- Joined
- May 13, 2011
- Messages
- 2
- Motherboard
- Gigabyte GA-Z68P-DS3 F9
- CPU
- i7-2600K
- Graphics
- Gigabyte ATI 5770
- Mac
- Classic Mac
- Mobile Phone
So this has been extremely frustrating. I just had to ditch a GA-X58A-UD3R build that I've been using for almost two years (mobo burned out) and I have my new build up and running... almost. Installed and updated to 10.6.8 and audio, video, network work fine, sleep doesn't work (USB freezes on wakening and with no way to control anything I have to restart) but that's not a huge deal. The real problems are these:
1. App Store doesn't work. I get an "unknown error" every time I try and log in -so I can't purchase Mountain Lion to try and install it and see if that will fix my other major problem...
2. My internal USB card reader shows up in System Profiler under "USB" as USB 2.0 MultiCard R/W, but when I insert a card, it doesn't mount. So, I tried to use my external USB multicard reader which has worked on every computer I have ever tried it on, and it won't mount there either. With either one, the light comes on when a card is inserted, it just never shows up on the computer.
Very strange, and I haven't been able to find the same problem in the forums anywhere... Any help would be greatly appreciated as I really need to access the images on that card (work related)!
Here's my build specs:
AG-Z68P-DS3 (F9 BIOS)
i7-2600K CPU
Gigabyte ATI Radeon HD 5770
16GB Corsair RAM
Snow Leopard 10.6.8 (fully updated) loaded on an OCZ-Vertex SSD
Thanks in advance!
1. App Store doesn't work. I get an "unknown error" every time I try and log in -so I can't purchase Mountain Lion to try and install it and see if that will fix my other major problem...
2. My internal USB card reader shows up in System Profiler under "USB" as USB 2.0 MultiCard R/W, but when I insert a card, it doesn't mount. So, I tried to use my external USB multicard reader which has worked on every computer I have ever tried it on, and it won't mount there either. With either one, the light comes on when a card is inserted, it just never shows up on the computer.
Very strange, and I haven't been able to find the same problem in the forums anywhere... Any help would be greatly appreciated as I really need to access the images on that card (work related)!
Here's my build specs:
AG-Z68P-DS3 (F9 BIOS)
i7-2600K CPU
Gigabyte ATI Radeon HD 5770
16GB Corsair RAM
Snow Leopard 10.6.8 (fully updated) loaded on an OCZ-Vertex SSD
Thanks in advance!