Contribute
Register

Fix Sleep on Sierra

Status
Not open for further replies.

Attachments

  • Sierra-Sleep-ryguy77.ioreg
    5.6 MB · Views: 141
IOReg attached. I read in one of the threads that LPC isn't compatible with Skylake...don't know if that is accurate or not.

Thanks again.

Patching LPC on some Skylake machines has fixed some issues.
 
Patching LPC on some Skylake machines has fixed some issues.

Machine was in Sleep overnight and woke up as expected this morning. Don't know if the issue is fixed or not as the issue seemed somewhat intermittent before these updates were made. Still would like to get things setup and running as clean as possible though.
 
Ioreg looks better. But USB 2 is coming under EHC1, EHC2 which should be EH01 & EH02. USB 3 is coming under XHCI instead of XHC. Better to rename EHC1 to EH01 & EHC2 to EH02, XHCI to XHC to bypass the 15 port restrictor in 10.10+.

Thank you for the input.

I have now edited my DSDT with MaciASL.
I used find and replace and changed

EHC1 to EH01
EHC2 to EH02
XHCI to XHC

In IoReg it shows that the renaming of the USB 2 seems to have worked but the USB 3 is still under XHCI.

Do you have any suggestions?

My best regards.
 

Attachments

  • 170122_bigwegh_imac.ioreg
    5 MB · Views: 140
Thank you for the input.

I have now edited my DSDT with MaciASL.
I used find and replace and changed

EHC1 to EH01
EHC2 to EH02
XHCI to XHC

In IoReg it shows that the renaming of the USB 2 seems to have worked but the USB 3 is still under XHCI.

Do you have any suggestions?

My best regards.

Attach DSDT. Cant do much without it.
 

Attachments

  • 170123_bigwegh_DSDT.aml
    44.2 KB · Views: 143
Status
Not open for further replies.
Back
Top