- Joined
- Sep 29, 2012
- Messages
- 1
- Motherboard
- Ga-H55m-d2h
- CPU
- i7
- Graphics
- Nvidia 8400
- Mac
- Classic Mac
- Mobile Phone
GA-Z77 D3H SIERRA CLOVER GUIDE
i7 3.4 GHz
16 GB ram
240 GB Corsair FORCE LE 200
AMD 7xxx
Set the BIOS: AHCI, disable VT-d, UEFI-mode only
Boot with UniBeast USB.
No boot flag is needed.
Do the install and boot one more time from USB, select HFS
No boot flag is needed.
Use MultiBeast to install
This was the easy part.
The tricky part is to get the VIA VT2021 audio and the Atheros GbE LAN chip (10/100/1000 Mbit) to work.
The Ethernet card is not shown in the System Information. (No Ethernet card on this system is fond)
Open Clover Configurator:
Check AFGlowpowerstate
Use this guide to get the audio to work
http://www.insanelymac.com/forum/files/file/622-via-vt2020vt2021/
Download the AppleHDA{278.56} v.2.zip
Rename the DSDT HDEF.rtf to DSDT HDEF.aml place it in EFI/Clover/ACPI/patches
then Drop it in Clover Configurator “DSDT name”
LAN
AtherosL1cEthernet.kext
Drop the pached AppleHDA.kext and AtherosL1cEthernet.kext on Kext Utility icon.
Restart.
Voila, it work, Audio, LAN and Graphics
Sleep is almost never working without a proper DSDT. (DSDT HDEF.aml is only for the audio.)
disable sleep in system preerence.
Select proper audio out in system setting. In my case: Internal speaker.
Only 2 of 4 USB 3,0 is working (not tested if it work as a 3,0 or just 2,0)
i7 3.4 GHz
16 GB ram
240 GB Corsair FORCE LE 200
AMD 7xxx
Set the BIOS: AHCI, disable VT-d, UEFI-mode only
Boot with UniBeast USB.
No boot flag is needed.
Do the install and boot one more time from USB, select HFS
No boot flag is needed.
Use MultiBeast to install
FakeSMC.kexst
NullCPUPowerManagement.kext
Clover v2,4 r4063 UEFI boot mode
NullCPUPowerManagement.kext
Clover v2,4 r4063 UEFI boot mode
This was the easy part.
The tricky part is to get the VIA VT2021 audio and the Atheros GbE LAN chip (10/100/1000 Mbit) to work.
The Ethernet card is not shown in the System Information. (No Ethernet card on this system is fond)
Open Clover Configurator:
Acpi:
check, FIXLAN, FIXHDA
Audio
Patched AppleHDA.kext
Devices:
Audio id: 9check, FIXLAN, FIXHDA
Audio
Patched AppleHDA.kext
Devices:
Check AFGlowpowerstate
Use this guide to get the audio to work
http://www.insanelymac.com/forum/files/file/622-via-vt2020vt2021/
Download the AppleHDA{278.56} v.2.zip
Rename the DSDT HDEF.rtf to DSDT HDEF.aml place it in EFI/Clover/ACPI/patches
then Drop it in Clover Configurator “DSDT name”
LAN
AtherosL1cEthernet.kext
Drop the pached AppleHDA.kext and AtherosL1cEthernet.kext on Kext Utility icon.
Restart.
Voila, it work, Audio, LAN and Graphics
Sleep is almost never working without a proper DSDT. (DSDT HDEF.aml is only for the audio.)
disable sleep in system preerence.
Select proper audio out in system setting. In my case: Internal speaker.
Only 2 of 4 USB 3,0 is working (not tested if it work as a 3,0 or just 2,0)
Last edited: