Contribute
Register

GIGABYTE GA-Z77X-UP5 TH Thunderbolt (Updated to 10.8.2 and MultiBeast 5.2)

Status
Not open for further replies.
Joined
Dec 16, 2012
Messages
16
Motherboard
Gigabyte Z490 VISION D
CPU
Intel i7-10700
Graphics
Gigabyte Radeon RX 5500 XT OC
Mac
  1. iMac
  2. MacBook
  3. MacBook Air
Mobile Phone
  1. iOS
JohnSRQ,


As for the MiniDP cable, that is strange....because the connector is the same design (should be). Are you sure it is the correct socket type? Can you attach a photo of the end connector for us to see? As I'm intrigued...

Middleman and Morko pointed me in the right direction, I'd not installed the MB properly so two metal pins were blocking slightly the MiniDP's. I set the MB back in right and now I can plug display into MiniDP. Working much better than DVI port for me.

Thanks again.
 
Joined
Apr 21, 2012
Messages
372
Motherboard
Gigabyte Z77X-UP5 TH F11
CPU
E3-1240 V2
Graphics
GTX 660Ti x2 SLI
Mac
  1. iMac
  2. MacBook Pro
  3. Mac mini
Classic Mac
  1. Power Mac
Mobile Phone
  1. iOS
View attachment 43318
followed alphas simple guide to the tee, everything works until i restart then i get this, i am running the same hardware as alpha, i updated my bios to f12e, someone please help

what boot flags have you tried? Your using a GeForce 670, did you boot with "GraphicsEnabler=No"?
 
Joined
Dec 20, 2012
Messages
6
Motherboard
Z77X-up5 Th
CPU
I7 3770k
Graphics
Gtx 580
Mac
  1. MacBook Pro
Classic Mac
Mobile Phone
  1. iOS
Hi guys,

i have this Board with an i7 3770K and a have massive problems with my USB Ports.

I have installed ML without problems, but when i plug any USB device in the USB PORT ( Front or Back or USB2 or USB 3) , ML Freeze...

Here is screenshot from boot verbose...

Has anybody the same issue/problem?

regards
 

Attachments

  • boot2.JPG
    boot2.JPG
    184.5 KB · Views: 232
Joined
Jul 21, 2011
Messages
2
Motherboard
Gigabyte P67A-UD3-B3 F9 BIOS
CPU
I5 2500K
Graphics
XFX HD6850 1GB DDR5 XXX Edition
Mac
Classic Mac
Mobile Phone
Hi guys,

i have this Board with an i7 3770K and a have massive problems with my USB Ports.

I have installed ML without problems, but when i plug any USB device in the USB PORT ( Front or Back or USB2 or USB 3) , ML Freeze...

Here is screenshot from boot verbose...

Has anybody the same issue/problem?

regards

Having the same issue (I think) Installed a while ago and hadn't booted into OSX for a couple of weeks (using Windows 8 w/ClassicShell as my primary OS) and last night when I booted into OSX it was fine at the login screen, but as soon as it hit the Desktop it froze up. Sometimes it will give me an error that I need to hold down the power button to turn my computer off. When booting with -s, I get the USB error shown in the picture above. I can type Exit and it will boot to the login screen, but again once it gets to the Desktop it freezes.
 
Joined
May 10, 2011
Messages
2,725
Motherboard
Gigabyte B550 Vision D
CPU
Ryzen 5900X
Graphics
RX 6800
Mac
  1. iMac
  2. MacBook
  3. MacBook Air
  4. MacBook Pro
  5. Mac mini
  6. Mac Pro
Classic Mac
  1. Power Mac
  2. PowerBook
Mobile Phone
  1. iOS
Jreb58 & HP246,

Try following my guide here and see where you went wrong. If necessary check what Multibeast/BIOS settings you've used. I used BIOS F11 to cure all my problems>
http://www.tonymacx86.com/mountain-...th-wont-boot-without-x-option.html#post522256

Jreb, if you are using the Intel HD card only, you may need to use the "Graphics Mode"="1920x1200x32" as a kernel flag in your /Extras/org.chameleon.Boot.plist.
You can add it like this using Textedit:

<key>GraphicsMode</key>
<string>1920x1200x32></string>

HP246, you may need to check if your XHCI ports has been set to AUTO and if Preboot XHCI detection is turned on (to allow your USB 3.0 ports to be used at boot time). Also DO NOT INSTALL any USB 3.0 drivers with Multibeast - the onboard USB 3.0 will work with the native drivers.
 
Joined
Feb 5, 2011
Messages
118
Motherboard
Gigabyte X299 AORUS Gaming 7
CPU
i9-7900X
Graphics
5700XT
Mac
  1. Mac Pro
Classic Mac
  1. Apple
  2. iBook
  3. Performa
  4. Power Mac
  5. PowerBook
  6. SE
Mobile Phone
  1. Android
HP246, you may need to check if your XHCI ports has been set to AUTO and if Preboot XHCI detection is turned on (to allow your USB 3.0 ports to be used at boot time). Also DO NOT INSTALL any USB 3.0 drivers with Multibeast - the onboard USB 3.0 will work with the native drivers.

This is very true without these Bios settings you will have KP's
 
Joined
Jan 6, 2012
Messages
440
Motherboard
Gigabyte Aorus Z490 Elite
CPU
i9-10850K
Graphics
RX 580
Mobile Phone
  1. iOS
same here. must be because of this new bios.

Check the Wake on LAN setting in the BIOS. WoL when turned On will causes many motherboards not to shutdown properly, but just reboot.

-bth
 
Joined
Jan 3, 2011
Messages
828
Motherboard
Gigabyte Z370-HD3
CPU
i5-8600
Graphics
RX 560
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
NM, must not build hackintosh's late at night.......

AM
 
Status
Not open for further replies.
Top