I'm running into a roadblock on install of 10.11.5 on this board, I get past the Clove boot screen attempting initial installation, and I seen the rundown of commands being executed, for about 10 seconds, then reboot, each time. Couple notes and questions:
- When downloading all the required files, there are two links each that download zip files titled EFI Installer and EFI System; I've tried both EFI Installer folders on the Unibeast USB with the same result with both... which to use?
- I tried to match the settings from the OP in the BIOS but the bios version must be different because my BIOS screen looks vastly different. Most of the options are the same, but for instance, the OP says "I run Clover UEFI and want CMS disabled so unlike the Asus boards we need a different way to choose "Other OS", set these options:" but doesnt state the alternative, I'm used to disabling CMS on Asus Boards but can't see where the relevant option is chosen here.
- My setup FWIW is the x99 matx Gaming5 / Xeon 2697v4 (i'm already concerned about OS recognition and issues related) / 4x8GB DDR4 3200 DDR4 (running at 2133 because while the board supports 3200, and the chip supports 2400, the machine fails to boot on anything by 2133 with this setup... not my biggest concern at the moment)
- I can't boot with XMP enabled, so I don't, I assume this isn't the problem.
Any help on the reboot issue is appreciated... I'm anxious to see what 18 cores can do.