FakePCIID: Broadcom BCM57XX network OOB

[TheTobii]

Have you aplied the interface in Network settings?

Yes. But usually if it finds a new card it automatically shows up. Not here I have to manually add it.

 

[RehabMan]

Still isn't working for me
Again the same problem, but this time the logs are gone (as expected).
What I also noticed that it shows the wrong name in system profiler.

According to ioreg and your image in this post, it is working.

 

[RehabMan]

Ok, I merged Rehabman's changes and attached a new version to the first post.
No logging will be done in this release build, so you should not notice the slowdown.

@everyone,

New build of everything uploaded to bitbucket. See post #1 for link.

 

[TheTobii]

According to ioreg and your image in this post, it is working.

But it isn't working it always says "Cable Unplugged" whether it is plugged in or not.
Tried it also with the new version you uploaded, but same result.

 

[RehabMan]

But it isn't working it always says "Cable Unplugged" whether it is plugged in or not.
Tried it also with the new version you uploaded, but same result.

Could be chip is incompatible with the driver.

 

[TheTobii]

Could be chip is incompatible with the driver.

Then Darkvoid should remove this line in the compatibility list:
Broadcom NetLink BCM57780 Gigabit Ethernet PCIe [14e4:1692]

 

[RehabMan]

Then Darkvoid should remove this line in the compatibility list:
Broadcom NetLink BCM57780 Gigabit Ethernet PCIe [14e4:1692]

Probably need someone else to confirm. At the very least, you should do a fresh install (perhaps in previous efforts to make it work, you've damaged your install).

 

[rals2007]

I dont have the hardware but im just curious... No need to use clover fakeid together with this driver?

 

[RehabMan]

I dont have the hardware but im just curious... No need to use clover fakeid together with this driver?

For this application of FakePCIID, no (or to answer your question directly... 'correct').

 

[rals2007]

For this application of FakePCIID, no (or to answer your question directly... 'correct').

Allow me to ask a real quick off-topic please... So you dont even need clover's fakeid to have HD42000-HD46000 working as describe here http://www.tonymacx86.com/yosemite-...tel-hd4200-hd4400-hd4600-mobile-yosemite.html ?