBIOS    2.1
>!AAPIC    1.7
$!AImage4    1
@nke.applicationfirewall    303
$TMSafetyNet    8
@!ASystemPolicy    2.0.0
|EndpointSecurity    1
>IO!BHIDDriver    7.0.6f8
>!AMultitouchDriver    3440.1
>!AInputDeviceSupport    3440.8
@kext.AMDRadeonX6000HWLibs    1.0
|IOAccelerator!F2    438.7.4
@kext.AMDRadeonX6000HWServices    3.1.0
>!AGraphicsControl    5.2.7
@kext.triggers    1.0
|IOFireWire!F    4.7.5
|IOAVB!F    850.1
@plugin.IOgPTPPlugin    840.3
@!AGPUWrangler    5.2.7
>DspFuncLib    283.15
@kext.OSvKernDSPLib    529
>!ASMBus!C    1.0.18d1
|IOSMBus!F    1.1
@kext.AMDRadeonX6000Framebuffer    3.1.0
>!AHIDKeyboard    209
|IOEthernetAVB!C    1.1.0
|Broadcom!BHost!CUSBTransport    7.0.6f8
|IO!BHost!CUSBTransport    7.0.6f8
|IO!BHost!CTransport    7.0.6f8
|IO!B!F    7.0.6f8
|IO!BPacketLogger    7.0.6f8
>!UAudio    323.4
>!AHDA!C    283.15
|IOHDA!F    283.15
|IONDRVSupport    576.1
>!ASMBusPCI    1.0.14d1
@kext.AMDSupport    3.1.0
@!AGraphicsDeviceControl    5.2.7
|IO80211!F    1200.12.2b1
>mDNSOffloadUserClient    1.0.1b8
>corecapture    1.0.4
|IOSkywalk!F    1
|IOGraphics!F    576.1
|IOSlowAdaptiveClocking!F    1.0.0
>X86PlatformPlugin    1.0.0
>IOPlatformPlugin!F    6.0.0d8
|IOAHCIBlock!S    316.100.5
>usb.!UHub    1.2
>usb.networking    5.0.0
>usb.!UHostCompositeDevice    1.2
>!UMergeNub    900.4.2
>!AThu

Rarely this:
Code:
panic(cpu 2 caller 0xffffff80004459fa): Kernel trap at 0xffffff80003e87d9, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff8380000020, CR3: 0x0000000f204db0ef, CR4: 0x00000000003626e0
RAX: 0xffffff800e600000, RBX: 0xffffff8380000000, RCX: 0x0000000000001041, RDX: 0x0000000059682f00
RSP: 0xffffff874343b480, RBP: 0xffffff874343b4b0, RSI: 0xffffff7f80000000, RDI: 0x0000000000000000
R8:  0x0000000000000000, R9:  0x0000000000000001, R10: 0xffffff802c956990, R11: 0xffffff7f80000000
R12: 0xffffff8009e00000, R13: 0x03fffffe048e4634, R14: 0x00000000b349c000, R15: 0xffffff80a3918d00
RFL: 0x0000000000010286, RIP: 0xffffff80003e87d9, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff8380000020, Error code: 0x0000000000000000, Fault CPU: 0x2, PL: 1, VF: 5

Backtrace (CPU 2), Frame : Return Address
0xffffff874343aee0 : 0xffffff800031961d mach_kernel : _handle_debugger_trap + 0x49d
0xffffff874343af30 : 0xffffff8000453ac5 mach_kernel : _kdp_i386_trap + 0x155
0xffffff874343af70 : 0xffffff800044564e mach_kernel : _kernel_trap + 0x4ee
0xffffff874343afc0 : 0xffffff80002bfa40 mach_kernel : _return_from_trap + 0xe0
0xffffff874343afe0 : 0xffffff8000318ce7 mach_kernel : _DebuggerTrapWithState + 0x17
0xffffff874343b0e0 : 0xffffff80003190d7 mach_kernel : _panic_trap_to_debugger + 0x227
0xffffff874343b130 : 0xffffff8000ac00bc mach_kernel : _panic + 0x54
0xffffff874343b1a0 : 0xffffff80004459fa mach_kernel : _sync_iss_to_iks + 0x2aa
0xffffff874343b320 : 0xffffff80004456f8 mach_kernel : _kernel_trap + 0x598
0xffffff874343b370 : 0xffffff80002bfa40 mach_kernel : _return_from_trap + 0xe0
0xffffff874343b390 : 0xffffff80003e87d9 mach_kernel : _vm_page_lookup + 0x1b9
0xffffff874343b4b0 : 0xffffff80003d8ae7 mach_kernel : _must_throttle_writes + 0x9d7
0xffffff874343b7e0 : 0xffffff80008b52c3 mach_kernel : _ubc_create_upl_kernel + 0x113
0xffffff874343b810 : 0xffffff8000569543 mach_kernel : _advisory_read_ext + 0x203
0xffffff874343b8c0 : 0xffffff80005698ef mach_kernel : _advisory_read_ext + 0x5af
0xffffff874343b930 : 0xffffff800056828b mach_kernel : _cluster_read_ext + 0x201b
0xffffff874343bab0 : 0xffffff8000566bbf mach_kernel : _cluster_read_ext + 0x94f
0xffffff874343bd00 : 0xffffff7f86a9f3d8 com.apple.filesystems.hfs.kext : _hfs_vnop_read + 0x250
0xffffff874343bd80 : 0xffffff800059d053 mach_kernel : _utf8_normalizestr + 0x573
0xffffff874343be30 : 0xffffff800089f332 mach_kernel : _preparefileread + 0x282
0xffffff874343bee0 : 0xffffff800089f4be mach_kernel : _pread_nocancel + 0x8e
0xffffff874343bf40 : 0xffffff8000983237 mach_kernel : _unix_syscall64 + 0x287
0xffffff874343bfa0 : 0xffffff80002c0206 mach_kernel : _hndl_unix_scall64 + 0x16
      Kernel Extensions in backtrace:
         com.apple.filesystems.hfs.kext(522.100.5)[87C3C850-D7CB-3289-8C3A-607DA94732B5]@0xffffff7f86a81000->0xffffff7f86aebfff
            dependency: com.apple.filesystems.hfs.encodings.kext(1)[0A512972-CFC2-37D3-856C-AE9C8007A449]@0xffffff7f81940000

