FIX for boot hangs after BIOS update (ACPI PATCH)

[Bustycat]

Thank You, I cleaned the unuseful files and things go better now.
Only a trouble remains, I dealt with also some time ago when I was unable to use the Logitech mouse connected through a receiver to the Mac. Keyboard worked but the mouse didn't. I solved everything with the Logitech Control Center app. Now, if I boot with Clover everything is ok. On the contrary, booting with OC 0.6.3 and VoodooPS2Controller.kext rel. 2.1.8 the keyboard works but the mouse doesn't (pointer moves on the screen but does nothing, so I have to connect a cable optical mouse). LCC doesn't see any device to configure. Is there any specific quirk to setup? What do I miss?

You don’t really need that kext for a mouse connected via a USB receiver.

 

[rommy]

You don’t really need that kext for a mouse connected via a USB receiver.

Ok thank you, I will try. But I succeeded previosly within Clover boot just adding the LCC package. I also had the voodooPS2 kext. Sincerely I didn't try removing it

 

[deeveedee]

This is an ACPI Patch for the people who update to the last bios and can't boot.
My board is the MSI B360A-Pro and has the latest bios 7B22v27.

Your ACPI patched resolved the boot issue I was having on an HP EliteDesk 800 G3 Mini with i7-7700T and Q270 chipset. Thank you!

System Specs:

• HP EliteDesk 800 G3 Mini, i7-7700T, Q270 Chipset
• BIOS: 02.37 Rev.A (November 6, 2020)

 

[controlremoto14]

Motherboard base: Asus B45M-A / CSM
CPU: AMD Ryzen 5 3600X
GPU: Sapphire RX590
RAM: 2 x 8 Gb
SSD: 480Gb Kingston A400
PSU: EVGA 850W 80 Plus Bronze
Boot: OpenCore v0.6.3 (working with OpenCore v0.5.9-v0.6.3)
S.O .: MacOS Catalina and Windows 10 LTSC (Dual-Boot on SSD only)

Without problem I was working with MacOS Catalina for more than 6 months. I wanted to upgrade the CPU from a Ryzen 5 3600X to a Ryzen 5 5600X as a Christmas present while keeping the same Motherboard. Update the BIOS from v2202 to v2409 on my Motherboard to achieve compatibility with the Ryzen 5 5600X CPU, the detail is that with this BIOS v2409 it gets stuck on MacOS Catalina boot.
I found this link FIX for boot hangs after BIOS update (ACPI PATCH) | Page 5 | tonymacx86.com, as proof of the possibility of continuing to work with MacOS Catalina on my computer. Any comment and / or help is welcome, Thank you.

 

[jayw8888]

Gigabyte Z370 HD3 updated BIOS F8 to F12 in preparation to change CPU to i9-9900k.

Added patch and boots up as normal. Running OSX 10.13.6

Thanks.

 

[timsnow]

Hey guys! I was using catalina with this acpi patch on z370hd3 mobo with bios f14b. I would like to clean install big sur with opencore. Do i still have to apply this patch somehow? Thanks!

 

[jcds83]

Hey guys! I was using catalina with this acpi patch on z370hd3 mobo with bios f14b. I would like to clean install big sur with opencore. Do i still have to apply this patch somehow? Thanks!

I am on OC since almost one year and I still use it. Here is a screen capture of my config.plist

Good luck!

 

[Feartech]

I am on OC since almost one year and I still use it. Here is a screen capture of my config.plist
View attachment 508105
Good luck!

you have yours disabled?

 

[Bustycat]

I am on OC since almost one year and I still use it. Here is a screen capture of my config.plist
View attachment 508105
Good luck!

You actually don’t use it as it has been disabled.

 

[jcds83]

You actually don’t use it as it has been disabled.

Right. My bad!
I remember now. I made a try in disabling it and looks like I don't need it.