- Joined
- Aug 31, 2012
- Messages
- 16
- Motherboard
- Intel
- CPU
- Intel I7 3770K IVY BRIDGE
- Graphics
- Gigabyte GV-N670OC-2GD GF GTX 670 OC EDITION
- Mac
- Classic Mac
- Mobile Phone
Hi guys,
Unfortunately I got a problem with my hackintosh since I upgraded to Yosemite.
My Mavericks installation was working perfectly (except iMessage). Sleep, USB3 etc was all good. I used this guide a while back: http://www.tonymacx86.com/golden-bu...d5h-i7-3770k-gigabyte-geforce-gtx-660-ti.html
I upgraded to Yosemite using this guide: http://www.tonymacx86.com/yosemite-...-clover-uefi-guide-gigabyte-ga-z77x-ud5h.html
I cloned my working Mavericks installation onto my second SSD using Carbon Copy Cloner to have a backup.
THE PROBLEM
After installing Yosemite with Clover things got a bit out of hand. My PC started to play up quite a bit. I got kernel panics right after the boot. Sometimes 10-20 min after booting. Another strange thing that happened was boot loops when I was booting cold (first thing in the morning or leaving the PC powered off for a while).
I would press the power button. The PC turns on and about 5 sec later it would just restart. Sometimes for 3-6 times. Sometimes before anything shows. Sometimes after the clover screen.
If it boots eventually it would kernel panic after a while.
THINGS I TRIED
I had issues with my PSU before. The first thing I tried was using an old PSU from my first Hackintosh. That didn't improve anything. Updating the BIOS to the later beta version did not improve anything either. Even unplugging all the other HDD and Wifi card did not change the boot loops or the kernel panics. I installed the OS several times with different USB sticks and redownloaded Yosemite from the App store to make sure this is not the problem. I did a CMOS reset and even tried out a modded BIOS (F16 mod11)
At the moment I am booting into the Yosemite SSD but when the Clover screen comes up I select my Mavericks SSD. This seems to work and I don't get any freezes or KP.
I am not sure what these boot loops are or where they are coming from. Not sure if these are two different problems. I would love some help if anyone has some ideas?
IN SHORT
After upgrading from a perfectly working Mavericks to Yosemite I get boot loops on cold boot and KP
MY SPECS
Thanks guys!
Unfortunately I got a problem with my hackintosh since I upgraded to Yosemite.
My Mavericks installation was working perfectly (except iMessage). Sleep, USB3 etc was all good. I used this guide a while back: http://www.tonymacx86.com/golden-bu...d5h-i7-3770k-gigabyte-geforce-gtx-660-ti.html
I upgraded to Yosemite using this guide: http://www.tonymacx86.com/yosemite-...-clover-uefi-guide-gigabyte-ga-z77x-ud5h.html
I cloned my working Mavericks installation onto my second SSD using Carbon Copy Cloner to have a backup.
THE PROBLEM
After installing Yosemite with Clover things got a bit out of hand. My PC started to play up quite a bit. I got kernel panics right after the boot. Sometimes 10-20 min after booting. Another strange thing that happened was boot loops when I was booting cold (first thing in the morning or leaving the PC powered off for a while).
I would press the power button. The PC turns on and about 5 sec later it would just restart. Sometimes for 3-6 times. Sometimes before anything shows. Sometimes after the clover screen.
If it boots eventually it would kernel panic after a while.
THINGS I TRIED
I had issues with my PSU before. The first thing I tried was using an old PSU from my first Hackintosh. That didn't improve anything. Updating the BIOS to the later beta version did not improve anything either. Even unplugging all the other HDD and Wifi card did not change the boot loops or the kernel panics. I installed the OS several times with different USB sticks and redownloaded Yosemite from the App store to make sure this is not the problem. I did a CMOS reset and even tried out a modded BIOS (F16 mod11)
At the moment I am booting into the Yosemite SSD but when the Clover screen comes up I select my Mavericks SSD. This seems to work and I don't get any freezes or KP.
I am not sure what these boot loops are or where they are coming from. Not sure if these are two different problems. I would love some help if anyone has some ideas?
IN SHORT
After upgrading from a perfectly working Mavericks to Yosemite I get boot loops on cold boot and KP
MY SPECS
- 1 x Gigabyte GA-Z77X-UD5H
- 1 x Intel I7 3770K IVY BRIDGE CPU
- 1 x Gigabyte GV-N670OC-2GD GF GTX 670 OC EDITION PCI-E 3.0 2GB
- 1 x Corsair AX-850 ATX Power Supply
- 2 x G.Skill F3-1600C9D-16GXM DDR3-1600 16GB Dual Channel
- 1 x TP-Link TL-WDN4800 450Mbps Wireless N Dual Band PCI-Express Adapter
- 1 x CoolerMaster HYPER-212-EVO Hyper 212 EVO CPU Cooler
- 1 x Fractal Design CASE-FDR4B Define R4 USB3.0 Mid Tower Case Black
- 1 x OCZ AGT4-25SAT3-128G SSD 128GB
Thanks guys!