Contribute
Register

Gigabyte B550 Vision D (Thunderbolt 3) + AMD Ryzen 7 3700X + AMD RX 5600 XT

Joined
Mar 3, 2013
Messages
138
Motherboard
Gigabyte B550 Vision D
CPU
5600X
Graphics
RX580
Mac
  1. MacBook Pro
Mobile Phone
  1. Android
  2. iOS
F13 to F14 and freeze entire pc.
I have this problem too, but also on F13 (i think also on F10) and the only way to make it works is to boot first on Windows and then reboot to Mac. Did you see if your wifi was enabled before the freeze?
 
Joined
Mar 3, 2013
Messages
138
Motherboard
Gigabyte B550 Vision D
CPU
5600X
Graphics
RX580
Mac
  1. MacBook Pro
Mobile Phone
  1. Android
  2. iOS
Anyone OpenCore with dual boot Win/OSX? I'm encountering strange freeze at first boot on hackintosh after a minute I reach the Desktop. It happens 2/4 of the time. I think is related to Windows: if I shutdown the PC from Windows and then after a short period I turn on it choosing OSX as first boot, I encountering strange behaviors like Wireless Intel not working, Thunderbolt, too. (But I can see the device on IOReg, strange fact.) Then it freezes. (I have just 1 or 2 minutes before the freeze to check all of this. xD I also have the time to save an IOReg.) Any ideas?
After the freeze I have to force reboot. When I come back after Windows restart, I see the kernel panic image ,and then I have the report log. I've shared it below:

Panic(CPU 0, time 69172097239): NMIPI for unresponsive processor: TLB flush timeout, TLB state:0x0
RAX: 0x4889e8969eba0001, RBX: 0x0000000000000002, RCX: 0xffffff801e6a44ed, RDX: 0xffffff801e6a47f0
RSP: 0xffffffa0a420cdd0, RBP: 0xffffffa0a420ce50, RSI: 0x0000000000000002, RDI: 0xffffffa117479003
R8: 0x0000000000000003, R9: 0x0000000000000083, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0x0000000000006001, R15: 0xffffffa117479003
RFL: 0x0000000000000087, RIP: 0xffffff801e6a44f1, CS: 0x0000000000000008, SS: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffffa0a420cc80 : 0xffffff801e7c372b
0xffffffa0a420ccd0 : 0xffffff801e630d39
0xffffffa0a420ce50 : 0xffffff7fb7ccd2b0
0xffffffa0a420ce80 : 0xffffff7fb7cce0b7
0xffffffa0a420ced0 : 0xffffff801edf1da1
0xffffffa0a420cf00 : 0xffffff802118d381
0xffffffa0a420cf50 : 0xffffff801f732774
0xffffffa0a420cf60 : 0xffffff801f73b5fd
0xffffffa0a420cf80 : 0xffffff801e7c377d
0xffffffa0a420cfd0 : 0xffffff801e630bdd
0xffffffc11ddd3fa0 : 0xffffff801e630133
Kernel Extensions in backtrace:
com.apple.iokit.IOPCIFamily(2.9)[C14212B3-F922-3073-B54C-9DE243057AF4]@0xffffff802116b000->0xffffff8021193fff
com.apple.driver.AppleACPIPlatform(6.1)[64ECC08C-0059-346F-9383-B427C7FB60F2]@0xffffff801f72b000->0xffffff801f7a2fff
dependency: com.apple.driver.AppleSMC(3.1.9)[011F9DC7-68B0-3D73-B07E-A7E9DFAB6C60]@0xffffff801fd56000->0xffffff801fd6efff
dependency: com.apple.iokit.IOACPIFamily(1.4)[5B13B648-2033-3C43-9806-CC47FED932BC]@0xffffff8020c44000->0xffffff8020c45fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[C14212B3-F922-3073-B54C-9DE243057AF4]@0xffffff802116b000->0xffffff8021193fff
com.apple.driver.AppleGFXHDA(100.1.433)[9CC797E8-D291-3656-B826-D5F42DE851E2]@0xffffff7fb7cc5000->0xffffff7fb7d23fff
dependency: com.apple.iokit.IOAudioFamily(300.6.1)[F6263838-C350-3F2D-9C38-A0B05222BFD4]@0xffffff7fb943d000->0xffffff7fb945afff
dependency: com.apple.iokit.IOGraphicsFamily(585.2)[18F5DD47-7688-37AB-A74A-5AF8B45A4E0F]@0xffffff7fb953c000->0xffffff7fb956afff
dependency: com.apple.iokit.IONDRVSupport(585.2)[96CB8C0E-E3A4-32A1-90B8-BF25BEED72E7]@0xffffff7fb9581000->0xffffff7fb9589fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[C14212B3-F922-3073-B54C-9DE243057AF4]@0xffffff802116b000->0xffffff8021193fff

