GA-Z68X-UD3H-B3 Don't Install,Stuck...

[longagokids]

Hello.
I am troubled very much not to be able to install Mountain Lion.
It allowed I used UniBeast(ver.1.5) and to install it from USB Pendrive so that Tony's guided.

But, When it starts from USB, I push the F12 key, and the following errors are given even if I choose a USB-HDD, and installation does not advance.

Loading Operating System.....
boot0: done
boot1: error

I tried the method to install via a DVD drive from rBoot(Burn the ML image to DVD DL).
However, I return to a screen of original rBoot after reading a disk of ML by this method for several seconds.
Of course, I cannot go ahead for a stage to install it.

On earth it is unknown what is bad.
Lion is installed in this system, and this OS X works normally now.
System which I use and USB Pendrive are as follows.

MB: Gigabyte GA-Z68X-UD3H-B3 (BIOS F12)
RAM: 8GB (4GB x2)
HDD: 500GB (Seagate)
DVD: Pioneer Super Multi Drive
VGA: Geforce 520GT
USB Pendrive: Transcend Ultra Speed 16GB

Help me! Thanks.

 

[traderjb]

I had the same thing happen to me. All I did was change the boot setting in the bios and everything went smooth. I hope this helps.

 

[longagokids]

I had the same thing happen to me. All I did was change the boot setting in the bios and everything went smooth. I hope this helps.

Change the Boot Setting?
My BIOS Boot setting...

First: CD-ROM
Second: USB-HDD
Third: Disabled

Which item should I change how?
Please teach.

 

[traderjb]

Swap your CD-ROM with your USB-HDD, its what I did. I hope that works for you.

 

[longagokids]

Swap your CD-ROM with your USB-HDD, its what I did. I hope that works for you.

BIOS setting change.

First: USB-HDD
Second: CD-ROM
Third: Disabled

This working Lion, but, not work the unibeast.
Same error.

boot0: done
boot1: error

*
NEXT, test setting.

First: Hard Disk
Second: USB-HDD
Third: Disabled

Boot the Lion, but, kernel panic down...

Please help me!
Regard.

 

[rdunseith]

Got my USB drive built. I've tried all your suggestions. Boots to white screen. Mouse cursor is movable but no prompts. Just a white screen with an arrow(thk). jk

 

[longagokids]

I do not know what is a cause well. Will it be bad that Lion has been already installed?
Or will malfunction occur when USB pendrive is 16gb?
Should I give up the upgrading to ML?

 

[ReneKnaake]

Fix

Got my USB drive built. I've tried all your suggestions. Boots to white screen. Mouse cursor is movable but no prompts. Just a white screen with an arrow(thk). jk

Check the other posts on this forum. You need to delete/reinstall the ATI6000.kext.

 

[powerpcg5]

You may also have to use PCIRootUID=0 during the UniBeast booting.
For me, I had to. Otherwise I was just getting stuck at the white screen.

 

[ReneKnaake]

Try

I do not know what is a cause well. Will it be bad that Lion has been already installed?
Or will malfunction occur when USB pendrive is 16gb?
Should I give up the upgrading to ML?

Just try an other USB2 pendrive, run uniBeast again. I used a 500GB drive, so 16 won't be a problem. I have the same mobo and GPU as you and had no issues at all when upgrading to ML.