Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

[mrfatcatt]

ok, installed. Still getting crash on reboot . ethernet not working yet

 

[CaseySJ]

ok, installed. Still getting crash on reboot . ethernet not working yet

Are you sure you don't want to find a B550 Vision D (not D-P) instead? It can be very challenging to fix post-installation issues on AMD systems. I bet sleep/wake is not working either?

 

[mrfatcatt]

I might have to, but ide have to return the stuff to amazon and they have none in stock. I wanna see if the tb card will work.

 

[xtreem.p]

Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

@CaseySJ after many months of ignoring the step in your instructions for making a backup, I finally did so. I'm using an external USB 3.1 Gen 2 enclosure for an M2 SSD. This mydigitalssd M2X, to be precise. I have not yet attempted to boot directly from the M2 itself (i.e., removing from the...

www.tonymacx86.com

thats good news @CaseySJ !

Did you get the Networking going with smalltreeintel82576.kext?

 

[CaseySJ]

OK I’ll post my results tonight late or tommorow. Long day ahead of me.

Thank you for the heads up on the USB ports.

Regarding Ethernet port, the general procedure is as follows:

1. We run Hackintool and view the PCIe list. This often tells us the model number of the Ethernet port or any other connected device.
2. Based on the model number we determine whether the device is natively supported in macOS or whether a third-party driver (kext) is needed.
   • If you tell us the model number, we can help you.

 

[mrfatcatt]

@CaseySJ

Here are the files. I added the Maple Ridge 2.0 It works in Windows so far. I think my RME firmware needs to be downgrade to 44 instead 46 because 46 is forcing me to restart the even in Windows.

So I'm not sure the crashes are AMD just yet.
HackIntool PCIe and IOReg with TB card.

Good to have a look to check out the board.

 

[CaseySJ]

@CaseySJ

Here are the files. I added the Maple Ridge 2.0 It works in Windows so far. I think my RME firmware needs to be downgrade to 44 instead 46 because 46 is forcing me to restart the even in Windows.

So I'm not sure the crashes are AMD just yet.
HackIntool PCIe and IOReg with TB card.

Good to have a look to check out the board.

• Which motherboard are these files from (make and model)?
• There is an Intel i225-V Ethernet port on this board.
  • Its PCI address is: PciRoot(0x0)/Pci(0x1,0x2)/Pci(0x0,0x0)/Pci(0x5,0x0)/Pci(0x0,0x0)
• There is also Titan Ridge Thunderbolt (not Maple Ridge).
  • Its PCI path is: _SB.PCI0.BXBR.BYUP.BYD1
• There are three USB controllers:
  • Controller 1: _SB.PCI0.BXBR.BYUP.BYD8.XHC0
  • Controller 2: _SB.PCI0.BXBR.BYUP.BYD8.XHC1
  • Controller 3: _SB.PCI0.GP13.XHC0

 

[mrfatcatt]

X570S AERO G (Rev. 1.0) f2 BIOS.

X570S AERO G (rev. 1.x) Support | Motherboard - GIGABYTE Global

Lasting Quality from GIGABYTE.GIGABYTE Ultra Durable™ motherboards bring together a unique blend of features and technologies that offer users the absolute ...

www.gigabyte.com

I haven't got TB to work, BTW.

 

[CaseySJ]

X570S AERO G (Rev. 1.0) f2 BIOS.

X570S AERO G (rev. 1.x) Support | Motherboard - GIGABYTE Global

Lasting Quality from GIGABYTE.GIGABYTE Ultra Durable™ motherboards bring together a unique blend of features and technologies that offer users the absolute ...

www.gigabyte.com

I haven't got TB to work, BTW.

Are you using a GC-Titan Ridge add-in-card?

I can modify your config.plist for Ethernet and provide a SSDT for Thunderbolt. Should have this for you in a couple of hours.

 

[mrfatcatt]

yes the add in card version 2 fw 50..thanks maybe we can get up and running!

The tb audio works very well in windows, no glitches. Should be a great mobo for pro audio users. i like to keep it if possible