Process name corresponding to current thread: kernel_task
Boot args: itlwm_cc=IT chunklist-security-epoch=0 -chunklist-no-rev2-dev

Mac OS version:
20G314

Kernel version:
Darwin Kernel Version 20.6.0: Wed Nov 10 22:23:07 PST 2021; root:xnu-7195.141.14~1/RELEASE_X86_64
Kernel UUID: C67468D8-72C1-36BC-A0DA-CD5FA852AD32
KernelCache slide: 0x000000001e400000
KernelCache base: 0xffffff801e600000
Kernel slide: 0x000000001e410000
Kernel text base: 0xffffff801e610000
__HIB text base: 0xffffff801e500000
System model name: iMacPro1,1 (Mac-7BA5B2D9E42DDD94)
System shutdown begun: NO
Panic diags file available: YES (0x0)
Hibernation exit count: 0

System uptime in nanoseconds: 69172127706
Last Sleep: absolute base_tsc base_nano
Uptime : 0x000000101afae9c5
Sleep : 0x0000000000000000 0x0000000000000000 0x0000000000000000
Wake : 0x0000000000000000 0x000000176725e5c7 0x0000000000000000
panic(cpu 1 caller 0xffffff801e79ce51): "IPI timeout, unresponsive CPU bitmap: 0x1, NMIPI acks: 0x0, now: 0x1, deadline: 68865282303, pre-NMIPI time: 0x100ef4ac1b, current: 0x101afaeeb3, global: 0"@/System/Volumes/Data/SWE/macOS/BuildRoots/9dc5c14c79/Library/Caches/com.apple.xbs/Sources/xnu/xnu-7195.141.14/osfmk/x86_64/pmap.c:2905
Backtrace (CPU 1), Frame : Return Address
0xffffffc11ddcb1b0 : 0xffffff801e68c26d
0xffffffc11ddcb200 : 0xffffff801e7d3993
0xffffffc11ddcb240 : 0xffffff801e7c3f8a
0xffffffc11ddcb290 : 0xffffff801e630a2f
0xffffffc11ddcb2b0 : 0xffffff801e68ba8d
0xffffffc11ddcb3d0 : 0xffffff801e68bd83
0xffffffc11ddcb440 : 0xffffff801ee9c7ba
0xffffffc11ddcb4b0 : 0xffffff801e79ce51
0xffffffc11ddcb570 : 0xffffff801e7a2f2c
0xffffffc11ddcb650 : 0xffffff801e7a3d16
0xffffffc11ddcb6b0 : 0xffffff801e731ed5
0xffffffc11ddcb800 : 0xffffff801e731823
0xffffffc11ddcb830 : 0xffffff801e72af31
0xffffffc11ddcb860 : 0xffffff801ed528e3
0xffffffc11ddcb880 : 0xffffff801edfefc2
0xffffffc11ddcb8b0 : 0xffffff801edf3e8d
0xffffffc11ddcb910 : 0xffffff7fb940d8bf
0xffffffc11ddcb930 : 0xffffff7fb93db93b
0xffffffc11ddcb960 : 0xffffff7fb93dbc77
0xffffffc11ddcb990 : 0xffffff7fb93e642a
0xffffffc11ddcb9d0 : 0xffffff801ee1ea51
0xffffffc11ddcba80 : 0xffffff801ee1d10a
0xffffffc11ddcbad0 : 0xffffff7fb93e7af8
0xffffffc11ddcbb20 : 0xffffff801ee2731b
0xffffffc11ddcbc80 : 0xffffff801e77f1d1
0xffffffc11ddcbd90 : 0xffffff801e6918ed
0xffffffc11ddcbe00 : 0xffffff801e667c35
0xffffffc11ddcbe60 : 0xffffff801e67f3e2
0xffffffc11ddcbef0 : 0xffffff801e7a805d
0xffffffc11ddcbfa0 : 0xffffff801e631216
Kernel Extensions in backtrace:
com.apple.iokit.IOAcceleratorFamily2(442.9)[F7B6BAA2-1B1C-3905-9242-208418037EC3]@0xffffff7fb93ba000->0xffffff7fb9424fff
dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[69A9D9EF-33A7-3D13-B753-5B810032ABBF]@0xffffff801fcc0000->0xffffff801fcd5fff
dependency: com.apple.iokit.IOGraphicsFamily(585.2)[18F5DD47-7688-37AB-A74A-5AF8B45A4E0F]@0xffffff7fb953c000->0xffffff7fb956afff
dependency: com.apple.iokit.IOPCIFamily(2.9)[C14212B3-F922-3073-B54C-9DE243057AF4]@0xffffff802116b000->0xffffff8021193fff
dependency: com.apple.iokit.IOReportFamily(47)[37461963-03B3-38F8-89AE-C2E4CF31422B]@0xffffff80211a2000->0xffffff80211a4fff
dependency: com.apple.iokit.IOSurface(290.8.1)[702BEA50-24DD-36A9-A53B-71AE8C33EA3C]@0xffffff8021295000->0xffffff80212b1fff