BSD process name corresponding to current thread: qbittorrent
Boot args: npci=0x2000 darkwake=0 keepsyms=1 agdpmod=pikera

Mac OS version:
19H114

Kernel version:
Darwin Kernel Version 19.6.0: Tue Nov 10 00:10:30 PST 2020; root:xnu-6153.141.10~1/RELEASE_X86_64
Kernel UUID: A477D537-F87E-3978-8D7F-A84B7C02E62E
__HIB  text base: 0xffffff8000100000
System model name: MacPro7,1 (Mac-27AD2F918AE68F61)
System shutdown begun: NO
Panic diags file available: YES (0x0)

System uptime in nanoseconds: 2542667957197
last loaded kext at 26845953528: >!A!BMultitouch    97 (addr 0xffffff7f86aec000, size 57344)
loaded kexts:
com.tuxera.filesystems.tuxera_ntfs    2018.12.4
com.uaudio.driver.UAFWAudio    4.3.1 47542
com.uaudio.driver.UAD2System    9.13.0
com.intel.driver.EnergyDriver    3.7.0
ru.joedm.SMCSuperIO    1.2.0
hu.interferenc.TSCAdjustReset    1.1
as.vit9696.SMCProcessor    1.2.0
as.vit9696.VirtualSMC    1.2.0
org.acidanthera.NVMeFix    1.0.5
meow.IOIIIO.MacProMemoryNotificationDisabler    1.0.0
as.vit9696.!AALC    1.5.7
as.vit9696.WhateverGreen    1.4.7
as.vit9696.Lilu    1.5.1
>!A!BMultitouch    97
>AudioAUUC    1.70
@fileutil    20.036.15
@filesystems.autofs    3.0
>!AUpstreamUserClient    3.6.8
>!AMCCSControl    1.14
@kext.AMDRadeonServiceManager    3.1.0
@kext.AMDRadeonX6000    3.1.0
>!AGraphicsDevicePolicy    5.2.7
@AGDCPluginDisplayMetrics    5.2.7
>!APlatformEnabler    2.7.0d0
>AGPM    111.4.4
>X86PlatformShim    1.0.0
>!AHDAHardwareConfigDriver    283.15
>!AHDA    283.15
>!AGFXHDA    100.1.429
>!A!IPCHPMC    2.0.1
|Broadcom!B20703USBTransport    7.0.6f8
>ACPI_SMC_PlatformPlugin    1.0.0
>!ASMCLMU    212
>!AHV    1
|IOUserEthernet    1.0.1
|IO!BSerialManager    7.0.6f8
>pmtelemetry    1
@Dont_Steal_Mac_OS_X    7.0.0
>!A!ISlowAdaptiveClocking    4.0.0
>!AFIVRDriver    4.1.0
>!A!IMCEReporter    115
@private.KextAudit    1.0
|IO!BUSBDFU    7.0.6f8
@filesystems.apfs    1412.141.1
>!AFileSystemDriver    3.0.1
>!AVirtIO    1.0
@filesystems.hfs.kext    522.100.5
@!AFSCompression.!AFSCompressionTypeDataless    1.0.0d1
>AirPort.BrcmNIC    1400.1.1
@BootCache    40
@!AFSCompression.!AFSCompressionTypeZlib    1.0.0
>!AAHCIPort    341.140.1
>!AHPET    1.8
>!ARTC    2.0
>!AACPIButtons    6.1
>!ASMBIOS    2.1
>!AAPIC    1.7
$!AImage4    1
@nke.applicationfirewall    303
$TMSafetyNet    8
@!ASystemPolicy    2.0.0
|EndpointSecurity    1
>IO!BHIDDriver    7.0.6f8
>!AMultitouchDriver    3440.1
>!AInputDeviceSupport    3440.8
@kext.triggers    1.0
|IOAccelerator!F2    438.7.3
@kext.AMDRadeonX6000HWLibs    1.0
@kext.AMDRadeonX6000HWServices    3.1.0
>!AGraphicsControl    5.2.7
>!AHIDKeyboard    209
>DspFuncLib    283.15
@kext.OSvKernDSPLib    529
>!ASMBus!C    1.0.18d1
|IOSMBus!F    1.1
