Gigabyte GeForce GT 710, HS 10.13.5, Resolution ( 1920x1080 )

[EasyTune]

Hi

( Bios and Clover settings at the end )

I am pretty happy with my first hackintosh, even after spending hours reading different threads. However, for this one I really need help. For some reason I can't choose 1920x1080 in my display settings.

View media item 190676
So far, the best resolution I can select is 1080p. With the internal UHD 630, which I used before, I had the same problem. So I decided to buy a cheap Gigabyte GeForce GT 710 because based on different comments I thought it will be easier to setup. When I first started my computer with the new GT 710 I followed the solutions below.

1. Setup without Web Drivers

- I have Nvidia GT 710 in my system with GA-B85M-DS3H + Intel i3 4160 (Intel HD 4400)
- Nvidia GT 710 is natively supported in macOS High Sierra 10.13.0 to 10.13.2 .
- It needs No "NvidiaWeb driver", No "FakeID" , No "ig-platform-ID"
- It needs "[√]Inject Nvidia" in config.plist_"Graphics" section.

Source: https://www.tonymacx86.com/threads/...-with-the-nvidia-gt-710-graphics-card.241104/

Unfortunately nothing has changed after reboot. So I tried another solution.

2. Setup with Web Drivers, Lilu and NvidiaGraphicsFixup

- Install Nvidia Web driver for your installed version of macOS High Sierra from https://www.tonymacx86.com/nvidia-drivers/
- Install Lilu.kext ( latest version ) from RehabMan and NvidiaGraphicsFixup.kext ( for 10.13.5 ) to /System/ Library/
- Extensions using Kext Wizard or KextBeast ( I used Kext Wizard )
- Copy and paste Lilu.kext & Nvidia GraphicsFixup .kext to /EFI/CLOVER/kexts/Other of your System HDD
- In clover you have to have Inject Nvidia and web drivers checked, also make sure nv_disable=1 is NOT in there.
- Now Reboot and try

Source: https://www.tonymacx86.com/threads/...-sierra-using-nvidia-geforce-210-card.243705/

3. High Sierra 10.13.5
4. Gigabyte GeForce GT 710 connected to PHL BDM3201FD Display via HDMI
5. BIOS

M.I.T. : Advanced Memory Settings → Extreme Memory Profile(X.M.P.) : Profile1
BIOS → Fast Boot : Disabled
BIOS → LAN PXE Boot Option ROM : Disabled
BIOS → Storage Boot Option Control : UEFI
Peripherals → Initial Display Output : 1 Slot
Peripherals → Super IO Configuration → Serial Port : Disabled
Peripherals → Network Stack Configuration → Network Stack : Disabled
Peripherals → USB Configuration → XHCI Hand-off : Enabled
Chipset → Vt-d : Disabled
Chipset → Wake on LAN Enable : Disabled
Press F10 to Save and Exit the BIOS

6. Clover

Here are my settings in Clover and how I changed it.

- Open Clover Configurator
- In tab Mount EFI > EFI on EFI (disk0s1) I hit the button Mount Partition
- I hit the button Open Partition and went to EFI/CLOVER/.
- I opened the config.plist via File > Open or just dropped it in Clover Configurator.
- In tab Acpi no fixes are selected.
- In tab Boot only dart=0, disablegfxfirmware and Debug is selected.
- In tab Boot Graphics no settings.
- In tab CPU no settings.
- In tab Devices only USB Inject and USB FixOwnership are selected.
- In tab Disable Drivers no settings.
- In tab Graphics Inject NVidia checked. Inject Intel unchecked. Also no ig-plattform-id defined.
- In tab System Parameters Inject System ID and NvidiaWeb checked. Inject Kexts set to Yes.
- Save config.phtml via Clover Configurator
- Reboot

Any comment is appreciated!

 

[EasyTune]

It's me again. I still can't select 1920x1080 as you can see in the screenshot above. I tried pretty much everything in the thread below, but nothing has changed.

https://www.tonymacx86.com/threads/clover-bootloader-screen-resolution.150101/page-5

My desktop icons etc. with 1080p are still huge.

 

[Feartech]

It's me again. I still can't select 1920x1080 as you can see in the screenshot above. I tried pretty much everything in the thread below, but nothing has changed.

https://www.tonymacx86.com/threads/clover-bootloader-screen-resolution.150101/page-5

My desktop icons etc. with 1080p are still huge.

your screenshot has 1080p selected though?