Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

[CaseySJ]

... my Ryzentosh has forgotten it's CPU. Did I enter the info correctly?.

Please try this:

• Enter 1537 for ProcessorType as shown:

 

[craighazan]

Look at you!.

Thanks!.

 

[oli.mathieu]

may be I could use windows 11 to find them ?!
I'm keep looking

I use USBToolBox on Windows 11 and I saw only one USB 2 port more
It seems that it's a USB 2 Hub for the 2 USB 2 headers (item 10)
But USBToolBox don't give any port name !!
I think the name was PO14 because it just under (in USBToolBox List) my Keyboard plugged in port named PO13
I edit my USB Kext ..from

to

I then enable The 2 SSDT USB and the edited Kext, in my config.plist

Et voilà

It's now working (USB 2 &3 drive appear on desktop )

The mystery why MacOS was not able to see that port under any circumstances is still there

Thanks @CaseySJ for the support

 

[rheneas]

You may be using the wrong config.plist. Which EFI ZIP did you download from the OC 0.7.5 Mini-Guide?

Are you using a Gigabyte B550 Vision D as well?

I downloaded EFI-075-BIOS-F13-B550-VISION-D. I knew that didn't match my board (GA-7170X-UD5), but that seemed to me to be what the original directions indicated. I've been trying to find a user with the same configuration who has successfully implemented 0C 0.7.5. I''m still stuck at 0.6.9.

 

[CaseySJ]

I use USBToolBox on Windows 11 and I saw only one USB 2 port
It seems that it a USB 2 Hub for the 2 USB 2 headers (item 10)
But USBToolBox don't give any port name !!
I think the name was PO14 because it just under (in USBToolBox List) my Keyboard plugged in port named PO13
I edit my USB Kext ..from
View attachment 535242
to
View attachment 535240
I then enable The 2 SSDT USB and the edited Kext, in my config.plist

Et voilà
View attachment 535243
It's now working (USB 2 &3 drive appear on desktop )

The mystery why MacOS was not able to see that port under any circumstances is still there

Thanks @CaseySJ for the support

Good work! Even on B550 Vision D, the internal USB 2 hub is on PO14.

 

[CaseySJ]

I downloaded EFI-075-BIOS-F13-B550-VISION-D. I knew that didn't match my board (GA-7170X-UD5), but that seemed to me to be what the original directions indicated. I've been trying to find a user with the same configuration who has successfully implemented 0C 0.7.5. I''m still stuck at 0.6.9.

This EFI files in this thread are only for AMD Ryzen processors on an AM4 motherboard. To configure OpenCore 0.7.5 for your Intel i7-6700 on Z170X-UD5, you could try an in-place upgrade from existing 0.6.9 by following this procedure:

Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

Are you using igfxfw=2 in boot arguments as described here? Yeah, I've done all of those things and tried a number of different headless framebuffers for UHD630, nothing gets it above 0.15GHz. Now wonder if it's a result of my vCore and loadline calibration adjustments? Either way it's a...

www.tonymacx86.com

However, there is one more step afterwards, which is to replace the entire previous OC/Resources folder with the one downloaded from the 0.7.5 EFI folder from this thread.

 

[rheneas]

This EFI files in this thread are only for AMD Ryzen processors on an AM4 motherboard. To configure OpenCore 0.7.5 for your Intel i7-6700 on Z170X-UD5, you could try an in-place upgrade from existing 0.6.9 by following this procedure:

Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

Are you using igfxfw=2 in boot arguments as described here? Yeah, I've done all of those things and tried a number of different headless framebuffers for UHD630, nothing gets it above 0.15GHz. Now wonder if it's a result of my vCore and loadline calibration adjustments? Either way it's a...

www.tonymacx86.com

However, there is one more step afterwards, which is to replace the entire previous OC/Resources folder with the one downloaded from the 0.7.5 EFI folder from this thread.

Thanks. I'll try that procedure and replace the Resources folder accordingly.

 

[basak]

Have you experienced OS X not booting with PBO enabled in the BIOS?

 

[Draft]

I have an issue with Thunderbolt 3 /USB-C on B550 vision D.
When I unplug one of them after shutdown, the computer restarts automatically.

I flashed Thunderbolt firmware in the past.
Do you have any idea ?

 

[CaseySJ]

I have an issue with Thunderbolt 3 /USB-C on B550 vision D.
When I unplug one of them after shutdown, the computer restarts automatically.

I flashed Thunderbolt firmware in the past.
Do you have any idea ?

All the usual questions apply:

• Which version of BIOS?
• Which version of macOS?
• Which Thunderbolt device?
• When did problem first occur? Did problem start recently, but never happened prior to a certain date?
• Which version of firmware was flashed?