>!ASMBusPCI    1.0.14d1
|IONDRVSupport    576.1
>!AHDA!C    283.15
|IOHDA!F    283.15
@kext.AMDRadeonX6000Framebuffer    3.1.0
|Broadcom!BHost!CUSBTransport    7.0.6f8
|IO!BHost!CUSBTransport    7.0.6f8
|IO!BHost!CTransport    7.0.6f8
>IOPlatformPluginLegacy    1.0.0
>X86PlatformPlugin    1.0.0
>IOPlatformPlugin!F    6.0.0d8
@kext.AMDSupport    3.1.0
|IOFireWire!F    4.7.5
|IOAVB!F    850.1
|IO!B!F    7.0.6f8
|IO!BPacketLogger    7.0.6f8
@!AGPUWrangler    5.2.7
@!AGraphicsDeviceControl    5.2.7
|IOGraphics!F    576.1
|IOSlowAdaptiveClocking!F    1.0.0
@plugin.IOgPTPPlugin    840.3
|IOEthernetAVB!C    1.1.0
|IOAHCIBlock!S    316.100.5
>usb.!UHub    1.2
>usb.IOUSBHostHIDDevice    1.2
>!UAudio    323.4
>usb.cdc    5.0.0
>usb.networking    5.0.0
>usb.!UHostCompositeDevice    1.2
>!AXsanScheme    3
>!AThunderboltNHI    5.8.6
|IOThunderbolt!F    7.6.1
>!UMergeNub    900.4.2
|IOAudio!F    300.2
@vecLib.kext    1.2.0
|IOSerial!F    11
|IONVMe!F    2.1.0
|IO80211!F    1200.12.2b1
>mDNSOffloadUserClient    1.0.1b8
>corecapture    1.0.4
|IOSkywalk!F    1
|IOSurface    269.11
@filesystems.hfs.encodings.kext    1
|IOAHCI!F    290.0.1
>usb.!UXHCIPCI    1.2
>usb.!UXHCI    1.2
>usb.!UHostPacketFilter    1.0
|IOUSB!F    900.4.2
>!AEFINVRAM    2.1
>!AEFIRuntime    2.1
|IOHID!F    2.0.0
$quarantine    4
$sandbox    300.0
@kext.!AMatch    1.0.0d1
>DiskImages    493.0.0
>!AFDEKeyStore    28.30
>!AEffaceable!S    1.0
>!ASSE    1.0
>!AKeyStore    2
>!UTDM    489.120.1
|IOSCSIBlockCommandsDevice    422.120.3
>!ACredentialManager    1.0
>KernelRelayHost    1
>!ASEPManager    1.0.1
>IOSlaveProcessor    1
|IOUSBMass!SDriver    157.140.1
|IOSCSIArchitectureModel!F    422.120.3
|IO!S!F    2.1
|IOUSBHost!F    1.2
>!UHostMergeProperties    1.2
>usb.!UCommon    1.0
>!ABusPower!C    1.0
|CoreAnalytics!F    1
>!AMobileFileIntegrity    1.0.5
@kext.CoreTrust    1
|IOTimeSync!F    840.3
|IONetworking!F    3.4
|IOReport!F    47
>!AACPIPlatform    6.1
>!ASMC    3.1.9
>watchdog    1
|IOPCI!F    2.9
|IOACPI!F    1.4
@kec.pthread    1
@kec.corecrypto    1.0
@kec.Libm    1


Sometimes when I turn on the wallpaper it is black and setting it from the preferences is impossible.
The only solution is to restart or use the "Killall Dock" terminal command.
However, I noticed that this problem could be caused by overclocking, but it's just my guess, because it appeared after many months of use without problems.


Could anyone help me investigate and maybe fix? Fixed this, the resulting EFI folder could also be added to the first page if you want, as an updated Clover 5131 EFI.
 

Attachments

  • EFI Clover 5131 X299X-Designare-10G.zip
    3.9 MB · Views: 1
  • X299X-Designare-10G-Lele.ioreg
    6.2 MB · Views: 1
Top