Process name corresponding to current thread: WindowServer
Panic(CPU 0, time 72313709553): NMIPI for unresponsive processor: TLB flush timeout, TLB state:0x0

RAX: 0x87f29918813a0001, RBX: 0x0000000000000001, RCX: 0xffffff80154a44e2, RDX: 0xffffff80154a47f0

RSP: 0xffffffa09ae6bdb0, RBP: 0xffffffa09ae6be30, RSI: 0x0000000000000001, RDI: 0xffffffa10e005083

R8: 0x0000000000000003, R9: 0x0000000000000083, R10: 0x0000000000000000, R11: 0x0000000000000000

R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0x0000000000000024, R15: 0xffffffa10e005083

RFL: 0x0000000000000087, RIP: 0xffffff80154a44e6, CS: 0x0000000000000008, SS: 0x0000000000000000

Backtrace (CPU 0), Frame : Return Address

0xffffffa09ae6bc60 : 0xffffff80155c372b

0xffffffa09ae6bcb0 : 0xffffff8015430d39

0xffffffa09ae6be30 : 0xffffff7faead3cff

0xffffffa09ae6be80 : 0xffffff7faeace099

0xffffffa09ae6bed0 : 0xffffff8015bf1da1

0xffffffa09ae6bf00 : 0xffffff8017f8d381

0xffffffa09ae6bf50 : 0xffffff8016532774

0xffffffa09ae6bf60 : 0xffffff801653b5fd

0xffffffa09ae6bf80 : 0xffffff80155c377d

0xffffffa09ae6bfd0 : 0xffffff8015430bdd

0xffffffa1148fbfa0 : 0xffffff8015430133

Kernel Extensions in backtrace:

com.apple.iokit.IOPCIFamily(2.9)[C14212B3-F922-3073-B54C-9DE243057AF4]@0xffffff8017f6b000->0xffffff8017f93fff

com.apple.driver.AppleACPIPlatform(6.1)[64ECC08C-0059-346F-9383-B427C7FB60F2]@0xffffff801652b000->0xffffff80165a2fff

dependency: com.apple.driver.AppleSMC(3.1.9)[011F9DC7-68B0-3D73-B07E-A7E9DFAB6C60]@0xffffff8016b56000->0xffffff8016b6efff

dependency: com.apple.iokit.IOACPIFamily(1.4)[5B13B648-2033-3C43-9806-CC47FED932BC]@0xffffff8017a44000->0xffffff8017a45fff

dependency: com.apple.iokit.IOPCIFamily(2.9)[C14212B3-F922-3073-B54C-9DE243057AF4]@0xffffff8017f6b000->0xffffff8017f93fff

com.apple.driver.AppleGFXHDA(100.1.433)[9CC797E8-D291-3656-B826-D5F42DE851E2]@0xffffff7faeac5000->0xffffff7faeb23fff

dependency: com.apple.iokit.IOAudioFamily(300.6.1)[F6263838-C350-3F2D-9C38-A0B05222BFD4]@0xffffff7fb023d000->0xffffff7fb025afff

dependency: com.apple.iokit.IOGraphicsFamily(585.2)[18F5DD47-7688-37AB-A74A-5AF8B45A4E0F]@0xffffff7fb033c000->0xffffff7fb036afff

dependency: com.apple.iokit.IONDRVSupport(585.2)[96CB8C0E-E3A4-32A1-90B8-BF25BEED72E7]@0xffffff7fb0381000->0xffffff7fb0389fff

dependency: com.apple.iokit.IOPCIFamily(2.9)[C14212B3-F922-3073-B54C-9DE243057AF4]@0xffffff8017f6b000->0xffffff8017f93fff



Process name corresponding to current thread: kernel_task

Boot args: itlwm_cc=IT chunklist-security-epoch=0 -chunklist-no-rev2-dev



Mac OS version:

20G314



Kernel version:

Darwin Kernel Version 20.6.0: Wed Nov 10 22:23:07 PST 2021; root:xnu-7195.141.14~1/RELEASE_X86_64

Kernel UUID: C67468D8-72C1-36BC-A0DA-CD5FA852AD32

KernelCache slide: 0x0000000015200000

KernelCache base: 0xffffff8015400000

Kernel slide: 0x0000000015210000

Kernel text base: 0xffffff8015410000

__HIB text base: 0xffffff8015300000

System model name: iMacPro1,1 (Mac-7BA5B2D9E42DDD94)

System shutdown begun: NO

Panic diags file available: YES (0x0)

Hibernation exit count: 0



System uptime in nanoseconds: 72313734189

Last Sleep: absolute base_tsc base_nano

Uptime : 0x00000010d63c0582

Sleep : 0x0000000000000000 0x0000000000000000 0x0000000000000000

Wake : 0x0000000000000000 0x000000148b3b0eee 0x0000000000000000

panic(cpu 3 caller 0xffffff801559ce51): "IPI timeout, unresponsive CPU bitmap: 0x1, NMIPI acks: 0x0, now: 0x1, deadline: 72208654596, pre-NMIPI time: 0x10cff8a161, current: 0x10d63c0962, global: 0"@/System/Volumes/Data/SWE/macOS/BuildRoots/9dc5c14c79/Library/Caches/com.apple.xbs/Sources/xnu/xnu-7195.141.14/osfmk/x86_64/pmap.c:2905

Backtrace (CPU 3), Frame : Return Address

0xffffffa1144c2ea0 : 0xffffff801548c26d

0xffffffa1144c2ef0 : 0xffffff80155d3993

0xffffffa1144c2f30 : 0xffffff80155c3f8a

0xffffffa1144c2f80 : 0xffffff8015430a2f

0xffffffa1144c2fa0 : 0xffffff801548ba8d

0xffffffa1144c30c0 : 0xffffff801548bd83

0xffffffa1144c3130 : 0xffffff8015c9c7ba

0xffffffa1144c31a0 : 0xffffff801559ce51

0xffffffa1144c3260 : 0xffffff80155a2f2c

0xffffffa1144c3340 : 0xffffff80155a3d16

0xffffffa1144c33a0 : 0xffffff8015531ed5

0xffffffa1144c34f0 : 0xffffff8015531823

0xffffffa1144c3520 : 0xffffff801552af31

0xffffffa1144c3550 : 0xffffff801549bf18

0xffffffa1144c35a0 : 0xffffff801549bd71

0xffffffa1144c3600 : 0xffffff801549c8a0

0xffffffa1144c3620 : 0xffffff8016931dc5

0xffffffa1144c36b0 : 0xffffff801576a2d1

0xffffffa1144c3820 : 0xffffff8018609cf7

0xffffffa1144c3940 : 0xffffff8018609812

0xffffffa1144c3a30 : 0xffffff8015ab666e

0xffffffa1144c3b10 : 0xffffff801550f268

0xffffffa1144c3b70 : 0xffffff801551efee

0xffffffa1144c3c80 : 0xffffff8015524805

0xffffffa1144c3f00 : 0xffffff80155c45a0

0xffffffa1144c3fa0 : 0xffffff801543091f

Kernel Extensions in backtrace:

com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0)[6D2DD1B0-2555-3EDA-8A4F-17B6E6EBD489]@0xffffff8016926000->0xffffff8016936fff

com.apple.filesystems.apfs(1677.141.2)[7FF8AEBF-C033-3629-B58C-E272B367E657]@0xffffff80185aa000->0xffffff8018719fff

dependency: com.apple.driver.AppleEFINVRAM(2.1)[9C0D8613-0F29-3DF4-B1A7-525F35C320CB]@0xffffff80168fe000->0xffffff8016907fff

dependency: com.apple.driver.AppleEffaceableStorage(1.0)[721DCBDB-97AE-3C52-B20C-290DA577FB50]@0xffffff8016911000->0xffffff8016916fff

dependency: com.apple.iokit.CoreAnalyticsFamily(1)[544E2B78-0014-385F-ADD3-1C1DA5D98F8C]@0xffffff8016d6d000->0xffffff8016d73fff

dependency: com.apple.iokit.IOStorageFamily(2.1)[A2F853B6-9F01-36FC-84CD-2A4A4A12667F]@0xffffff801806e000->0xffffff801807ffff

dependency: com.apple.kec.corecrypto(11.1)[F120E3A4-F8B1-3C2B-8A70-24C44EDF133E]@0xffffff8018747000->0xffffff80187d8fff

dependency: com.apple.security.AppleImage4(3.0.0)[DEA1080F-9337-3071-B11A-3D4EEC27B523]@0xffffff801697d000->0xffffff801698dfff



Process name corresponding to current thread: Telegram
here my old post
 
Last edited:
Joined
Jul 10, 2019
Messages
30
Motherboard
Gigabyte B550 vision D
CPU
Ryzen 9 5900x
Graphics
RX 6900 XT
I have this problem too, but also on F13 (i think also on F10) and the only way to make it works is to boot first on Windows and then reboot to Mac. Did you see if your wifi was enabled before the freeze?
Yes, for me is the same problem on F13. I boot on Big Sur first; I reboot on Windows for working Bluetooth and Thunderbolt devices; and next rebooted on Big Sur for all working. I didn't check if it is WiFi is the because of freeze on F14. I will stay on F13 for the moment. Is not the most simply but it works. ;)
 
Joined
Dec 19, 2019
Messages
24
Motherboard
Gigabyte B550M Aorus Pro-P
CPU
Ryzen 5 5600X
Graphics
RX 580
Hello all,

I had some hackintosh issues a little while back and was able sort them out. I'm building a new system and have come across some issues. The system in question is a Gigabyte B550M Aorus Pro-P, with an AMD Ryzen 5 5600x and a MSI Radeon Rx 580 GPU. I'm using OC 0.7.8 and followed the OC carefully. My issue is I'm getting an Apple SMC Panic. It's been awhile in my hackintosh days since I've had that panic. This is the first AMD hack I've tried, well actually not the first. The first one I tried I was using an unsupported cpu, the Ryzen 5600G. Live and learn, right? Anyway, what might be the issue?

Thanks for the help.
 
Last edited:
Joined
Dec 19, 2019
Messages
24
Motherboard
Gigabyte B550M Aorus Pro-P
CPU
Ryzen 5 5600X
Graphics
RX 580
Hello all,

I solved my issue from above. Redid my EFI folder and installed Monterey. I do have 1 issue though. The cpu fan cycling high RPM and then the next minute running normally. I'm not putting a load on the system. seems like it does it whenever it wants to. Do I need some AMD specific kexts to control that?

Thanks,
Steve
 

CaseySJ

Moderator
Joined
Nov 11, 2018
Messages
19,154
Motherboard
Asus ProArt Z690-Creator
CPU
i7-12700K
Graphics
RX 6800 XT
Mac
  1. MacBook Air
  2. MacBook Pro
  3. Mac Pro
Classic Mac
  1. Quadra
Mobile Phone
  1. iOS
Hello all,

I solved my issue from above. Redid my EFI folder and installed Monterey. I do have 1 issue though. The cpu fan cycling high RPM and then the next minute running normally. I'm not putting a load on the system. seems like it does it whenever it wants to. Do I need some AMD specific kexts to control that?

Thanks,
Steve
Have you tried AMDRyzenCPUPowerManagement from trulyspinach?
Instructions:
  • Download AMD.Power.Gadget.app.zip and install in Applications folder.
  • Download AMDRyzenCPUPowerManagement.kext.zip and copy kext to EFI/OC/Kexts folder.
  • Download SMCAMDProcessor.kext.zip and copy kext to EFI/OC/Kexts folder as well.
Then in config.plist --> Kernel section add two entries:
  • One for AMDRyzenCPUPowerManagement.kext
  • One for SMCAMDProcessor.kext
The order should be:
  • Lilu
  • VitualSMC
  • AMDRyzenCPUPowerManagement
  • SMCAMDProcessor
After rebooting, you can run AMD Power Gadget from Applications folder. Please note that the following should not be used because they're for Intel boards only:
  • SMCProcessor.kext
  • SMCSuperIO.kext
 
Joined
Dec 19, 2019
Messages
24
Motherboard
Gigabyte B550M Aorus Pro-P
CPU
Ryzen 5 5600X
Graphics
RX 580
Instructions:
  • Download AMD.Power.Gadget.app.zip and install in Applications folder.
  • Download AMDRyzenCPUPowerManagement.kext.zip and copy kext to EFI/OC/Kexts folder.
  • Download SMCAMDProcessor.kext.zip and copy kext to EFI/OC/Kexts folder as well.
Then in config.plist --> Kernel section add two entries:
  • One for AMDRyzenCPUPowerManagement.kext
  • One for SMCAMDProcessor.kext
The order should be:
  • Lilu
  • VitualSMC
  • AMDRyzenCPUPowerManagement
  • SMCAMDProcessor
After rebooting, you can run AMD Power Gadget from Applications folder. Please note that the following should not be used because they're for Intel boards only:
  • SMCProcessor.kext
  • SMCSuperIO.kext
Thanks Casey! I grabbed the app and seems to be working well. However I do have a couple of issues. Not all of my USB ports are working. Specifically the USB 2.0 ports. On this mobo I have 4 on the back at the top. I have my USB ports mapped and kext file added and config.plist updated. All the USB 3.0 and 3.2 are working fine. It's not a huge deal, but would like to have them all working. At least to use a USB keyboard and mouse without taking up USB 3.0 ports. The second is sleep isn't working. It tries to go into sleep mode, but CPU fan speeds up for a second and the calms down and doesn't go to sleep. Any idea why it won't sleep?

Thanks,
Steve
 

CaseySJ

Moderator
Joined
Nov 11, 2018
Messages
19,154
Motherboard
Asus ProArt Z690-Creator
CPU
i7-12700K
Graphics
RX 6800 XT
Mac
  1. MacBook Air
  2. MacBook Pro
  3. Mac Pro
Classic Mac
  1. Quadra
Mobile Phone
  1. iOS
Thanks Casey! I grabbed the app and seems to be working well. However I do have a couple of issues. Not all of my USB ports are working. Specifically the USB 2.0 ports. On this mobo I have 4 on the back at the top. I have my USB ports mapped and kext file added and config.plist updated. All the USB 3.0 and 3.2 are working fine. It's not a huge deal, but would like to have them all working. At least to use a USB keyboard and mouse without taking up USB 3.0 ports. The second is sleep isn't working. It tries to go into sleep mode, but CPU fan speeds up for a second and the calms down and doesn't go to sleep. Any idea why it won't sleep?

Thanks,
Steve
Some comments:
  • USB port mapping on AMD Ryzen is more complicated than on Intel because there are usually two USB controllers.
  • Have you mapped both USB controllers?
  • Regarding sleep, it may be due to (a) insufficient USB port mapping and/or (b) issue with a GPP1 or some such root device. Please provide output of this command: pmset -g log | tail -750 > ~/Documents/sleeplog.txt.
    • This will create a file in Documents called sleeplog.txt
    • Please post that file
 
Joined
Dec 19, 2019
Messages
24
Motherboard
Gigabyte B550M Aorus Pro-P
CPU
Ryzen 5 5600X
Graphics
RX 580
Some comments:
  • USB port mapping on AMD Ryzen is more complicated than on Intel because there are usually two USB controllers.
  • Have you mapped both USB controllers?
  • Regarding sleep, it may be due to (a) insufficient USB port mapping and/or (b) issue with a GPP1 or some such root device. Please provide output of this command: pmset -g log | tail -750 > ~/Documents/sleeplog.txt.
    • This will create a file in Documents called sleeplog.txt
    • Please post that file

With USB ports, I'm not sure if I did or not. I know while doing it there were a lot of ports listed. I just put in either USB 3.0 or USB 2.0 device and looked to see if it popped up or not. Would both controllers show up in Hackintool, or need to add usb device controller in config.plist? So just checked Hackintool and 1 USB 3.0 controller shows up by name and the other just has ???. The one that has a name is listed by type as XHCO. The other listed as PTXH with ??? under name. Yeah, I may not have mapped them correctly for an Ryzen system.

With the sleep, here's the txt file.

Thanks,
Steve
 

Attachments

  • sleeplog.txt
    146.2 KB · Views: 21
Last edited:

CaseySJ

Moderator
Joined
Nov 11, 2018
Messages
19,154
Motherboard
Asus ProArt Z690-Creator
CPU
i7-12700K
Graphics
RX 6800 XT
Mac
  1. MacBook Air
  2. MacBook Pro
  3. Mac Pro
Classic Mac
  1. Quadra
Mobile Phone
  1. iOS
With USB ports, I'm not sure if I did or not. I know while doing it there were a lot of ports listed. I just put in either usb 3.0 or usb 2.0 device and looked to see if it popped up or not. Would both controllers show up in Hackintool, or need to add usb device controller in config.plist? So just checked Hackintool and 1 USB 3.0 controller shows up by name and the other just has ???. The one that has a name is listed by type as XHCO. The other listed as PTXH with ??? under name. Yeah, I may not have mapped them correctly for an Ryzen system.

With the sleep, here's the txt file.

Thanks,
Steve
We should not use Hackintool for USB port mapping. Instead, it’s better to use IORegistryExplorer. When a USB 2 or USB 3 device is connected, it will show up in green under one of the two USB controllers (XHC0 or PTXH). We can then build a table as shown in this post:
The first 5 columns are needed (“Type Remap” does not apply right now so it can be ignored). Then I can help you with the USB port map.

Regarding sleep, let’s finish the port map then get back to this issue. We should actually run that terminal command after inducing sleep. When the system wakes up, then the command should be run.
 
Last edited:
Top