GA-B75M-D3H/D3P - Multibeast 5.5.0 and Update 10.8.5 Causing Delayed Boot

[spang1974]

Dear All,

Unfortunately when using audio kexts from Multibeast 5.5.0 upon update to 10.8.5 with a GA-B75M-D3H motherboard ( possibly along with a GF210 card as well) you get working audio however a delay in boot times as well as unresponsive mouse/keyboard upon booting.

The workaround used to entail using audio kexts from Multibeast 5.0.2 however these are not compatible with 10.8.5.

A few of us are not happy with the delayed boot times, or unresponsive mouse....

Is there anything we can do? or should we just live with it?

Anybody with this same Motherboard not having this problem? if so what are your hardware specs and what settings are you using?

And lastly, would it be possible to build an audio kext to provide a wrokaround? if so where would I begin to do such a thing?

Thanks in advance for reading this, and please post if you are using this board as well as if you are experiencing the same issue.

Thanks
Spang1974

A similar thread already posted regarding this issue:
http://www.tonymacx86.com/general-h...-respond-until-5-10-minutes-after-boot-2.html

 

[toleda]

Unfortunately when using audio kexts from Multibeast 5.5.0 upon update to 10.8.5 with a GA-B75M-D3H motherboard ( possibly along with a GF210 card as well) you get working audio however a delay in boot times as well as unresponsive mouse/keyboard upon booting.

See USB Start-up Problem (aka the Audio problem)