- Joined
- Jul 21, 2016
- Messages
- 367
- Motherboard
- Gigabyte Z690 Aero G
- CPU
- i9-12900K
- Graphics
- RX 6800 XT
- Mac
- Mobile Phone
Hello @zzmadd,Hi all, maybe you can help...
I'd like to build a dual boot PC/hack using a Ryzen 5 5600X and a B550 ITX board. Can you advice of a good working B550 ITX board?
Thanks all for your help.
Hello @zzmadd,
Installing macOS on an AMD Ryzen system is not too difficult, but it is a little more complicated than an Intel system. Are you aware of the following?
- AMD-OSX kernel patches for AMD Ryzen systems? And how to install them into your config.plist?
- AMDRyzenCPUPowerManagement kext (GitHub --> trulyspinach)?
- Only use VirtualSMC.kext, but not the other kexts supplied with VirtualSMC
- Mapping USB ports when there are 3 USB controllers?
- In some cases it may not be necessary to map USB ports, but this will vary from system to system.
- At first you can try enabling XhciPortLimit kernel quirk and not using any USB port map.
- Check if sleep/wake works. If it does not work, then USB port map will most likely be necessary.
Already disabled. Thanks@Vorshim92
For shutdown problems on AMD we generally have to disable Wake on Lan in the BIOS.
Already disabled. Thanks
ASRock's AMD AM4 motherboards have absolutely terrible BIOS implementation! They should be avoided. I struggled for a long time to fix all kinds of little problems on these boards...... but for now I'm with an Asrock x570m pro4 ...
So I absolutely need b550 thanksASRock's AMD AM4 motherboards have absolutely terrible BIOS implementation! They should be avoided. I struggled for a long time to fix all kinds of little problems on these boards...
Regarding CH341a programmers, please search Amazon for "ch341a 3.3v". Then simply post links to two or three candidates and I can check them out for you.
Please use this one: