generate ssdt

[pabloesco]

[FONT=Menlo]ssdtPRGen.sh v0.9 Copyright (c) 2011-2012 by † RevoGirl[/FONT]
[FONT=Menlo]             v6.6 Copyright (c) 2013 by † Jeroen[/FONT]
[FONT=Menlo]             v9.1 Copyright (c) 2013-2014 by Pike R. Alpha[/FONT]
[FONT=Menlo]----------------------------------------------------------------[/FONT]
[FONT=Menlo]System information: Mac OS X 10.9 (13A603)[/FONT]
[FONT=Menlo]Brandstring 'Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz'[/FONT]
[FONT=Menlo]Processor Declaration(s) Found in DSDT[/FONT]
[FONT=Menlo]Generating ssdt_pr.dsl for a MacBookAir5,2 [Mac-2E6FAB96566FE58C][/FONT]
[FONT=Menlo]Ivy Bridge Core i5-3317U processor [0x306A9] setup [0x0604][/FONT]
[FONT=Menlo]With a maximum TDP of 17 Watt, as specified by Intel[/FONT]
[FONT=Menlo]
[/FONT]
[FONT=Menlo][COLOR=#ff0000]Warning: Low Frequency Mode is 0 (unknown/unconfirmed)[/COLOR][/FONT]
[FONT=Menlo]         Now using 1200 MHz for Mobile processor[/FONT]
[FONT=Menlo]
[/FONT]
[FONT=Menlo]Number logical CPU's: 4 (Core Frequency: 1700 MHz)[/FONT]
[FONT=Menlo]Number of Turbo States: 9 (1800-2600 MHz)[/FONT]
[FONT=Menlo]Number of P-States: 15 (1200-2600 MHz)[/FONT]
[FONT=Menlo]Adjusting C-States for detected (mobile) processor[/FONT]
[FONT=Menlo]Injected C-States for CPU0 (C1,C3,C6,C7)[/FONT]
[FONT=Menlo]Injected C-States for CPU1 (C1,C2,C3)[/FONT]
[FONT=Menlo]
[/FONT]
[FONT=Menlo][COLOR=#ff0000]Warning: 'cpu-type' may be set improperly (0x0604 instead of 0x0704)[/COLOR][/FONT]
[FONT=Menlo]
[/FONT]
[FONT=Menlo][COLOR=#ff0000]IASL not found. Downloading iasl...[/COLOR][/FONT]
[FONT=Menlo]  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current[/FONT]
[FONT=Menlo]                                 Dload  Upload   Total   Spent    Left  Speed[/FONT]
[FONT=Menlo]  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0[/FONT]
[FONT=Menlo]chmod: /usr/local/bin/iasl: No such file or directory[/FONT]
[FONT=Menlo]Done.[/FONT]
[FONT=Menlo]sudo: /usr/local/bin/iasl: command not found[/FONT]
[FONT=Menlo]No application knows how to open /Users/paul/Desktop/ssdt_pr.dsl.[/FONT]

are this a normal , error ? i should ignore it ?

so ssdt_pr.dsl is generate with ssdtPRGen.sh
and SSDT.aml is generate with ProBook Installer 6.1.13r3

cleary and visible, don't don't fit one with other.

so what is the best one for using ?

now I'm really confuse

 

[RehabMan]

[FONT=Menlo]ssdtPRGen.sh v0.9 Copyright (c) 2011-2012 by † RevoGirl[/FONT]
[FONT=Menlo]             v6.6 Copyright (c) 2013 by † Jeroen[/FONT]
[FONT=Menlo]             v9.1 Copyright (c) 2013-2014 by Pike R. Alpha[/FONT]
[FONT=Menlo]----------------------------------------------------------------[/FONT]
[FONT=Menlo]System information: Mac OS X 10.9 (13A603)[/FONT]
[FONT=Menlo]Brandstring 'Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz'[/FONT]
[FONT=Menlo]Processor Declaration(s) Found in DSDT[/FONT]
[FONT=Menlo]Generating ssdt_pr.dsl for a MacBookAir5,2 [Mac-2E6FAB96566FE58C][/FONT]
[FONT=Menlo]Ivy Bridge Core i5-3317U processor [0x306A9] setup [0x0604][/FONT]
[FONT=Menlo]With a maximum TDP of 17 Watt, as specified by Intel[/FONT]
[FONT=Menlo]
[/FONT]
[FONT=Menlo][COLOR=#ff0000]Warning: Low Frequency Mode is 0 (unknown/unconfirmed)[/COLOR][/FONT]
[FONT=Menlo]         Now using 1200 MHz for Mobile processor[/FONT]
[FONT=Menlo]
[/FONT]
[FONT=Menlo]Number logical CPU's: 4 (Core Frequency: 1700 MHz)[/FONT]
[FONT=Menlo]Number of Turbo States: 9 (1800-2600 MHz)[/FONT]
[FONT=Menlo]Number of P-States: 15 (1200-2600 MHz)[/FONT]
[FONT=Menlo]Adjusting C-States for detected (mobile) processor[/FONT]
[FONT=Menlo]Injected C-States for CPU0 (C1,C3,C6,C7)[/FONT]
[FONT=Menlo]Injected C-States for CPU1 (C1,C2,C3)[/FONT]
[FONT=Menlo]
[/FONT]
[FONT=Menlo][COLOR=#ff0000]Warning: 'cpu-type' may be set improperly (0x0604 instead of 0x0704)[/COLOR][/FONT]
[FONT=Menlo]
[/FONT]
[FONT=Menlo][COLOR=#ff0000]IASL not found. Downloading iasl...[/COLOR][/FONT]
[FONT=Menlo]  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current[/FONT]
[FONT=Menlo]                                 Dload  Upload   Total   Spent    Left  Speed[/FONT]
[FONT=Menlo]  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0[/FONT]
[FONT=Menlo]chmod: /usr/local/bin/iasl: No such file or directory[/FONT]
[FONT=Menlo]Done.[/FONT]
[FONT=Menlo]sudo: /usr/local/bin/iasl: command not found[/FONT]
[FONT=Menlo]No application knows how to open /Users/paul/Desktop/ssdt_pr.dsl.[/FONT]

are this a normal , error ? i should ignore it ?

so ssdt_pr.dsl is generate with ssdtPRGen.sh
and SSDT.aml is generate with ProBook Installer 6.1.13r3

cleary and visible, don't don't fit one with other.

so what is the best one for using ?

now I'm really confuse

It means the script doesn't know (yet) what your low-freqency multiplier is. Some Ivy are 12 and some can be 8. The script assumes 12 if it is not known. You can use AppleIntelCPUPowerManagementInfo.kext to determine what your LFM is. See: http://www.tonymacx86.com/mavericks...vericks-native-cpu-igpu-power-management.html

The two files are essentially the same. Only difference: The one from the ProBook Installer is without debug code...

 

[pabloesco]

It means the script doesn't know (yet) what your low-freqency multiplier is. Some Ivy are 12 and some can be 8. The script assumes 12 if it is not known. You can use AppleIntelCPUPowerManagementInfo.kext to determine what your LFM is. See: http://www.tonymacx86.com/mavericks...vericks-native-cpu-igpu-power-management.html

The two files are essentially the same. Only difference: The one from the ProBook Installer is without debug code...

this is some awkward error , I'm using your maciasl


i just boot , in clover only with C P state to create a proper SSDT. and this happened when i try to open it.
it works in .dsl format to be opened
ssdtPRgen.sh was using to generate the file.
HPprobook is not working . got some error.

Jun 10 18:20:17 pauls-MacBook-Air.local Installer[805]: IFJS: *** exception: TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')Jun 10 18:20:18 pauls-MacBook-Air.local Installer[805]: IFJS: *** exception: TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
Jun 10 18:20:18 pauls-MacBook-Air.local Installer[805]: IFJS: *** exception: TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
Jun 10 18:20:22 pauls-MacBook-Air.local installd[450]: PackageKit: ----- Begin install -----
Jun 10 18:20:23 pauls-MacBook-Air.local installd[450]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “ProBook Installer 6.1.13r3.pkg”." UserInfo=0x7fc33ad95c00 {NSFilePath=./postinstall, NSURL=file://localhost/Volumes/500HDD/utilitati/ProBook%20Installer%206.1.13r3.pkg#SSDTGenerator.pkg, PKInstallPackageIdentifier=com.MadMax.pkg.SSDTGenerator, NSLocalizedDescription=An error occurred while running scripts from the package “ProBook Installer 6.1.13r3.pkg”.} {
        NSFilePath = "./postinstall";
        NSLocalizedDescription = "An error occurred while running scripts from the package \U201cProBook Installer 6.1.13r3.pkg\U201d.";
        NSURL = "file://localhost/Volumes/500HDD/utilitati/ProBook%20Installer%206.1.13r3.pkg#SSDTGenerator.pkg";
        PKInstallPackageIdentifier = "com.MadMax.pkg.SSDTGenerator";
    }
Jun 10 18:20:24 pauls-MacBook-Air.local Installer[805]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Jun 10 18:20:24 pauls-MacBook-Air.local Installer[805]: Displaying 'Install Failed' UI.
Jun 10 18:20:24 pauls-MacBook-Air.local Installer[805]: 'Install Failed' UI displayed message:'The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.'.

 

[pabloesco]

i manage to fix it, i don't know if the ssdt and dsdt are working well.
strange things happened

 

[RehabMan]

this is some awkward error , I'm using your maciasl
View attachment 95679

i just boot , in clover only with C P state to create a proper SSDT. and this happened when i try to open it.
it works in .dsl format to be opened
ssdtPRgen.sh was using to generate the file.

No idea without the actual file you're trying to open...

HPprobook is not working . got some error.

Perhaps you do not have an /Extra folder. If you're using Clover, you should use the ProBook Installer Clover Edition.