- Joined
- Jul 9, 2012
- Messages
- 5
- Motherboard
- GigaByte Z370XP SLI
- CPU
- i7-8700K
- Graphics
- GTX 1080TI
- Mac
- Mobile Phone
[SOLVED] GA-Z77-DS3H (i3-2100) fails to load AppleIntelSNBGraphicsFB
Hi
I have followed tony's instruction for Mountain Lion and UniBeast. But the setup fails
to load graphics and show me the introduction screen of MLion.
I have tried all combination of PCIRootUID, GraphicsEnabler, as well as resetting the BIOS
to default value and only setting the HD mode to AHCI. I am also connecting my monitor
to DVI port.
I also inserted my GTS250 into motherboard and tried again, this time it said
nVidia kext was successfully loaded and then monitor went completely blank
and started showing its default screen saver! although I could see some disk activity
on the USB flash!
These are the last logs on the screen when I was only using the onboard Intel graphics chipset:
- OSMetaClass: Kext com.apple.driver.AppleIntelSNBGraphicsFB class HDCPtrl is a duplicate;kext com.apple.driver.AppleIntelFrabebufferCapri already has a class by that name.
- Kext com.apple.driver.AppleIntelSNBGraphicsFB start failed (result 0xdc00400a)
- Kext com.apple.driver.AppleIntelSNBGraphicsFB failed to load (0xdc008017)
- ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
- DSMOS has arrived
- [IOBluetoothHCIController][start] -- completed
- AtherosL1cEthernet : Ethernet address (removed)
I should also add the current system is running Lion perfectly (using UniBeast/MultiBeast):
GA-Z77-DS3H (F6)
Intel i3-2100 @ 3.1GHz
Crosair 2x4GB RAM
Any input/hint is appreciated
Hi
I have followed tony's instruction for Mountain Lion and UniBeast. But the setup fails
to load graphics and show me the introduction screen of MLion.
I have tried all combination of PCIRootUID, GraphicsEnabler, as well as resetting the BIOS
to default value and only setting the HD mode to AHCI. I am also connecting my monitor
to DVI port.
I also inserted my GTS250 into motherboard and tried again, this time it said
nVidia kext was successfully loaded and then monitor went completely blank
and started showing its default screen saver! although I could see some disk activity
on the USB flash!
These are the last logs on the screen when I was only using the onboard Intel graphics chipset:
- OSMetaClass: Kext com.apple.driver.AppleIntelSNBGraphicsFB class HDCPtrl is a duplicate;kext com.apple.driver.AppleIntelFrabebufferCapri already has a class by that name.
- Kext com.apple.driver.AppleIntelSNBGraphicsFB start failed (result 0xdc00400a)
- Kext com.apple.driver.AppleIntelSNBGraphicsFB failed to load (0xdc008017)
- ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
- DSMOS has arrived
- [IOBluetoothHCIController][start] -- completed
- AtherosL1cEthernet : Ethernet address (removed)
I should also add the current system is running Lion perfectly (using UniBeast/MultiBeast):
GA-Z77-DS3H (F6)
Intel i3-2100 @ 3.1GHz
Crosair 2x4GB RAM
Any input/hint is appreciated