Contribute
Register

GA-Z77X-UD5H, Core i7 3770, GTX 660 - Success

Status
Not open for further replies.
Joined
May 9, 2013
Messages
53
Motherboard
Asus ROG Strix Z390-I Gaming
CPU
i7-9700K
Graphics
UHD 630
Mobile Phone
  1. iOS
In a few words, i did all following this guide - http://www.tonymacx86.com/374-unibeast-install-os-x-mavericks-any-supported-intel-based-pc.html

Everything booted without any flags (that was suprise for me;)). Even network worked after 1st launch (before MultiBeast setup)

So here is my MultiBeast setup:
Screen Shot 2013-10-26 at 6.36.35 AM.png

Audio - works
Network - works
Graphics - works

Hmm, what else...? iMessages i don't use, but it launches. Don't know if it actually works.

This is my first Guide, so please sorry, if smth is wrong :)
 
I have the same build but with a 3770K and GTX 660 Ti. I will try to use your settings for Multibeast when I get home but does the system reboot directly into the boot drive for OS X without error? When I had my setup everything worked except audio (which was fixed by multi beast), iMessage and would not reboot without still using the USB stick.

Please let me know as I will also update you if your settings worked for me.
 
i have the same basic setup, but i can't get the internal sata to work.. trying your exact settings now, thanks for the info btw!
 
no such luck for me :(

it still hangs on USBMSC then says "Still Waiting for Root Device"
 
In a few words, i did all following this guide - http://www.tonymacx86.com/374-unibeast-install-os-x-mavericks-any-supported-intel-based-pc.html

Everything booted without any flags (that was suprise for me;)). Even network worked after 1st launch (before MultiBeast setup)

So here is my MultiBeast setup:
View attachment 71107

Audio - works
Network - works
Graphics - works

Hmm, what else...? iMessages i don't use, but it launches. Don't know if it actually works.

This is my first Guide, so please sorry, if smth is wrong :)


stasivanov, I'm curious - on boot options, I see you have 1080p display mode. Does this make the boot screens take up the entire monitor? I've had big underscan problems in the past, but does this option fix them? Also, is this option new? I haven't seen it in the past.

Also, does HDMI audio work natively?
 
stasivanov,

Don't use the Sandy Bridge i7 SSDT for a Ivy Bridge processor! Here's what I used for my Thunderball system - it's all you need:
72053-thunderball-mb6-6.png

It's all you need. :thumbup:
 
Last edited by a moderator:
i'm still not getting the internal sata to work...

meaning... i can boot up via ssd via a usb3 enclosure ... it's faster than hdd, but i wanna be able to boot it up sata3 internal obviously... so annoying :(

i have a 960gb ssd, but it would be nice to be able to access my other drives too

also i have a raid setup previously on windows.. but i don't think the onboard controllers are working (btw, i have paragon ntfs, so it can read ntfs no problem via usb external)
 
stasivanov,

Don't use the Sandy Bridge i7 SSDT for a Ivy Bridge processor! Here's what I used for my Thunderball system - it's all you need:
72053-thunderball-mb6-6.png

It's all you need. :thumbup:
Can i somehow remove that setup without new clean install...? So i don't know how can i just remove only that option...

And second. I want to buy Gigabyte GTX 760, now i have GTX 660. Will i have to do any additional setup after setting up new graphics card?
 
Last edited by a moderator:
Status
Not open for further replies.
Back
Top