- Joined
- Sep 8, 2021
- Messages
- 2
- Motherboard
- PRIME X299-DELUXE
- CPU
- i9 7920X
- Graphics
- vega 64
Thank you selfless dedication!Let's pursue this particular problem first, namely: UAD Apollo with one daisy-chained Satellite.
- Which satellite are you connecting in this scenario? The Quad or the Octo?
- Are both items running the latest firmware (this is firmware that is installed into the UAD devices)?
- Have both items been "hardware reset"?
- Are latest UAD drivers installed in macOS?
- The Asus Prime B550-Plus contains a Thunderbolt header. Is your GC-Alpine Ridge or Asus ThunderboltEX3-TR connected to that header?
- If so, please check the Thunderbolt settings in BIOS Setup. Is there a "Thunderbolt Boot" option? If so, does it have a "Boot Once" choice?
- Does macOS freeze on plugin load when either the GC-Alpine Ridge or ThunderboltEX3-TR is used?
My Apollo X6 and Twin Duo Daisy-Chained did it! No problem with cold start/hot start/cold plug/hot plug /USB/ sleep/wake up, perfect!
My system Caterina 10.15.7.
The motherboard is Asus X299 Deluxe.
GC-Titan-Rridge 2.0, firmware TitanridgenVM23-E64FR. bin, plug into the third slot, short wire 1 and 3, USB plug into the Thunder card. SSDT-DTPG.aml was not enabled, SSDT-PrimeX299Deluxe-Thunderbolt3.aml was enabled. Thunderbolt Settings in BIOS Setup 【Thunderbolt Boot】 【GPIO3】 【GPIO3 Filter】 option open
Last edited: