Final cut Pro x - High Sierra

[sandonanet]

Hello everyone
I have the following hardware configuration:
GA-Z87X-UD3H
i7-4770k
32gb
2x GeForce GTX 1060 3gb
SSD 500gb
Everything works perfectly, but I built this hack to work with final cut (Final Cut Pro X 10.4)
Now I have installed High Sierra 10.13.2
My problems are in video editing, the film loses fluidity in the preview.
With the hardware monitor I saw that the cpu goes to 120%, it seems not to use all the cores.
I have done cinebench and geekbench tests and the system is able to completely use the cores
Thinking that there were settings in final cut to use the core I tried all the menus but nothing.

Does anyone have any suggestions?

Thank you

 

[Feartech]

Hello everyone
I have the following hardware configuration:
i7
32gb
2x GeForce GTX 1060 3gb
SSD 500gb
Everything works perfectly, but I built this hack to work with final cut (Final Cut Pro X 10.4)
Now I have installed High Sierra 10.13.2
My problems are in video editing, the film loses fluidity in the preview.
With the hardware monitor I saw that the cpu goes to 120%, it seems not to use all the cores.
I have done cinebench and geekbench tests and the system is able to completely use the cores
Thinking that there were settings in final cut to use the core I tried all the menus but nothing.

Does anyone have any suggestions?

Thank you

As per rules, please update your hardware profile to allow others to help you easier
https://www.tonymacx86.com/account/

hack is not a motherboard I have heard off before, also i5 is a bit vague

 

[abds69]

Same with ATI R9 280X, no more GPU acceleration with HS and FCPX 10.4