Contribute
Register

FakePCIID: Broadcom BCM57XX network OOB

Status
Not open for further replies.
FakePCIID: BCM577X as BCM57765 [Testers Required!]

The first post has been updated with the release version of FakePCIID BCM577X as BCM57765.

Rehabman, could you update the title to "FakePCIID: Broadcom BCM57XX network OOB"
 
I juist noticed something interesting, messages and iCloud is now working.
 
These kexts make enabling Ethernet so much easier, thanks! So I put FakePCIID.kext into the efi partition and the FakePCIID_BCM57XX_as_BCM57765.kext into /S/L/E and Ethernet still works.
 
These kexts make enabling Ethernet so much easier, thanks! So I put FakePCIID.kext into the efi partition and the FakePCIID_BCM57XX_as_BCM57765.kext into /S/L/E and Ethernet still works.

A bit strange to put the two kexts in separate locations... Probably best to decide where you want to put them and stick with it.
 
Hi, I've installed this kexts for BCM57786 and card is recognized (I didn't tested if it works), but strange output is generated constantly in verbose mode:
FakePCIID: configRead32(0x00), result 0x16b314e4 -> 0x16b414e4
10945735_504291426377045_2306484133190309377_o.jpg


and when I shutdown or restart, again this output appears. Is it normal?
Using Mavericks 10.9.5
 
Hi, I've installed this kexts for BCM57786 and card is recognized (I didn't tested if it works), but strange output is generated constantly in verbose mode:
FakePCIID: configRead32(0x00), result 0x16b314e4 -> 0x16b414e4


It is normal FakePCIID output. It will write a log whenever a return value is remapped.
 
Hello !
This method working great on for me... :thumbup:

ASRock 990FX-Extreme3
AMD FX8150
LAN Broadcom BCM 57781
Yosemite 10.10

THNX
 
Status
Not open for further replies.
Back
Top