- Joined
- Mar 10, 2022
- Messages
- 1
- Motherboard
- ASRock Fatal1ty B250M Performance
- CPU
- I7 7700
- Graphics
- ASUS Radeon RX 580 Dual 8GB OC
Hallo,
i built a Hackintosh from leftover hardware and everything is running fine.
Now I'm still busy with the subtleties and can't get any further at one point.
It's not that important, but ugly.
I can read all the sensors (temperature, etc.), but the fan speed display is wrong.
It is permanently set to 16383 rpm and does not change.
I have already exchanged the VirtualSMC (incl. the additional kextes) for the FakeSMC package, but the same thing is displayed here.
What can I do ?
Thanks for your help.
FYI: I installed an AIO water cooling system from BeQuit (PureLoop), but the pump is connected directly to the power supply.
The fan for the radiator runs over the mainboard (CPU fan header). All RPMs (CPU fan & System fan) are displayed correctly in the bios.
i built a Hackintosh from leftover hardware and everything is running fine.
Now I'm still busy with the subtleties and can't get any further at one point.
It's not that important, but ugly.
I can read all the sensors (temperature, etc.), but the fan speed display is wrong.
It is permanently set to 16383 rpm and does not change.
I have already exchanged the VirtualSMC (incl. the additional kextes) for the FakeSMC package, but the same thing is displayed here.
What can I do ?
Thanks for your help.
FYI: I installed an AIO water cooling system from BeQuit (PureLoop), but the pump is connected directly to the power supply.
The fan for the radiator runs over the mainboard (CPU fan header). All RPMs (CPU fan & System fan) are displayed correctly in the bios.